Important compatibility info
Inner diameter | 14.1 mm |
Diameter | 33.7 mm |
Length | 69 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6856 |
Placement on Vehicle | Front Axle, Left, Right, Front |
Important compatibility info
Function | Bushing, axle beam |
Type | Bushing, axle beam |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information 2 | without bearing |
Function | Suspension Strut Support Mount |
Paired article numbers | FSM5409 |
Type | Suspension Strut Support Mount |
Important compatibility info
Placement on Vehicle | Rear Axle, Right, outer |
Length | 172 mm |
Thread Measurement 1 | M10x1 |
Thread Type | with external thread |
Thread Measurement 2 | M10x1 |
Function | Brake Hose |
Type | Brake Hose |
Important compatibility info
Inner diameter 2 | 35 mm |
Inner diameter 1 | 35 mm |
Placement on Vehicle | Centre, Right, Lower |
Material | Silicone |
Colour | Black |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1001S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1101S)
Important compatibility info
Thread Measurement 1 | M16x1.0 |
Thread Type | with right-hand thread, with external thread |
Function | Tie Rod End |
Type | Tie Rod End |
Important compatibility info
Axle Joint Length | 325 mm |
Thread Measurement 2 | M16X1.5 |
Length | 325 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Axle Joint Thread Type | with right-hand thread, with external thread |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 2 | M14X1.5 |
Length | 312 mm |
Thread Measurement 1 | M14X1.5 |
Function | Inner Tie Rod |
Axle Joint Thread Type | with external thread |
Axle Joint Length | 312 mm |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Material | Plastic |
for OE number | 1J0 121 087 A |
Function | Coolant Flange |
Type | Coolant Flange |
Important compatibility info
Width 1 | 44 mm |
Outer diameter 1 | 78 mm |
Inner diameter 1 | 42 mm |
Bearing Code | Gen 1 |
Additional Information 2 | with integrated ABS sensor |
Function | Wheel Bearing Kit |
Placement on Vehicle | Front Axle |
Type | Wheel Bearing Kit |
Important compatibility info
Inner diameter 1 | 20 mm |
Inner diameter 2 | 25 mm |
Outer diameter 1 | 46 mm |
Width 1 | 15 mm |
Outer diameter 2 | 52 mm |
Width 2 | 16 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Bearing Code | Gen 0 |
Important compatibility info
Housing Type | without housing |
Height | 37.5 mm |
Impeller Diameter | 63 mm |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Water Pump Pulley Diameter | 44 mm |
Number of Teeth | 28 |
Type | Water Pump, engine cooling |
Important compatibility info
Function | Thermostat, coolant |
Housing material | Plastic |
Type | Thermostat, coolant |
Opening Temperature | 97 °C |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Important compatibility info
Placement on Vehicle | Front Axle Right, transmission sided |
Material | Thermoplast |
Additional Information 2 | with clamps |
Lubrication | with grease lubrication |
Type | Bellow Kit, drive shaft |
Function | Bellow Kit, drive shaft |
Extra Description | Trilobe |
Length | 91 mm |
Important compatibility info
Opening Temperature | 87 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Housing material | Plastic |
Function | Thermostat, coolant |
Important compatibility info
Number of pads | 4 |
Wear Warning Contact | prepared for wear warning indicator |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 15.8 mm |
Brake System | Brembo |
Type | Brake Pad Set, disc brake |
Height 1 | 94.3 mm |
Width 1 | 209.6 mm |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Bushing, axle cross member |
Placement on Vehicle | Front Axle, both sides, Rear |
Type | Bushing, axle cross member |
Important compatibility info
Thread Measurement 2 | M16x1.5 |
Thread Measurement 1 | M16x1.5 |
Type | Inner Tie Rod |
Axle Joint Length | 250 mm |
Function | Inner Tie Rod |
Important compatibility info
Thread Type | with internal thread |
Placement on Vehicle | Rear Axle Right |
Function | Brake Hose |
Length | 335 mm |
Additional Information | with banjo fitting |
Type | Brake Hose |
Additional Information 2 | with banjo bolt |
Thread Size | M10x1 |
Mounting Bolt Thread Size | M10x1 |
Important compatibility info
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Brake System | MERITOR ELSA 225-3 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023