Mountings & Bushes Mountings & Bushes
Fits SKODA FABIA I (6Y2) 1.4 16V
(1999)

Part number: AKM1010
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Suspension: for vehicles with standard suspension; Suspension: for vehicles with bad road version
Placement on Vehicle Front Axle
Function Suspension Strut Support Mount
Type Suspension Strut Support Mount
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Apec AKM1010 Top Strut Mounting
ONLY
£19.09
Quantity:
Part number: AKM1046
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle Left; Fitting Position: Front Axle Right
Bearing Type Rolling Bearing
Outer diameter 112 mm
Type Suspension Strut Support Mount
Function Suspension Strut Support Mount
Inner diameter 67 mm
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Apec AKM1046 Top Strut Mounting
ONLY
£13.88
Quantity:
Part number: AKM1048
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Suspension: for vehicles with standard suspension; Suspension: for vehicles with bad road version
Type Suspension Strut Support Mount
Placement on Vehicle Rear Axle
Function Suspension Strut Support Mount
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Apec AKM1048 Top Strut Mounting
ONLY
£13.15
Quantity:
Part number: AKM1124
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Suspension: for vehicles with sports suspension; Suspension: for vehicles with bad road version
Bearing Type Rolling Bearing
Type Suspension Strut Support Mount
Placement on Vehicle Front Axle
Function Suspension Strut Support Mount
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Apec AKM1124 Top Strut Mounting
ONLY
£9.71
Quantity:
Part number: AKM1189
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Vehicle Identification Number (VIN) from: _6Y_2_345001; Vehicle Identification Number (VIN) from: _6Y_2X022802; Engine Code: AUA; Engine Code: BBY; Engine Code: BKY
Manufacturer SEAT SKODA VOLKSWAGEN
Type Suspension Strut Support Mount
Model CORDOBA FABIA FOX IBIZA POLO ROOMSTER
Function Suspension Strut Support Mount
Placement on Vehicle Front Axle
Additional Information 2 with bolts/screws
for OE number 6Q0412331BS2
Apec AKM1189 Top Strut Mounting
ONLY
£21.98
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Suspension: for vehicles without heavy duty suspension; Suspension: for vehicles without lifted suspension
Length 53 mm
Diameter 63 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Material PA (polyamide)
Placement on Vehicle Rear, Front Axle Left, Front Axle Right
Paired article numbers AST8006
Apec AST8006 Wishbone / Control / Trailing Arm Bush
ONLY
£7.91
Quantity:
Outer diameter 72 mm
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Placement on Vehicle Rear Axle Left, Rear Axle Right
Function Bushing, axle beam
Type Bushing, axle beam
Material PU (Polyurethane)
Paired article numbers AST8079
Apec AST8079 Wishbone / Control / Trailing Arm Bush
ONLY
£11.73
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Specification: Axle set
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Diameter 18 mm
Manufacturer SEAT SKODA VOLKSWAGEN
Placement on Vehicle Front Axle Left, Front Axle Right
Paired article numbers AST8081
Apec AST8081 Wishbone / Control / Trailing Arm Bush
ONLY
£5.58
Quantity:
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Diameter 12 mm. 33 mm
Length 54 mm
Model CORDOBA FABIA FOX IBIZA POLO ROOMSTER
Placement on Vehicle Front Axle Left, Front Axle Right
Manufacturer SEAT SKODA VOLKSWAGEN
Paired article numbers AST8136
Apec AST8136 Wishbone / Control / Trailing Arm Bush
ONLY
£6.10
Quantity:
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Function Bushing, axle beam
Type Bushing, axle beam
Bearing/Mounting Type Hydro Mount
Outer diameter 69 mm
Placement on Vehicle Rear Axle Left, Rear Axle Right
Height 89 mm
Inner diameter 12 mm
Paired article numbers AST8172
Apec AST8172 Wishbone / Control / Trailing Arm Bush
ONLY
£12.93
Quantity:
Placement on Vehicle Rear Axle
Type Suspension Strut Support Mount
Function Suspension Strut Support Mount
Material Aluminium
Additional Information 2 without ball bearing
Inner diameter 11 mm
BGA SM0103 Suspension Strut Support Mount
ONLY
£12.81
Quantity:
Placement on Vehicle Front Axle Left, Front Axle Right
Outer diameter 111 mm
Inner diameter 68 mm
Bearing Type Roller Bearing
Type Rolling Bearing, suspension strut support mount
Function Rolling Bearing, suspension strut support mount
BGA SM9602 Strut Anti Friction Bearing
ONLY
£12.81
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right
Material PA (polyamide)
Outer diameter 72 mm
Function Mounting, control/trailing arm
Placement on Vehicle Rear Axle, Left, Right
Type Mounting, control/trailing arm
Paired article numbers FSK6066
Borg & Beck BSK6066 Wishbone / Control / Trailing Arm Bush
ONLY
£12.27
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right
Inner diameter 12.1 mm
Diameter 33 mm
Length 54 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6367
Borg & Beck BSK6367 Wishbone / Control / Trailing Arm Bush
ONLY
£6.25
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Rear; Suspension: for vehicles without heavy duty suspension
Diameter 63 mm
Length 53 mm
Material Rubber/Metal
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6368
Borg & Beck BSK6368 Wishbone / Control / Trailing Arm Bush
ONLY
£7.91
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Rear; Suspension: for vehicles with heavy duty suspension
Diameter 63 mm
Length 51 mm
Function Mounting, control/trailing arm
Material Rubber/Metal
Type Mounting, control/trailing arm
Paired article numbers FSK6368HD
Borg & Beck BSK6368HD Wishbone / Control / Trailing Arm Bush
ONLY
£8.88
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right; Replace in pairs only
Bearing/Mounting Type Hydro Mount
Placement on Vehicle Rear Axle, Left, Right
Outer diameter 69 mm
Function Mounting, control/trailing arm
Inner diameter 12 mm
Length 89 mm
Type Mounting, control/trailing arm
Paired article numbers FSK6828
Borg & Beck BSK6828 Wishbone / Control / Trailing Arm Bush
ONLY
£12.97
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Function Repair Kit, stabiliser coupling rod
Placement on Vehicle Front Axle
Inner diameter 19 mm
Type Repair Kit, stabiliser coupling rod
Borg & Beck BSK7006K 2x Anti Roll Bar Bush (pair)
ONLY
£8.95
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Inner diameter 17 mm
Function Repair Kit, stabiliser coupling rod
Type Repair Kit, stabiliser coupling rod
Borg & Beck BSK7138K 2x Anti Roll Bar Bush (pair)
ONLY
£6.95
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Inner diameter 18 mm
Function Repair Kit, stabiliser coupling rod
Type Repair Kit, stabiliser coupling rod
Borg & Beck BSK7139K 2x Anti Roll Bar Bush (pair)
ONLY
£5.69
Quantity:

