Important compatibility info
Function | Cylinder Head, air compressor |
Weight | 2.2 kg |
Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Weight | 9.46 kg |
Material | Grey Cast Iron |
Function | Water Pump, engine cooling |
Number of Wings | 12 |
Water pump impeller material | Grey Cast Iron |
Replaces | 12848 |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M27x1,5 |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Wheel Side | 30 |
Weight | 8.542 kg |
External Teeth, Diff.Side | 27 |
Min. Length | 971 mm |
Wheel Sided Joint Diameter | 86.2 mm |
Transmission-side joint diameter | 81.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 2.32 kg |
Length | 433 mm |
Spanner Size | 19 |
Type | Oil sump |
Function | Oil sump |
Extra Description | febi Plus |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Push Rod |
Length | 620 mm |
Outer diameter | 40 mm |
Weight | 7.3 kg |
Cone Size | 30.2 mm |
Thread Type | with left-hand thread, with right-hand thread |
Placement on Vehicle | from 1st idler arm to the 2nd idler arm |
Pipe Diameter | 38 mm |
Function | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.282 kg |
Voltage | 19 V |
Spanner Size | 36 |
Function | Glow Plug |
Glow Plug Type | Flame Glow Plug |
Type | Glow Plug |
External Thread Size | M32 x 1,5 |
Length | 102 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 1679 mm |
Extra Description | ProKit |
Function | Tie Rod |
Type | Tie Rod |
Pipe Diameter | 52 mm |
Cone Size | 30 mm |
Weight | 16.5 kg |
External Thread Size | M24 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.05 kg |
Placement on Vehicle | Lower Front Axle, Rear |
Material | Cast Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.282 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 26656 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material, with holder |
Additional Information 2 | with bearing, with ball joint |
Additionally Required Parts | 31 10 6 772 199, 31 10 6 757 145, 7 12 9 906 196 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (26641)
- 1x Febi Mounting, control/trailing arm (18687)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (104977)
Important compatibility info
Function | Mounting, engine |
Type | Mounting, engine |
Number of Connectors / Ports | 1 |
for OE number | 4G0 199 381 NF |
Weight | 1.565 kg |
Bearing/Mounting Type | electrically adjustable hydro mount |
Additional Information
Technical Information
Not replaceable by 4G0 199 381 NG (febi 180461 / SWAG 33 10 7686).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023