Proud to be a UK-based company
Contact usHose & Pipe
invoice Page 2 of 39
Results 31 - 60 of 1161
Part number: ACA1793
Important compatibility info
| Title | Standard Adaptor 6.35mm (1/4) i/d Hose Tailpiece |
Additional Information
The PCL Standard Air Line Adaptor is suitable for most compressed air applications. Designed and manufactured alongside PCL couplings, this range of Standard Adaptors has become the benchmark in the UK for quality and reliability. Designed for use with Airflow and Vertex Couplings.
- Used in most workshop/garage environments
- Wide choice of thread and hose tail sizes
- Used with Airflow, Vertex and Safeflow Safety Couplings
- Thread size: 6.35mm (1/4)
- Thread type: Hose Tailpiece
- Nominal Bore (mm): 4.8
- Flow Rate: 43 cfm @ 100 psi
- Maximum Working Pressure: 14 bar / 200 psi
ONLY
£4.89
£4.89
Part number: PWN531
Important compatibility info
| Title | Hose Connector - Y Piece Push-Fit - 8mm |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This hose connector from Wot-Nots comes in a single pack. It is a 'Y' piece connector with a size of 8mm. Ideal as a spare or replacement pack for joining and connecting pipes and tubing. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Constructed of plastic
- Connects three hoses
- Waterproof
ONLY
£4.89
£4.89
Part number: PWN255
Important compatibility info
| Title | Hose Clips M/S O 16-22mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£4.90
£4.90
Part number: PWN253
Important compatibility info
| Title | Hose Clips M/S OOO 8-12mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£4.92
£4.92
Part number: PWN254
Important compatibility info
| Title | Hose Clips M/S OO 13-20mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£4.92
£4.92
Part number: PWN256
Important compatibility info
| Title | Hose Clips M/S OX 18-25mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£5.01
£5.01
Part number: BHC2005S
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 59 mm |
| Diameter From | 66 mm |
| Quantity | 1 |
| Type | Fastening Clamp, charge air hose |
ONLY
£5.05
£5.05
Part number: PWN524
Important compatibility info
| Title | Hose Connector - Straight Push-Fit - 6mm - Pack Of 2 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of their repairs and replacements range Wot-Nots have designed a range of hoses for a wide range of applications. This Wot-Nots Hose Connector comes in a pack of 2. The connector is a straight type and is 6mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Constructed of plastic
- Connects two hoses
- Waterproof
ONLY
£5.06
£5.06
Part number: EMH325
Important compatibility info
| Function | Hose, crankcase ventilation |
| Inner diameter 1 | 18 mm |
| Material | NBR (nitrile butadiene rubber) |
| Hose Length | 126 mm |
| Colour | Black |
| Inner diameter 2 | 18 mm |
| Type | Hose, crankcase ventilation |
ONLY
£5.09
£5.09
Part number: 102470
Important compatibility info
| Length | 40.5 mm |
| Inner diameter | 14 mm |
| Inner diameter 1 | 10 mm |
| Function | Hose, transmission oil cooler |
| Transmission Type | for automatic transmission |
| Weight | 0.003 kg |
| Type | Hose, transmission oil cooler |
ONLY
£5.14
£5.14
Part number: AXC00162
Important compatibility info
| Title | Worm Drive Hose Clips 12 - 20 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 12 - 20 mm - Pack of 10
- Quality product
- Bright zinc plated for extra protection
- Convenient pack size
- Perforated band design
- Reliable and strong
- Quality product made from Bright Zinc Plated mild steel
ONLY
£5.15
£5.15
Part number: EMH655
Important compatibility info
| Colour | Black |
| Inner diameter 1 | 8 mm |
| Material | NBR (nitrile butadiene rubber) |
| Function | Hose, crankcase ventilation |
| Hose Length | 80 mm |
| Type | Hose, crankcase ventilation |
| Inner diameter 2 | 8 mm |
ONLY
£5.18
£5.18
Part number: PWN1188
Important compatibility info
| Title | Diesel Spill Off Pipe |
Additional Information
20 x Diesel Spill Off Pipe Plugs
- Use with Diesel Spill Off Pipes
- For Diesel Vehicles
- Plugs Open Ends of Pipes
- PWN1188
ONLY
£5.18
£5.18
Part number: FHC2009S
Important compatibility info
| Function | Fastening Clamp, charge air hose |
| Diameter To | 51 mm |
| Diameter From | 56 mm |
| Quantity | 1 |
| Type | Fastening Clamp, charge air hose |
ONLY
£5.26
£5.26
Part number: PWN259
Important compatibility info
| Title | Hose Clips M/S 1X 27-40mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£5.31
£5.31
Part number: PWN586
Important compatibility info
| Title | Hose Clips S/S OOO 8-12mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Hose clip that is made from a band of metal passing through a worm drive
- Normally used for clamping hose from approximately 1/2in. upwards
- Made from non corrosive stainless steel
ONLY
£5.32