Page 1 of 6
Mountings & Bushes

What are mountings and bushes?

Mountings and bushes are components used to attach parts securely in your vehicle. Mountings and bushes are designed to keep their associated parts in place and in many cases provide shock absorption and articulation. There are many locations in a vehicle where mountings and bushes are used, especially where metal parts join together and require a rubber separation to prevent metal-on-metal damage.


How do I choose the correct mounting and bushes?

Finding the correct mounting and bushes is best done by cross referencing the original part number (OE). Although some of these parts look similar there can be subtle differences which may lead to them either not fitting correctly or failing prematurely. If you are not able to obtain and cross reference the OE part number here are some things to consider when looking for correct replacements:

  • Number of gears (i.e. 5 speed or 6 speed, manual, automatic etc)

  • Factory modifications (sports pack, levelling suspension, specific shape etc)

  • Transmission type / transmission code

  • Vehicle manufacture date (this is not the date the vehicle was registered but the date it was made)

  • Engine number sequence (up to or after as specific number/letter

  • VIN (chassis number) sequence (up to or after as specific number/letter

  • Standard, hydraulic or electric mounting

  • Diameter or other significant measure


What brand of mountings and bushes should I choose?

There are a number of brands available in the aftermarket. Some brands such as Bosch manufacture mountings and bushes for the original car brands however there are other high quality brands that meet or exceed the original specifications. Brands such as Blue Print, Delphi, Borg & Beck and Febi offer long warranties to take the worry out of choosing a quality part.


How can I tell my mountings or bushes needs replacing?

Often a visual check will show if the mounting or bushes need to be replaced. We always recommend you speak to a qualified mechanic if you are not sure. Some of the symptoms of a faulty mounting or bushes are:

  • There is a knocking noise when turning or going over bumps

  • The rubber has become split/damaged on the mounting or bush

  • There is loose play around the mounting or bush

  • There is fluid leaking from the mounting (hydraulic)

  • The mounting is corroded


Your feedback more
Trusted reviews more
Secure payments more
Simple returns more