Workshop Tools

• Features a non-slip ratchet end and non-slip open end
• Corrosion Resistant
• Polished Chrome
• 90 Tooth Count
• 6 Point

• The 90 tooth count gear allows 4 degree arc swing

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 1.6 mm thick blade resists bending reduces vibration and blate flattering at speed.
• Teeth are hardened and triple sharpened for a super sharp splinter free clean cut.
• 3x faster aggressive triple sharpened tooth geometry for speed and splinter free cuts.

• Can be combined with replacement socket storage rails.
• Features a durable and light-weight design.
• Replacement rail socket clips.

• Socket Holder Rail Replacement Clip 1/2in.

• Sizes: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm & 10 mm
• Short hex arm for tight fit access and color coded hex key holder for convenient storage and identification
• Keys feature long hex arm for access in hard to reach areas

• Magnetic ball on long arm allows better angle of entry for hard to reach areas plus fastener control, set also features short hex arm for tight fit access & color coded hex key holder for convenient storage & identification

• Locking
• Easy Release
• Heat treated CR-MO jaws and handle material for added strength and durability
• Comfort non-slip grip handle provides less fatigue

• 5in. Long

• Teardrop slim ratchet type
• 6 Deg. / 60 Teeth Swing Arc Ratchet
• Polished Chrome

• Qty: 25
• 90 Degree Angle Profile
• Metric Thread

• Standard size
• 305mm long
• Pack of 2
• HSS blades

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Supplied in blister pack
• Valve allows trigger-adjustable airflow
• Ergonomically designed handle, for comfort in use

• Maximum Supply Pressure 10 bar / 140 psi
• Connection 1/4 Female
• Air Flow 270 l/min / 9.3 cfm
• Temperature Range 0 to 80 °C
• Grip Style Pistol
• Conical Nozzle Style
• Outlet pressure on blowguns should not exceed 2bar / 28lbf/in²
• It is therefore recommended that an in-line regulator is fitted to your air supply to ensure this.

• Lacquer finish for exceptional rust prevention
• Hardened jaws and cutting edges
• Comfort grip handle
• Chrome-moly
• Professional grade

• Long panel wrenches provide additional reach and leverage on stubborn fasteners and feature an aggressive non-slip design.
• Each wrench is constructed from chrome vanadium high alloy steel and is produced using a precision hot forging process with extra emphasis on special heat treatment to provide maximum strength and durability.
• Wrenches are technician's first choice for getting the job done and come backed by unwavering commitment to detail and uncompromising quality from top to bottom of each product. Long panel wrenches feature an aggressive non-slip design.
• Mirror polish chrome-plated finish resists rust while 12-point, 15 Degree offset box ends provide precise fastener control. Non-slip jaw designs allows for higher torque and turning power in tough applications. Includes storage rack.

• Carlyle Metric 12 Point Long Non-Slip Combination Wrench - 17 mm

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT™ sides.
• FOUR FLAT™ sides on socket deter rolling.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• AWS A5.20 E71T-GS
• Flux cored mild steel welding wire for welding low and medium tensile steels without the use of gas

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Ideal For Multiple Uses Indoors & Out
• Dries the surface in half the time
• Fast removal of water in one easy pass
• Will not scratch
• Moulds to almost any contour
• Soft silicone flexible blade
• Whisks away surplus water
• T shaped blade

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT™ sides.
• FOUR FLAT™ sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Black
• Design helps protect fingers
• Rubber
• Flexible for a smooth contoured finish
• Grips most sheets of wet and dry sanding material

• Locking
• Easy Release
• Heat treated CR-MO jaws and handle material for added strength and durability
• Comfort non-slip grip handle provides less fatigue

• 6in. Long

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• 152mm
• Constructed from Chrome-Moly material
• Comfort non-slip grip

• Angled

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Crosshatch jaw design provides extraordinary gripping force with minimal hand pressure
• Lacquer finish for exceptional rust prevention
• Hardened jaws & cutting edges for strength & durability
• Constructed from Chrome-Moly material
• Comfort non-slip grip

• Crosshatch jaw design provides extraordinary gripping force with minimal hand pressure.
• Hardened jaws and cutting edges for strength and durability, lacquer finish for exceptional rust prevention.
• Professional grade pliers are constructed from chrome-moly material and feature comfort grip handles.

• Pliers Combination Slip Joint Pliers 8in.

• High quality hot-forging process provides a performance
• Premium chrome finish to protect against corrosion
• High visibility colour filled size mark for easy identification during use
• Premium Chrome Finish
• 15 degree offset box end
• Anti-Slip and radius corners on open end

• ASME Compliant

• Suitable for the bars with an end on the handle
• Manufactured from CR-MO steel for strength
• Breaker / Power bar head replacement

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Qty: 25
• 90 Degree Angle Profile
• Metric Thread

• Lacquer finish for exceptional rust prevention
• Hardened jaws and cutting edges
• Comfort grip handle
• Chrome-moly
• Professional grade

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Part of PACKOUT™ Shop Storage.
• Constructed with impact resistant polymers.
• Fits in PACKOUT™ Organiser (4932464082) & PACKOUT™ Compact Organiser (4932464083).
• Hangs on PACKOUT™ Wall Mounting Plates.
• Stores screws, tapes and other small items.

• Resistant to oil, grease and most similar contaminants
• Max working pressure 200PSI
• Fitted with the standard 1/4in. BSP female swivel nuts
• Recoils when slack to help keep work areas tidy
• Coiled high strength, flexible UPVC hose

• Dual hole design and groove for security accessories.
• Ball detent design for superior impact socket retention.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Complies with BS EN12645:2014
• Includes integral pocket clip and removable protective cap

• Accuracy: +/- 2 psi
• Calibration: 6-50 psi / 0.5-3.4 bar
• Reading Accuracy: 1 psi / 0.1 bar

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening