Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 5 of 43
Results 81 - 100 of 854
Part number: HRA3L02
Important compatibility info
| Title | Workshop Pro Hose Reel, Air Hose, 15m of 10mm i/d Hose |
Additional Information
Specifically designed for use with compressed air in garages, workshops and industrial applications, PCL’s hose reel range comes in three sizes, with different hose lengths and diameters to suit user needs. Each features a hose stop that stops in any position and is adjustable at the flick of a lever. All except the two bench top hose reels are slow retract, taking up to 9 seconds. Easy to maintain, cleaning brushes are now included as standard to avoid debris being taken back into the reel, which can cause the layering system to fail.
- Slow Retract up to 9 seconds
- Steel wall mounting 180° swivel bracket
- Copper tail coupling with dust cap
- in.High impact polypropylene construction for maximum durability in.
- Supplied with cleaning brushes
- Auto retract - Easily and smoothly rewinds the hose
- Easy to use adjustable hose stopper - Reduces non value added time
- Hose Length: 15 m
- Hose I.D: 10 mm
- Inlet & Outlet Size: 1/4in. BSPT
- Hose Type: PVC
- Working pressure: 250 psi / 17 bar
ONLY
£132.32
£132.32
Part number: HC1206
Important compatibility info
| Title | Hose Tail 7.9mm (5/16) i/d Hose to Male Thread R 1/4 |
Additional Information
This corrosive-resistant, plated Hose Tail Adaptor connects the hose to a female fitting.
- Connects the hose to a female fitting
- Corrosive-resistant
- Hose Internal Diameter: 7.9mm (5/16 in)
- Male Thread: R 1/4
ONLY
£4.37
£4.37
Part number: HA2116
Important compatibility info
| Title | Anti Whip Hose 0.6m of 13mm i/d Hose, 100 Series Adaptor & R 1/2 Male End Fitting |
Additional Information
PCL’s whip hoses are highly recommended by the Health & Safety Executive’s Guide HS(G) 39 as they are designed to distance an air tool from its air supply to prevent vibration. This enables tools to be used safely and helps to prolong the life of couplings and adaptors.
- Simply “Plug-in and goin.
- Improves ease of handling - reduces operator fatigue
- Helps to prolong the life of couplings and adaptors
- Working pressure @ 20°C: 21 bar / 300 psi
- Burst pressure: 63 bar / 900 psi (3:1 safety factor)
- Temperature range: -10°C to 60°C
- Please note - an increase in temperature above 20°C will affect the working pressure quoted above
ONLY
£18.16
£18.16
Part number: ACKIT01
Important compatibility info
Additional Information
The Emergency Coupling Kit is designed for the service engineer or to keep in a workshop in case of a pneumatic airline failure. This small, compact Emergency Coupling Kit contains all the parts you would need to repair any standard airline failure and have it up and running in minutes.
