Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£412.33
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Additional Information | with seal rings |
| Additional Information 2 | with bolts/screws, with nut |
| Operating Mode | Hydraulic |
| Number of Connectors / Ports | 2 |
| Type | Pump, multi-plate clutch (all-wheel drive) |
| Clutch ID | Haldex Gen III |
| Function | Pump, multi-plate clutch (all-wheel drive) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£413.03
Important compatibility info
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Number of Chain Links | 120. 82 |
| Chain Type | Simplex, Duplex, Closed chain |
| Extra Description | Full Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain Kit (102120)
- 1x Febi Timing Chain Kit (102123)
- 1x Febi Guide Rails Kit, timing chain (102141)
- 1x Febi Gasket, oil pump (103421)
£413.32
Important compatibility info
| Placement on Vehicle | Lower |
| Voltage | 12 V |
| Operating Mode | Electric |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£414.31
Important compatibility info
| Extra Description | febi Plus |
| Function | Actuator, transfer case |
| Type | Actuator, transfer case |
| Number of Connectors / Ports | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£415.29
Important compatibility info
| Type | Valve Plate, air compressor |
| Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£415.71
Important compatibility info
| Function | Throttle body |
| Type | Throttle body |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£416.67
Important compatibility info
| Number of mounting bores | 5 |
| Type | Central Slave Cylinder, clutch |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£417.02
Important compatibility info
| Type | Belt Pulley, crankshaft |
| Number of Ribs | 5 |
| Inner diameter | 40 mm |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 153 mm |
| Parameter | 6 PK |
| Width | 81 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£417.28
Important compatibility info
| Diameter 1 | 70 mm |
| Placement on Vehicle | Front Axle |
| Max. Length | 959 mm |
| Min. Length | 764 mm |
| Stroke | 195 mm |
| Piston conrod diameter | 28 mm |
| Type | Slave Cylinder, power steering |
| Piston Rod Thread | M26 x 1,5 |
| Function | Slave Cylinder, power steering |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£418.27
Important compatibility info
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle, Rear Axle |
| Function | Slave Cylinder, power steering |
| Type | Slave Cylinder, power steering |
| Length | 730 mm |
| Stroke | 196 mm |
| Pipe Diameter | 70 mm |
| Piston conrod diameter | 28 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£418.27
Important compatibility info
| Function | Tilt Cylinder, driver cab |
| Length | 786 mm |
| Outer diameter | 48 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 587 mm |
| Mounting points diameter | 28 mm. 31 mm |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£419.75
Important compatibility info
| Width | 290 mm |
| Length | 320 mm |
| Thickness | 150 mm |
| Type | Compressor, compressed-air system |
| Function | Compressor, compressed-air system |
| for OE number | 1080437 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£420.25
Important compatibility info
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£420.25
Important compatibility info
| Inner diameter | 26 mm |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Type | Hydraulic Pump, steering |
| Operating pressure to | 18.5 bar |
| Function | Hydraulic Pump, steering |
| Extra Description | febi Plus |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£420.25
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 116. 106. 58. 64 |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Type | Timing Chain Kit |
| for OE number | 059 109 229 J S2 |
| Timing Chain Size | G68HR, G68HP, G68HPF |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (39963)
- 1x Febi Timing Chain (39959)
- 1x Febi Timing Chain (39960)
- 1x Febi Timing Chain (39961)
- 1x Febi Chain Tensioner, oil pump drive (40270)
- 1x Febi Tensioner, timing chain (25416)
- 1x Febi Tensioner, timing chain (25415)
- 1x Febi Tensioner, timing chain (25411)
- 1x Febi Gasket, timing case cover (102845)
£420.88
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 196. 66 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49766)
- 1x Febi Guide, timing chain (109515)
- 1x Febi Guide, timing chain (109470)
- 2x Febi Timing Chain (49775)
- 1x Febi Tensioner, timing chain (109314)
- 1x Febi Tensioner, timing chain (109310)
- 1x Febi Tensioner, timing chain (109315)
- 1x Febi Sprocket, crankshaft (109516)
- 1x Febi Guide, timing chain (109518)
£421.60
Important compatibility info
| Length | 739 mm |
| Outer diameter | 48 mm |
| Number of Connectors / Ports | 2 |
| Stroke | 590 mm |
| Mounting points diameter | 28 mm. 45 mm |
| Function | Tilt Cylinder, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M12 x 1,5 |
| Type | Tilt Cylinder, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£421.79
Important compatibility info
| Material | Plastic |
| Outer diameter | 60 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 28.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£422.11
Important compatibility info
| Voltage | 12 V |
| Operating Mode | electromagnetic |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Connector Shape | Oval |
| Additional Information 2 | with bolts/screws |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£422.29
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023