£5.32
Part number: PWN258
Important compatibility info
| Title | Hose Clips M/S 1 25-35mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£5.33
£5.33
Part number: PWN1100
Important compatibility info
| Title | Hose Clip - 10 to 16mm MOO - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The zinc plated hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- 12mm Wide Band
- MOO Size
- Zinc Plated
ONLY
£5.34
£5.34
Part number: PWN532
Important compatibility info
| Title | Hose Connector - Y Piece Push-Fit - 10mm |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Wot-Nots provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This hose connector from Wot-Nots comes in a single pack. It is a 'Y' piece connector with a size of 10mm. Ideal as a spare or replacement pack for joining and connecting pipes and tubing. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Constructed of plastic
- Connects three hoses
- Waterproof
ONLY
£5.34
£5.34
Part number: EMH538
Important compatibility info
| Inner diameter 2 | 20 mm |
| Inner diameter 1 | 28.5 mm |
| Hose Length | 355 mm |
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Type | Hose, crankcase ventilation |
| Function | Hose, crankcase ventilation |
ONLY
£5.37
£5.37
Part number: PWN261
Important compatibility info
| Title | Hose Clips M/S 2 40-55mm - Single Pack |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£5.37
£5.37
Part number: PWN594
Important compatibility info
| Title | Hose Clips S/S 2 40-60mm - Single Pack |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Hose clip that is made from a band of metal passing through a worm drive
- Normally used for clamping hose from approximately 1/2in. upwards
- Made from non corrosive stainless steel
ONLY
£5.37
£5.37
Part number: AXC00165
Important compatibility info
| Title | Worm Drive Hose Clips 20 - 32 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 20 - 32 mm - Pack of 10
- Quality product
- Bright zinc plated for extra protection
- Convenient pack size
- Perforated band design
- Reliable and strong
- Quality product made from Bright Zinc Plated mild steel
ONLY
£5.41
£5.41
Part number: EMH615
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter 1 | 13 mm |
| Colour | Black |
| Inner diameter 2 | 13 mm |
| Type | Hose, crankcase ventilation |
| Hose Length | 145 mm |
| Function | Hose, crankcase ventilation |
ONLY
£5.42
£5.42
Part number: PWN589
Important compatibility info
| Title | Hose Clips S/S OX 16-25mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Hose clip that is made from a band of metal passing through a worm drive
- Normally used for clamping hose from approximately 1/2in. upwards
- Made from non corrosive stainless steel
ONLY
£5.45
£5.45
Part number: AXC00166
Important compatibility info
| Title | Worm Drive Hose Clips 23 - 35 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 23 - 35 mm - Pack of 10
- Quality product
- Bright zinc plated for extra protection
- Convenient pack size
- Perforated band design
- Reliable and strong
- Quality product made from Bright Zinc Plated mild steel
ONLY
£5.46
£5.46
Part number: EMH394
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Colour | Black |
| Function | Hose, crankcase ventilation |
| Type | Hose, crankcase ventilation |
ONLY
£5.46
£5.46
Part number: MFL1107
Important compatibility info
| Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Type | Fuel Hose |
| Function | Fuel Hose |
| Colour | Black |
| Placement on Vehicle | Fuel Tank |
ONLY
£5.46
£5.46
Part number: PWN257
Important compatibility info
| Title | Hose Clips M/S 1A 22-30mm - Pack of 2 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. Whether you want to secure high pressure pipes, or use the clips for a wealth of other uses within a car, Wot-Nots clips are have the solution. The Mild Steel hose clips which are also known as hose clamps are manufactured with rigorous quality control procedures to ensure the clips are produced to the highest standards possible. The applications for the versatile clips extended in various situations from home usage in plumbing, to holding and securing road sings. A hose clip might not be the most expensive part of an installation, but if it fails the results could be disastrous. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Standard worm drive hose clip
- Size denotes the open and close span
ONLY
£5.47
£5.47
Part number: AXC00167
Important compatibility info
| Title | Worm Drive Hose Clips 25 - 40 mm - Pack of 10 |
Additional Information
Worm Drive Hose Clips 25 - 40 mm - Pack of 10
- Quality product
- Bright zinc plated for extra protection
- Convenient pack size
- Perforated band design
- Reliable and strong
- Quality product made from Bright Zinc Plated mild steel
ONLY
£5.51
£5.51
Page 2 of 39
Hose & Pipe
