Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178064 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 51 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.73
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Lower, Front |
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 182032 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.73
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 622 mm |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.73
Important compatibility info
| Width | 25.4 mm |
| Number of Teeth | 116 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.74
Important compatibility info
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 22 |
| Seal Diameter | 51 mm |
| External Teeth, Wheel Side | 25 |
| Outer diameter | 80 mm |
| Length | 141 mm |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Function | Joint Kit, drive shaft |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.74
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178175 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 51 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.74
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178174 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 51 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.74
Important compatibility info
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 80 mm |
| Outer diameter | 142 mm |
| Thickness | 69 mm |
| Inner diameter | 32 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.74
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Material | Thermoplast, PU (Polyurethane) |
| Length | 210 mm |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (175629)
- 2x Febi Rubber Buffer, suspension (175659)
£32.75
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Number of Connectors / Ports | 3 |
| Brake Type | Disc Brake |
| Cable Length | 3630 mm |
| Type | Warning Contact, brake pad wear |
| Function | Warning Contact, brake pad wear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.75
Important compatibility info
| Function | Rubber Buffer, suspension |
| Material | PU (Polyurethane) |
| Placement on Vehicle | Rear Axle |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.76
Important compatibility info
| Height | 43 mm |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.76
Important compatibility info
| for OE number | 03C 103 464 A |
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.77
Important compatibility info
| Extra Description | febi Plus |
| Function | Hand Feed Pump |
| Material | PA (polyamide) |
| Type | Hand Feed Pump |
| Spanner Size | 32 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.77
Important compatibility info
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Inner diameter | 12.3 mm |
| Additional Information 2 | without ball bearing |
| Material | Rubber/Metal |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.78
Important compatibility info
| Additional Information | without coolant level sensor |
| Material | PP (Polypropylene) |
| Colour | White |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | 13 04 223 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.79
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 151.7 mm |
| Width | 61.1 mm |
| Wear Warning Contact | with acoustic wear warning |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 15.8 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.79
Important compatibility info
| Outer diameter | 59 mm |
| Length | 355 mm |
| Wire Diameter | 12.3 mm |
| Placement on Vehicle | Rear Axle |
| Type | Suspension Spring |
| Function | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.79
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Function | Brake Disc |
| Placement on Vehicle | Front Axle |
| Outer diameter | 256 mm |
| Thickness | 38.8 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 65 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.80
Important compatibility info
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | without oil drain plug |
| for OE number | 030 103 601 E SK |
| Wet Sump Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.80
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023