Hose & Pipe

• BSP Thread
• Stepped Tail piece
• For use with Connect Fastflow Airline Couplings & compatible with other popular airline couplings
• Integral adaptor

• For use with Connect Fastflow Airline Couplings
• Compatible with other popular airline couplings

• Euro Universal Female Adaptor
• British Standard Pipe (BSP) Thread
• Zinc Clear Finish
• Compatible with other popular air line fittings

• Euro Universal Female Adaptor
• British Standard Pipe (BSP) Thread
• Zinc Clear Finish
• Compatible with other popular air line fittings

• Constructed of plastic that will connect two hoses
• Straight Push-Fit

This fuel hose from Pearl Automotive is 1 metre in length and has an internal diameter of 5.5mm. It is made from NBR /PVC with a polyester outer suitable for leaded, unleaded and diesel fuels.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Supplied with two clips with an outer braided covering
• Made from NBR /PVC with polyester outer suitable for leaded/unleaded and diesel engine non injection

• Fuel hose 5.5mm inside diameter 1m

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 1a hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Hose clips made from a band of metal passing through a worm drive
• Normally used for clamping hose from approximately 1/2in. upwards
• Made from non-corrosive stainless steel
• Pack of 10

• Black
• Nylon
• Pack of 100

• 9.0mm Cable diameter

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 1 hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from electricals and exhausts to workshop consumables.

• Hose clips made from a band of metal passing through a worm drive
• Normally used for clamping hose from approximately 1/2in. upwards
• Made from non-corrosive stainless steel
• Pack of 10

This length of heater hose from Pearl Automotive is 3/8 inch hose. It comes in a 1m length made from MBR.CR rubber which is suitable for use with vehicle heater systems.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Suitable for automotive heating systems with a temperature range of -40 Deg C to + 110 Deg C
• Black EPDM Resistant to Weather Ozone

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 1X. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Hose clips made from a band of metal passing through a worm drive
• Normally used for clamping hose from approximately 1/2in. upwards
• Made from non-corrosive stainless steel
• Pack of 10

• Airline connector
• Parallel thread
• Pack of 5

• BSP Thread
• Stepped Tail piece
• For use with Connect Fastflow Airline Couplings & compatible with other popular airline couplings
• Integral adaptor

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• The original worm drive hose clip
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• Mild steel zinc protected

This servo/air brake hose from Pearl Automotive is 3/8inch with an inside diameter of 1m. It has a working pressure bar of 10 and a burst pressure bar of 62.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Servo air hose 3/8in. 10mm
• Inside diameter x 1m
• Working pressure bar of 10 and a burst pressure bar of 62
• Includes clips

• Euro Universal Male Adaptor
• Zinc Clear Finish
• Compatible with other popular air line fittings

• Aluminium air duct hose
• Flexible hose makes for easier routing
• Heat resistant from -40 to +250 degrees celsius

The applications for the versatile Jubilee clips extended in various situations from home usage in plumbing, to holding and securing road sings. The highly durable zinc plating protects the stainless steel clip for confidence in using the clips. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous and this why Jubilee is chosen time after time.

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• Single nut adjustment
• Smooth band protects hose
• Bridge piece ensures 360 deg seal
• Solid trunion maximises torque
• Assembly by manual or automatic tools
• Chromium VI free finish on all materials
• Mild steel zinc plated

As part of their automotive spares and accessories range Pearl supply a range of replacement/spare hose clips suitable for automotive use. These stainless steel hose clips come as a pack of 10 size 2A hose clips. Each clip comes with a worm screw to seal the clip tightly into place.

Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Hose clips made from a band of metal passing through a worm drive
• Normally used for clamping hose from approximately 1/2in. upwards
• Made from non-corrosive stainless steel
• Pack of 10

In 1921, Jubilee invented the worm drive hose clip and they have been manufacturing them ever since. From the original patents to the current BS requirements, the company has led the world with consistent high quality. The comprehensive range of products enables users everywhere to be confident that Jubilee has a clip to suit their application. These days, Jubilee is not the only manufacturer of hose clip and clamping materials, but they are still the finest, setting the standard to which all competitors aspire.

• The original worm drive hose clip
• The band is continuously threaded to enable extra flexibility when adjusting the clip to the correct size
• The smooth inside profile of the band and rolled edges give protection for all types of hoses including soft hoses made from rubber or silicone
• Independently tested by the British Standards Institute (BSi) and carry the British Standard Kitemark™ BS 5315:1991
• Mild steel zinc protected

Pearl has established a reputation over the years for delivering high quality products. With recent expansions into a more diverse product portfolio of automotive products, its established Wot Nots' brand is still thriving. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.

• Hose clip that is made from a band of metal passing through a worm drive, normally used for clamping hose from approximately 1/2in. upwards
• Made from mild steel zinc plated
• Pack of 10