Important compatibility info
Weight | 0.885 kg |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.04 kg |
Outer diameter | 60 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Function | Belt Tensioner, v-ribbed belt |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Thread Size | M27x1,5 |
Bolt Hole Circle Diameter | 94 mm |
Bore Diameter | 10.5 mm |
External Teeth, Wheel Side | 30 |
Weight | 7.630 kg |
Number of mounting bores | 6 |
Min. Length | 651 mm |
Wheel Sided Joint Diameter | 94 mm |
Transmission-side joint diameter | 108 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Hydraulic |
Weight | 0.27 kg |
Placement on Vehicle | Upper Right |
Paired article numbers | 12510 |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.270 kg |
Width of castor bearing surface | 30 mm |
Outer diameter | 65 mm |
Operating Mode | Mechanical |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 32 mm |
Extra Description | febi Plus |
Function | Belt Tensioner, V-ribbed belt |
Type | Belt Tensioner, V-ribbed belt |
Weight | 2.516 kg |
Operating Mode | Automatic |
Outer diameter | 70 mm |
Material | Metal |
Width | 76 mm |
Replaces | 170320 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.717 kg |
Function | Cylinder Head Gasket Set, air compressor |
Type | Cylinder Head Gasket Set, air compressor |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Front Axle Left |
Additional Information | with rubber-metal mounts |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 179987 |
Weight | 4.55 kg |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.265 kg |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Length | 863 mm |
Width | 42 mm |
Thickness | 42 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Placement on Vehicle | Front Axle |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Bottom eye, Top pin |
Max. Length | 384 mm |
Min. Length | 272 mm |
Pipe Diameter | 34 mm |
Piston conrod diameter | 20 mm |
Function | Shock Absorber, driver cab suspension |
Weight | 2.13 kg |
External Thread Size | M12 x 1,75 |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.6 kg |
Cone Size | 32 mm |
Rod/Strut | Push Rod |
Adjustable | Adjustable on both sides |
Pipe Diameter | 38 mm |
Function | Centre Rod Assembly |
Length | 860 mm. 750 mm |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Mounting points diameter | 50 mm. 14 mm |
Piston conrod diameter | 13 mm |
Min. Length | 286 mm |
Pipe Diameter | 48 mm |
Operating Mode | Mechanical |
Placement on Vehicle | Front |
Max. Length | 346 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Weight | 1.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Driver side |
Length | 982 mm |
Outer diameter | 48 mm |
Rod/Strut | Push Rod |
Weight | 7.900 kg |
Colour | red/brown |
Cone Size | 30 mm |
Function | Centre Rod Assembly |
Pipe Diameter | 48 mm |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Replaces | 14485 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Material | Cast Aluminium |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Weight | 0.866 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Placement on Vehicle | Front Axle |
Length | 776 mm. 726 mm |
Rod/Strut | Push Rod |
Weight | 6.6 kg |
Cone Size | 28.6 mm |
Pipe Diameter | 42 mm |
Function | Centre Rod Assembly |
Additional Information | with nuts |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.3 kg |
Placement on Vehicle | Front Axle |
Length | 380 mm |
Thickness | 55.43 mm |
Rod/Strut | Coupling Rod |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Transmission-side joint diameter | 77 mm |
Paired article numbers | 183590 |
External Teeth, Wheel Side | 23 |
Weight | 5.242 kg |
External Teeth, Diff.Side | 26 |
Min. Length | 624 mm |
Wheel Sided Joint Diameter | 79 mm |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
Type | Drive Shaft |
Function | Drive Shaft |
Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bearing, with ball joint |
Steering arm type | Control Arm |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 41067 |
Weight | 5.0 kg |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.303 kg |
Function | Gasket Set, automatic transmission |
Extra Description | febi Plus |
Type | Gasket Set, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.43 kg |
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 420 mm |
Min. Length | 315 mm |
Pipe Diameter | 82 mm. 44 mm |
Mounting points diameter | 20 mm. 32 mm |
Piston conrod diameter | 13 mm |
Function | Shock Absorber, driver cab suspension |
External Thread Size | M6 x 1 |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M30 x 1,5 RHT |
Weight | 9.005 kg |
Placement on Vehicle | Front Axle |
Length | 966 mm |
Outer diameter | 50 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Function | Centre Rod Assembly |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
External Thread Size | M24 x 1,5 |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Operating Mode | Automatic |
Width of castor bearing surface | 40 mm |
Weight | 1.902 kg |
for OE number | 906 200 43 70 |
Outer diameter | 75 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M10 x 1 |
Placement on Vehicle | Rear |
Weight | 2.9 kg |
Pressure | 400 bar |
Type | Door Lock, driver cab |
Function | Door Lock, driver cab |
Additional Information 2 | without switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 550 mm |
Width | 250 mm |
Material | Metal |
Thickness | 1.4 mm |
Function | Gasket, cylinder head |
Weight | 0.421 kg |
Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.600 kg |
Width | 20 mm |
Outer diameter | 490 mm |
Inner diameter | 440 mm |
Number of Teeth | 161 |
Type | Ring Gear, flywheel |
Function | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.848 kg |
Chain Type | Simplex, with chain lock |
Number of Chain Links | 96 |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
Extra Description | Basic Short Kit |
Timing Chain Size | G68HP, G68HR |
Replaces | 30323 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25444)
- 1x Febi Guide, timing chain (30257)
- 1x Febi Guide, timing chain (30258)
- 1x Febi Tensioner, timing chain (25408)
Important compatibility info
Weight | 0.84 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 144 |
Function | Timing Chain Kit |
Timing Chain Size | G53HR |
for OE number | 11 31 8 618 317 S3 |
Type | Timing Chain Kit |
Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (28719)
- 1x Febi Guide, timing chain (30448)
- 1x Febi Guide, timing chain (30453)
- 1x Febi Guide, timing chain (30446)
- 1x Febi Tensioner, timing chain (47638)
Important compatibility info
Weight | 1.96 kg |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Inner diameter | 25 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Outer diameter | 133 mm |
Additional Information | with fastening/mounting material |
Width | 74 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Bearing Type | Angular Ball Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 31286 |
Placement on Vehicle | Front Axle Left |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 4.70 kg |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M10x1,5 |
Additional Information 2 | with screw |
Weight | 7.506 kg |
External Teeth, Diff.Side | 26 |
Min. Length | 943 mm |
Wheel Sided Joint Diameter | 82 mm |
External Teeth, Wheel Side | 36 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 82 mm |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023