Workshop Tools

• Pin hole to enable securing of socket.
• Knurling area for better finger grip.
• Stamped sizes for quick and easy identification.
• Magnetic holding prevents wear down and enables secure hold.

General Information

Socket 46mm 1/2"D Socket 46mm 1/2"D.

• Manufactured from Chrome Molybdenum thin wall reduces the chance of damage to surrounding components
• Air impact quality - Single Hex (6pt)
• Total length 50mm / internal length 25mm
• Single sided rear swinging arm rear wheel and sprocket side nuts
• Equivalent to Triumph OEM T3880046Application: Datona 595 / 955 Speed Triple / Sprint ST 955 / 1050 / Tiger 885i / 955

• Gas cartridge sold separately
• For use with G2350 or 2175A Go System threaded gas cartridges
• Safety checked and test burned
• Ideal for general DIY, paint stripping, plumbing and intermediate soldering
• Stability base included
• Simple and safe to use
• Auto start Piezo ignition
• Rapid 1 minute warm up, use at any angle with precise flame control
• Stable powerful fine flame (up to 1400 C)

• Conforms to BS:EN521

• Comes complete with a handy storage case
• Range 0-99 psi / 0-7 bar
• Measures in PSI, bar, kpa, Kg/Cm2
• Tread depth gauge to measure tyre tread depth
• Unique 360 degree rotating nozzle and LED light to assist in locating tyre valve

• Dimensions (MM): H 141 x W 40 x D 29
• Weight (kg): 0.094
• Batteries: 2x CR2032 Included

• Sizes: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
• Keys feature long hex arm for access in hard to reach areas. Short hex arm for tight fit access and color coded hex key holder for convenient storage and identification.
• Rugged black phosphate finish for long life and added strength

• Comfort grip l-handles for secure grip & more torque, ball end on long arm for better angle of entry in hard to reach areas & stubby hex shank on side handle for tight fit access

• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.
• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.

General Information

Cable End Shroud with Grip Collar - 35mm. Cable End Shroud with Grip Collar - 35mm

• 35mm diameter x 130mm length
• Also available: 15mm x 100mm length and 25mm x 110mm length
• Flexible gripping collar prevents damage to the cable insulation
• Push on shrouds for un-insulated cable ends - 1000v insulated
• Will also fit over cable connectors and lugs

General Information

Clamp for Strut Insert Pistons - 60mm Bolts Clamp for Strut Insert Pistons - 60mm Bolts.

• Very useful when working with struts that are equipped with strong internal springs (tension stop springs) that pull the strut shaft partly into the strut
• Clamp for Strut insert pistons with 60mm bolts
• Kit includes 60mm long bolts (68mm including head)
• Locks the Mcpherson strut in its fully extended position

• 12v car cigarette lighter plug
• Built-in air pressure gauge and storage compartment
• High speed inflation of tyres and other inflatable objects
• Built in work light and flashing hazard light
• 260 PSI air compressor
• Oblong style 3 in 1 product

• CE, ROHS, REACH, GS TUV Compliant

General Information

Crows Foot Oil Filter Wrench 27mm - for Ford

• Made in Sheffield
• OEM 303-1579
• Bi Hex x 1/2in. drive
• S Max, Mondeo, Galaxy, Euro 6 compliant engines from 2010 onwards
• Application: Oil filters on Ford Durotorq TDCI (DW12C) diesel engines

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Pack 1 pce
• 0.5 kilogram weight
• Composition : 28% Tin, 72% Lead
• Tinman Solder Stick

• NCCJ500-W - Wheel Replacement
• NCCJ500-S - Saddle Replacement
• NCCJ500-P - Hydraulic Pump Replacement
• NCCJ500-FP - Foot Pedal Replacement

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• RoHS compliant
• For tracking ignition problems
• Pack of 4
• Designed for testing the output on HT leads

• Essential tool
• Selected steel
• Twin head

General Information

Deep Socket - Air Impact 1/2"D 36mm Deep Socket - Air Impact 1/2"D 36mm.

• 1/2in. drive
• 36mm drive depth, 56mm internal depth, 51mm external Diameter
• Manufactured from Chrome Vanadium
• For use with air impact tools

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Polishing sponge soft. Extremely soft sponge with fine foam structure. For fine polishing with polishing creams / wax compounds to remove very fine scratches and holograms (swirls)

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Sizes: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm
• Keys feature long hex arm for access in hard to reach areas. Short hex arm for tight fit access and color coded hex key holder for convenient storage and identification.
• Rugged black phosphate finish for long life and added strength

• Comfort grip l-handles for secure grip & more torque, long arm for better angle of entry in hard to reach areas & stubby hex shank on side handle for tight fit access

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Nickel chrome plated for long lasting protection.
• Extra long beam offers extreme reach and loads of leverage.
• 6-point box ends snugly fix hex-shaped fastener heads and resist slipping off while you work

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Replacement knuckle joints available (not covered by Lifetime warranty)
• Chrome Vanadium body and Chrome Molybdenum head for extra strength
• Get the extra leverage you need to break loose frozen and stuck nuts and bolts.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Custom engineered steel - Milwaukee custom metal formula makes the SHOCKWAVE bits more resistant to shock from impacting.
• SHOCK ZONE reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
• SHOCK ZONE Geometry - designed to flex:
• Laser hardened WEAR GUARD TIP for improved wear resistance and protection of the fit over the life of the bit.
• Designed for use with impact drivers the SHOCKWAVE IMPACT DUTY accessory line is not only ideal for heavy duty impact applications, but also delivers a full system solution for all the user's drilling and fastening needs.