- Kit contains; x1 AC91CM, x2 ACA2746, x1 HC5656, x1 HC6560, x1 AC91CF, x1 HC6892, x1 HC1217, x1 HC6895, x2 ACA2593, x1 HC6893, x1 HC2479, x1 HC6896, x1 PTFE Tape, x2 OO Jubilee Clip, x2 OOO Jubilee Clip
- Solid compact pocket case with item numbers and descriptions on the inside to aid with replenishments
- Ideal to keep in a van or workshop
- Jubilee® Clips and PTFE tape to convert or repair an airline connection
- Includes genuine PCL couplings, adaptors, hosetails and hose connectors
ONLY
£51.44
£51.44
Part number: 83405
Important compatibility info
| Title | R Clips - 5mm - Pack of 10 |
Additional Information
- Bulk packed x 10 in poly bag
- R Clips 5mm diameter
- Length 110mm
ONLY
£5.16
£5.16
Part number: 83404
Important compatibility info
| Title | R Clips - 4mm - Pack of 10 |
Additional Information
- Bulk packed x 10 in poly bag
- R Clips 4mm diameter
- Length 75mm
ONLY
£5.11
£5.11
Part number: PPMS
Important compatibility info
| Title | Assorted M/S Hose Clips - Box of 32 |
Additional Information
- Covers recommended adjustment ranges from 9.5mm to 40mm
- Contains 32 assorted Jubilee Clips
- Convenient small pack
- Conform to British Standard BS5315
- Pack dimensions H 39mm x L 180mm x W 150mm
ONLY
£33.43
£33.43
Part number: OK175MS
Important compatibility info
| Title | O Clip Kit M/S - Pack of 175 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. Jubilee 'O' Clips are two ear clamps widely used for maintenance and OEM applications. Mainly used on air, fluid, gas and steam lines, they are also suitable for low pressure hydraulic applications. Ideal for where the requirement is for a neat finish with no bulky housing to catch on obstructions. Pincers are used to crimp the ears of the clamps and affect a proper seal. A 'O' clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc plated
- 175 'O' clips in a re-usable plastic container
ONLY
£65.96
£65.96
Part number: NB1820
Important compatibility info
| Title | Junior Clips M/S 18-20mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£28.51
£28.51
Part number: NB1618
Important compatibility info
| Title | Junior Clips M/S 16-18mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£23.29
£23.29
Part number: NB1416
Important compatibility info
| Title | Junior Clips M/S 14-16mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£23.09
£23.09
Part number: NB1315
Important compatibility info
| Title | Junior Clips M/S 13-15mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£25.11
£25.11
Part number: NB1214
Important compatibility info
| Title | Junior Clips M/S 12-14mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£24.85
£24.85
Part number: NB1113
Important compatibility info
| Title | Junior Clips M/S 11-13mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£24.85
£24.85
Part number: NB0911
Important compatibility info
| Title | Junior Clips M/S 9-11mm - Pack of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£22.29
£22.29
Part number: NB0810
Important compatibility info
| Title | Junior Clips M/S 8-10mm - Pack of 50 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£24.54
£24.54
Part number: NB0709
Important compatibility info
| Title | Junior Clips M/S 7-9mm - Pack of 50 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Recommended tightening torque - 1.5Nm, maximum tightening torque 2Nm
- 7mm A/F screw fastening
- Used in applications such as securing fuel lines and heater hoses
- Ideal for small bore hoses with relatively low pressures, where little clamping force is required
- Mini clips, also known as nut & bolt clips
ONLY
£22.01
£22.01
Part number: MB1708
Important compatibility info
| Title | 11mm Multiband Banding Handy Pack M/S - 10 Metre |
Additional Information
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- 3.4Nm recommended tightening torque
- 0.82 band thickness
- Wide range of uses such as heating, ventilation and air conditioning (HVAC), sign fixing, agricultural and emergency industrial repair applications
- Complete with 25 standard housings and screws
- 10 metres of 11mm width continuously threaded rolled band which can be cut to length
- Self assembly system
- Quick, versatile and convenient banding that can be cut to a desired length
ONLY
£57.63
£57.63
Part number: MB1707
Important compatibility info
| Title | 11mm Multiband Pocket Pack - Mild Steel |
Additional Information
- 7mm width band, 0.82mm band thickness, recommended torque 3.4Nm, 7mm A/F hexagonal head screw
- Features: Self assembly, endless banding or screw band system, cut band to desired length
- Pack contains 3m of 11mm width Mild Steel Zinc protected banding and 8 x Mild Steel Zinc protected solid housings and screws
- Suitable for sign fixings, heating ventilation and air conditioning (HVAC) fastening applications
- Convenient small sized pack, quick to use and versatile
ONLY
£29.57
£29.57
Part number: M00MS
Important compatibility info
| Title | Hose Clips M/S M00 11-16mm - Box of 10 |
Additional Information
Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.
In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Jubilee will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Jubilee clips are the industry standard. The Zinc plated Jubilee clips which are also known as hose clamps or hose clips are manufactured in the UK with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time. In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.
- Mild steel zinc protected
- Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
- The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
- The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
- The original worm drive hose clip
ONLY
£10.83
£10.83
Page 5 of 43
Hose & Pipe
