Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Weight | 0.08 kg |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 1.49 kg |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179491 |
| Weight | 1.462 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Charge Air Cooler, Left |
| Height | 145 mm |
| Width | 290 mm |
| Additional Information 2 | with clamps |
| Inner diameter 1 | 49 mm |
| Inner diameter 2 | 66 mm |
| Weight | 1.368 kg |
| Type | Charge Air Hose |
| Hose Length | 690 mm |
| Function | Charge Air Hose |
| Turbocharger line | Piping to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Function | Repair Kit, kingpin |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Length | 126 mm |
| Outer diameter | 54 mm. 50 mm |
| Weight | 2.028 kg |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Lock Ring, steering knuckle (05880)
- 1x Febi Circlip (06065)
- 1x Febi Seal Ring, steering knuckle (26286)
- 2x Febi Bush, steering knuckle (15858)
- 1x Febi Kingpin (26289)
£58.20
Important compatibility info
| Weight | 1.724 kg |
| Internal Thread Size | M12 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 145 mm. 45 mm |
| Thickness | 67 mm |
| Number of Holes | 6 |
| Number of Teeth | 30 |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Parameter | 5PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 155 mm |
| Inner diameter | 18 mm |
| Weight | 1.595 kg |
| Additional Information 2 | with screw |
| Number of Ribs | 4 |
| Width | 22 mm |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26367)
- 1x Febi Centering Bolt, crankshaft pulley (33529)
£58.20
Important compatibility info
| Weight | 0.092 kg |
| Opening Temperature | 82 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Length | 59 mm |
| Spanner Size | 27 |
| Number of Connectors / Ports | 3 |
| Function | Sensor, oil pressure |
| Screw length below head | 12 mm |
| Weight | 0.112 kg |
| External Thread Size | M18 x 1,5 |
| Colour | Black |
| Type | Sensor, oil pressure |
| for OE number | 51.27421.0262 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Pipe Diameter | 41 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 12 mm |
| Mounting points diameter | 14 mm |
| Min. Length | 221 mm |
| Max. Length | 336 mm |
| Weight | 1.7 kg |
| Operating Mode | Mechanical |
| Placement on Vehicle | Front |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| DIN / ISO | 12098, 1185, 3731 |
| Number of Connectors / Ports | 15. 7 |
| Version | OE Standard |
| Function | Adaptor, electric filament |
| Port / Connector type | 15 to 2x7 |
| Assignment plan scheme number | 4 |
| Type | Adaptor, electric filament |
| Weight | 0.552 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179489 |
| Weight | 1.462 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 44 mm |
| Outer diameter | 80.9 mm |
| Inner diameter | 27.6 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Wheel Bearing Kit |
| Weight | 2.73 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Bearing Type | Rolling Bearing |
| Outer diameter 1 | 64.1 mm |
| Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.09 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 800 mm |
| Outer diameter | 15 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 4.035 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 174228 |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Additional Information | with adjuster |
| Weight | 0.40 kg |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.303 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 58 |
| Timing Chain Size | G53RING |
| Type | Chain Kit, oil pump drive |
| Function | Chain Kit, oil pump drive |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (31115)
- 1x Febi Chain Tensioner, oil pump drive (183599)
- 1x Febi Rail, oil pump drive chain (183865)
- 1x Febi Rail, oil pump drive chain (183597)
£58.20
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 28369 |
| Placement on Vehicle | Front Axle Left, Upper |
| Weight | 1.245 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.52 kg |
| Outer diameter | 44 mm |
| Length | 180 mm |
| Type | Slave Cylinder, engine brake |
| Function | Slave Cylinder, engine brake |
| External Thread Size | M8 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 380 mm |
| Thickness | 85 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Weight | 2.8 kg |
| Additional Information 2 | without rubber mount(s) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.41 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 40 |
| Extra Description | Basic Short Kit |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 0849.23 |
| Timing Chain Size | G67HR, G67HP |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner, timing chain (37211)
- 1x Febi Guide, timing chain (37224)
- 1x Febi Timing Chain (33691)
£58.20
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Paired article numbers | 192945 |
| Number of Connectors / Ports | 7 |
| Weight | 0.76 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Replaces | 19123 |
| Paired article numbers | 19120 |
| Additional Information | with holder, with rubber mounts |
| Weight | 4.100 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | without ball joint |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 4.51 kg |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle Left |
