Proud to be a UK-based company
Contact us
Important compatibility info
| Belt Pulley Diameter | 55 mm |
| Function | Alternator |
| Type | Alternator |
| Voltage | 12 V |
| Pulleys | with belt pulley |
| Weight | 5.92 kg |
| Number of Ribs | 6 |
| Alternator Charge Current | 110 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.16
Important compatibility info
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Number of Wings | 9 |
| Material | Grey Cast Iron |
| Number of Teeth | 24 |
| Weight | 9.6 kg |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.16
Important compatibility info
| Extra Description | febi Plus |
| Function | Parts Set, maintenance service |
| Weight | 6.278 kg |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Urea Filter (101852)
- 1x Febi Air Dryer Cartridge, compressed-air system (178819)
- 1x Febi Air Filter (49350)
- 1x Febi Filter, cabin air (17420)
- 1x Febi Fuel filter (176029)
- 1x Febi Oil Filter (35334)
- 1x Febi Screw Plug, oil sump (48401)
- 1x Febi Hydraulic Filter, steering (15761)
£156.16
Important compatibility info
| Function | Cylinder Head Cover |
| Weight | 3.237 kg |
| Height | 147 mm |
| Width | 329 mm |
| Length | 697 mm |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.16
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 195 |
| Weight | 2.019 kg |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Belts | with rounded tooth profile |
| Units / Pulleys | incl. tensioner pulley, incl. guide pulleys |
| for OE number | 0816.K2 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (101047)
- 1x Febi Tensioner Pulley, timing belt (29301)
- 2x Febi Deflection Pulley/Guide Pulley, timing belt (100349)
£156.12
Important compatibility info
| Number of Connectors / Ports | 2 |
| Thickness | 147 mm |
| Function | Interior Blower |
| Outer diameter | 149.5 mm |
| Weight | 1.8 kg |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.12
Important compatibility info
| Weight | 3.478 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 153 mm |
| Thickness | 111 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Inner diameter | 38 mm |
| Width | 85 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.07
Important compatibility info
| Height | 631 mm |
| Outer diameter | 355 mm |
| Inner diameter | 139 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Weight | 4.200 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£156.07
Important compatibility info
| Length | 610 mm |
| Weight | 13.920 kg |
| Pipe Diameter | 50 mm |
| Placement on Vehicle | Rear Axle |
| Hole Pitch 1/ Hole Pitch 2 | 152/152 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | febi Plus |
| Steering arm type | Trailing Arm |
| Bore Diameter | 21 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.96
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 772 mm |
| Min. Length | 453 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Weight | 6.9 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.91
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 680 mm |
| Min. Length | 392 mm |
| Pipe Diameter | 50 mm. 60 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Weight | 5.6 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.91
Important compatibility info
| Shock Absorber Design | Telescopic Shock Absorber |
| Mounting points diameter | 16 mm |
| Function | Shock Absorber |
| Pipe Diameter | 51 mm. 63 mm |
| Min. Length | 360 mm |
| Max. Length | 462 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 2.8 kg |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Rear Axle |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.91
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| Weight | 0.041 kg |
| Number of Connectors / Ports | 5 |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.87
Important compatibility info
| Height | 146 mm |
| Outer diameter | 108 mm |
| Inner diameter | 88 mm |
| Number of Connectors / Ports | 3 |
| Function | Water Separator, fuel system |
| Weight | 0.27 kg |
| Type | Water Separator, fuel system |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.77
Important compatibility info
| Placement on Vehicle | Lower, Front, Front Axle Right, Front Axle Left |
| Material | Rubber/Metal |
| Outer diameter | 79.5 mm |
| Thickness | 80 mm |
| Additional Information 2 | with mounting sleeve |
| Inner diameter | 14.2 mm |
| Paired article numbers | 182262 |
| Weight | 0.604 kg |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
| for OE number | 213 333 09 00 |
| Caster correction | +3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.55
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Function | Timing Chain Kit |
| Number of Chain Links | 110 |
| Weight | 0.849 kg |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (186500)
- 1x Febi Tensioner, timing chain (186176)
- 1x Febi Guide, timing chain (186178)
- 1x Febi Guide, timing chain (186179)
£155.54
Important compatibility info
| Weight | 1.84 kg |
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 188 |
| Timing Chain Size | G68VCO |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25167)
- 1x Febi Guide, timing chain (47399)
- 1x Febi Tensioner, timing chain (01583)
- 1x Febi Seal Ring (05552)
- 1x Febi Guide, timing chain (44623)
- 1x Febi Guide, timing chain (47387)
£155.42
Important compatibility info
| Number of Connectors / Ports | 9 |
| Combi Switch Function | Transmission Mode (automatic/manual) |
| Weight | 0.265 kg |
| Type | Steering Column Switch / Switch, cruise control / Switch, engine brake |
| Function | Steering Column Switch / Switch, cruise control / Switch, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.39
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.051 kg |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.29
Important compatibility info
| Weight | 1.0 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 186753 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.26
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023