Workshop Tools

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

General Information

Hub Nut Socket 34mm 1/2"D 6pt - Renault. Hub Nut Socket 34mm 1/2"D 6pt - Renault

• Chrome Molybdenum
• Deep impact socket
• This impact socket comes in a 6pt (Single-Hex) format and 78mm long

• Specifically introduced for service and maintenance on Renault hub nuts

• Gas cartridge sold separately
• For use with G2400 Go System propane gas cylinder
• Fitted with CGA600 connection
• Safety checked and test burned
• Ideal for plumbing, brazing and automotive
• Instantly FLARESAFE; use at any angle
• Solid brass construction
• A durable high power, high temperature (up to 1480 C) fine flame gas torch

• Conforms to BS:EN521

The Maypole Single Barrel Foot Pump is just one of the options from their range of portable foot pumps. It has superior performance up to 100psi, comes with an analogue readout which measures in both PSI and BAR and all the connectors and adapters that you will need to inflate not only your tyres but also a wide range of other inflatables including sports equipment, balls and toys. The pump is quick and easy to use, is compact for easy storage and comes with an ergonomic rubberised tread plate.

Maypole are the UK's leading manufacturer of high quality towing, trailer and related leisure products. Based in Birmingham with over 40 years of experience, they are a trusted and well-known brand for their products. With over 2000 lines currently, Maypole is using their knowledge and expertise in making new and innovative products and solutions which are helping their customers. From electrical cabling, to electrical winches, and even ice scrappers, Maypole has tried to cater for the Travel and leisure markets in the UK.

• Non slip footplate
• Locks down for easy storage
• Locking valve connector
• Supplied with 3 additional nozzle adaptors
• TUV/GS approved
• Heavy duty single footpump

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all tools.
• Hook coating protects hooks and stored items.
• High strength steel hooks for storing even heavy tools and items.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Integrated wire cutter that can cut up to 1/4in. bolt
• Nickel-plated finish for corrosion resistance
• Durable forged CR-V jaws with induction hardened teeth for ulitimate durability
• Complies with ASME specs B107.24
• Pull-up release allows for one-handed opening when locked
• Tested to exceed 2,500 lbs. jaw pressure
• Hard rubber grip on handle helps prevent hand slippage

• Universal Joint provides easier access in hard to reach spaces to get every job done, both in the garage and on the jobsite.
• Ball detent securely holds the socket to the adapter.
• Chrome finish for optimal resistance to corrosion and rust.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

General Information

Wiper Arm Removal Tool Wiper Arm Removal Tool.

• Screw thread and hook feet
• Sized for difficult access
• Time saver
• Suitable for spline taper and taper spigots

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Supplied in a wallet
• Reset button
• Solid construction
• Dial type tyre tread gauge

• SG2 A18 ER70S-6
• Mild steel welding wire for welding low and medium tensile steels

• Qty: 50
• 45 Degree Angle Profile
• Metric Thread

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Chrome finish.
• Stamped sizes for easy visibility.
• Wrench ready FOUR FLAT sides.
• Flour flat sides on socket deter rolling.

• Part of PACKOUT™ Shop Storage.
• Fully customise your shop according to your needs.
• Most secure and easy mounting with click & lock mechanism.
• Easy and fast access to all tools.
• Hook coating protects hooks and stored items.
• High strength steel hooks for storing even heavy tools and items.

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Nickel chrome plated for long lasting protection.
• Extra long beam offers extreme reach and loads of leverage.
• 6-point box ends snugly fix hex-shaped fastener heads and resist slipping off while you work

• 15° offset box for better accessibility.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.

• SHOCK ZONE reduces stress at the tip resulting in less tip breakages. The combination of the SHOCK ZONE design and special heat treatment absorbs impacts and allows the bit to flex with spring like action.
• SHOCK ZONE Geometry designed to flex:
• Designed for use with impact drivers the SHOCKWAVE IMPACT DUTY accessory line is not only ideal for heavy duty impact applications but also delivers a full system solution for all the user's drilling and fastening needs.
• Custom engineered steel Milwaukee custom metal formula makes the SHOCKWAVE bits more resistant to shock from impacting.
• Laser hardened WEAR GUARD TIP for improved wear resistance and protection of the fit over the life of the bit.

• Radius corner on working end provides better gripping of fastener
• Chamfered drive opening smooths connection between socket and drive tool
• Made from Chrome Molybdenum Alloy Steel for strength and durability
• Black phosphate finish resists corrosion
• For use with impact power / air tools
• Radius Corner Design
• Chamfered Drive Opening

• AWS A5.20 E71T-GS
• Flux cored mild steel welding wire for welding low and medium tensile steels without the use of gas

• CR-V alloy steel for long lasting durability.
• Worldwide patent.
• Meet DIN torque spec.
• Processing without tolerance to true present the 90 teeth 4 degrees of operation function.
• Nickel chrome plated for long lasting protection.
• Extra long beam offers extreme reach and loads of leverage.
• 6-point box ends snugly fix hex-shaped fastener heads and resist slipping off while you work