| Material | Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 173552 |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Paired article numbers | 12909 |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.500 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut, with holder |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Additional Information | with lock nut |
| Weight | 3.295 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 39645 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information 2 | with screw, with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39627)
- 1x Febi Nut, ball joint (21884)
- 1x Febi Screw (39229)
£58.20
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Paired article numbers | 192944 |
| Number of Connectors / Ports | 7 |
| Weight | 0.76 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 3.841 kg |
| Paired article numbers | 34223 |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23798)
£58.20
Important compatibility info
| Length | 215 mm |
| Height | 24 mm |
| Width | 105 mm |
| Number of mounting bores | 6 |
| Mounting points diameter | 9.2 mm |
| Function | Thermostat Housing |
| Additional Information | with gasket/seal |
| Weight | 0.415 kg |
| Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat Housing (104963)
- 1x Febi Gasket, thermostat housing (107781)
£58.20
Important compatibility info
| Width of castor bearing surface | 38 mm |
| Operating Mode | Automatic |
| Weight | 1.350 kg |
| Outer diameter | 70 mm |
| Width | 100 mm |
| Material | Metal |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 5.2 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 760 mm |
| Min. Length | 474 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Weight | 1.7 kg |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Operating Mode | Automatic |
| Outer diameter | 75 mm |
| Weight | 1.201 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Weight | 1.5 kg |
| Paired article numbers | 175794 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Front and Rear, both sides |
| Weight | 0.43 kg |
| Type | Air Suspension Valve |
| Function | Air Suspension Valve |
| Replaces | 15496 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Suspension Valve (23563)
- 1x Febi Mounting Set, driver cab suspension valve (29313)
£58.20
Important compatibility info
| Housing length | 203 mm |
| Function | Gas Spring, bonnet |
| Type | Gas Spring, bonnet |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 130 mm |
| Eject Force | 295 N |
| Housing Diameter | 18 mm |
| Weight | 0.2 kg |
| Additional Information | Change interval/date according to gas spring imprint |
| Length | 364 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 258 mm |
| Min. Length | 203 mm |
| Pipe Diameter | 49 mm. 60 mm |
| Mounting points diameter | 30 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 2.0 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Rear, both sides |
| External Thread Size | M16 x 1,5 |
| Type | Mounting, engine |
| Weight | 3.770 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.510 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 398 mm |
| Max. Length | 398 mm |
| Min. Length | 276 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.690 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 501 mm |
| Max. Length | 501 mm |
| Min. Length | 315 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.102 kg |
| Type | Mounting, engine |
| Replaces | 17962 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Placement on Vehicle | Left |
| Number of Connectors / Ports | 2 |
| Weight | 0.121 kg |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Weight | 2.85 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 53 mm |
| Outer diameter | 74 mm |
| Inner diameter | 30 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Weight | 1.690 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Weight | 0.081 kg |
| Type | Sensor, exhaust gas temperature |
| Cable Length | 970 mm |
| Number of Connectors / Ports | 2 |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.22
Important compatibility info
| Weight | 13.78 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 370 mm |
| Thickness | 73 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.24
Important compatibility info
| Weight | 6.08 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 35.9 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.25
Important compatibility info
| Weight | 0.67 kg |
| Belts | with rounded tooth profile |
| Width | 20 mm |
| Number of Teeth | 163 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47885)
- 1x Febi Tensioner Pulley, timing belt (45795)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (45793)
- 1x Febi Bolt, tensioner pulley (184719)
£58.25
Important compatibility info
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24x1,5 |
| Wheel Sided Joint Diameter | 79 mm |
| Min. Length | 944 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Diff.Side | 26 |
| Weight | 7.564 kg |
| Transmission-side joint diameter | 81.5 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.28
Important compatibility info
| Operating Mode | Electronic |
| Number of Connectors / Ports | 2 |
| Weight | 0.0685 kg |
| Type | Injector Nozzle |
| Function | Injector Nozzle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.28
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023