Important compatibility info
Weight | 0.16 kg |
Number of Connectors / Ports | 2 |
Function | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Type | Control Valve, camshaft adjustment |
Placement on Vehicle | Intake Side, Exhaust Side |
Valve type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 175412 |
External Thread Size | M14 x 1,5 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 3.284 kg |
Cone Size | 17.9 mm |
Steering arm type | Control Arm, Four-Point Link (CV) |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Upper |
Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.85 kg |
Type | Brake Lining, drum brake |
Width | 200 mm |
Placement on Vehicle | Rear Axle, Front Axle |
Function | Brake Lining, drum brake |
Number of pads | 8 |
Inner Brake Drum Diameter | 410 mm |
Number of Holes | 14 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1385 mm. 40 mm |
Outer diameter | 14.61 mm |
Number of Connectors / Ports | 2 |
Cable Length | 1293 mm |
Function | Sensor, crankshaft pulse |
Weight | 0.105 kg |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.300 kg |
Additional Information | with bush |
Type | Release Fork, clutch |
Function | Release Fork, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 280 mm |
Thickness | 56.3 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 68 mm |
Surface | Coated |
Function | Brake Disc |
Weight | 5.765 kg |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Cone Size 2 | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Placement on Vehicle | Front Axle Left, Lower, outer |
Material | Sheet Steel |
Weight | 3.688 kg |
Steering arm type | Control Arm |
Paired article numbers | 185602 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Material | Rubber/Metal |
Paired article numbers | 18509 |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 1.26 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Weight | 0.68 kg |
Type | Belt Tensioner, v-ribbed belt |
Replaces | 21094 |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 55190509 |
Number of Connectors / Ports | 2 |
Function | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Type | Control Valve, camshaft adjustment |
Weight | 0.19 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Control Valve, camshaft adjustment |
Weight | 0.154 kg |
Type | Control Valve, camshaft adjustment |
Placement on Vehicle | Upper |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Weight | 3.688 kg |
External Thread Size | M12 x 1,25 |
Cone Size 2 | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right, Lower, outer |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 185603 |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 23 |
Weight | 5.702 kg |
External Teeth, Diff.Side | 23 |
Min. Length | 727 mm |
Wheel Sided Joint Diameter | 84 mm |
Transmission-side joint diameter | 78.6 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Bore Diameter | 35 mm. 21 mm |
Weight | 5.000 kg |
Type | Link/Coupling Rod, stabiliser bar |
Diameter | 1 mm |
Length | 365 mm |
Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.250 kg |
Placement on Vehicle | Lower Front Axle, Right |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 22787 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holder |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 186 mm |
Height | 71 mm |
Width | 110 mm |
Function | Oil Cooler, engine oil |
Weight | 0.670 kg |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Function | Sensor, crankshaft pulse |
Number of Connectors / Ports | 3 |
Length | 580 mm |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with seal ring |
Cable Length | 552 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing Type | Angular Ball Bearing |
Inner diameter | 30.6 mm |
Weight | 3.365 kg |
Placement on Vehicle | Front Axle |
Width | 48 mm |
Outer diameter | 88 mm |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 48 mm |
Outer diameter | 85 mm |
Thickness | 84 mm |
Inner diameter | 29 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 112 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Weight | 3.08 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information | with fastening/mounting material |
Outer diameter 1 | 65 mm |
Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 9.22 kg |
Placement on Vehicle | Front Axle, Rear Axle |
Length | 210.5 mm |
Width | 92.3 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Brake Type | Disc Brake |
Thickness/Strength 1 | 30 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023