Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Inner diameter 1 | 17.5 mm |
| Inner diameter 2 | 29 mm |
| Outer diameter 1 | 40 mm |
| Width 1 | 14 mm |
| Outer diameter 2 | 50 mm |
| Width 2 | 14 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (08392)
- 1x Febi Shaft Seal, wheel bearing (05004)
- 1x Febi Cap, wheel bearing (04992)
- 1x Febi Tab Washer, axle nut (04991)
- 1x Febi Split Pin (05005)
Important compatibility info
| Placement on Vehicle | Rear, Upper |
| Width | 40 mm. 59 mm |
| Material | Rubber/Metal |
| Outer diameter | 61 mm |
| Inner diameter | 12 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Thermoplast |
| Function | Bellow Kit, steering |
| Inner diameter 2 | 54 mm |
| Inner diameter 1 | 15 mm |
| Length | 206 mm |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fastening Clamp (06648)
- 1x Febi Fastening Clamp (06584)
- 1x Febi Bellow, steering (36518)
Important compatibility info
| Material | Thermoplast |
| Function | Bellow Kit, steering |
| Inner diameter 2 | 67 mm |
| Length | 247 mm |
| Type | Bellow Kit, steering |
| Inner diameter 1 | 14 mm |
| Additional Information | with grease |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38764)
- 1x Febi Fastening Clamp (06584)
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Bellow, steering (36516)
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Bellow Kit, steering |
| Inner diameter 2 | 55 mm |
| Inner diameter 1 | 15 mm |
| Material | Rubber |
| Length | 217 mm |
| Type | Bellow Kit, steering |
| Additional Information 2 | with clamps |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (12757)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
| Length | 144 mm |
| Paired article numbers | 22907 |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with counter nut |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Internal Thread Size | M12 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Type | Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 144 mm |
| Paired article numbers | 22909 |
| Internal Thread Size | M12 x 1,5 |
| External Thread Size | M10 x 1,25 |
| Function | Tie Rod End |
| Extra Description | ProKit |
| Type | Tie Rod End |
| Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 243 mm |
| Thickness | 62 mm |
| Spanner Size | 17 |
| Rod/Strut | Coupling Rod |
| DIN / ISO | 985 |
| Inner Length | 244 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M10 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 40 mm. 53 mm |
| Placement on Vehicle | Rear |
| Material | Rubber/Metal |
| Outer diameter | 70 mm |
| Inner diameter | 10 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Filter type | Filter Insert |
| Inner diameter | 90 mm |
| Outer diameter | 176 mm |
| Height | 130 mm |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber |
| Placement on Vehicle | Front Axle |
| Inner diameter 1 | 23 mm |
| Outer diameter | 59 mm |
| Length | 70 mm |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 150 mm |
| Material | NBR (nitrile butadiene rubber) |
| Placement on Vehicle | Right, Left |
| Thickness | 15 mm |
| Inner diameter | 120 mm |
| Function | Shaft Seal, wheel hub |
| Replaces | 19007 |
| Type | Shaft Seal, wheel hub |
| Colour | blue |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 580 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length from grip collar to min. marking | 562 mm |
| Length from grip collar to max. marking | 535 mm |
| Function | Oil Dipstick |
| Length | 614 mm |
| Extra Description | febi Plus |
| Colour | Yellow |
| Type | Oil Dipstick |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 230 mm |
| Width | 152 mm |
| Material | Metal |
| Thickness | 0.9 mm |
| Type | Gasket, cylinder head |
| Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Outer diameter | 69 mm |
| Thickness | 55 mm |
| Pressure | 13 bar |
| Type | Silencer, compressed-air system |
| Function | Silencer, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 53 mm |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
| for OE number | 52025626 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Aluminium |
| Function | Wheel Brake Cylinder |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Piston Diameter | 22 mm |
| Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 273 mm |
| Function | Air Filter |
| Height | 77 mm |
| Width | 124 mm |
| Additional Information 2 | with pre-filter |
| Filter type | Filter Insert |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 200 mm |
| Function | Filter, cabin air |
| Filter type | Pollen Filter |
| Height | 35 mm |
| Length | 216 mm |
| Type | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023



















