Proud to be a UK-based company
Contact usNuts & Washers
invoice Page 1 of 4
Results 1 - 30 of 107
Part number: PWN095
Important compatibility info
| Title | Spire Clips - 3/32in. x 1/8in. - Pack Of 6 Pairs |
Additional Information
From time to times mall parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This Wot-Nots pack of 12 Spire Clips are used behind a flat piece of pre drilled metal which enables to fix another item to it , using a number 10 self-tapping screw. These fasteners are zinc plated. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- This fastener is used behind a flat piece of pre drilled metal which enables to fix another item to it , using a number 10 self tapping screw
- Zinc plated
- Pack of 6
ONLY
£3.62
£3.62
Part number: PWN081
Important compatibility info
| Title | Self Locking Nuts - 1/4in. UNF Pack Of 4 |
Additional Information
From time to times mall parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of this range Wot-Nots have developed a set of Self Locking nuts. The 4 piece pack comes with a 1/4in. inside diameter with a nylon insert to ensure it does not shake loose. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Amount as listed in product description:4
- Image for illustration purposes only
- Designed to be used only once in a pack of 4
- Nuts self locking with a 1/4in. inside diameter with a nylon insert to ensure it does not shake loose
ONLY
£3.70
£3.70
Part number: PWN059
Important compatibility info
| Title | Steel Washer - Flat - 1/4in. - Pack Of 20 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This pack of 20 Steel Flat Washers from Wot-Nots are commonly used to stop nuts rubbing against the component your bolting up or used as a spacer. The 20 piece Steel Zinc plated washers come in 1/4”. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Steel construction
- Flat washer
ONLY
£3.76
£3.76
Part number: PWN061
Important compatibility info
| Title | Steel Washer - Flat - 3/8in. - Pack Of 15 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This pack of 30 Steel Flat Washers from Wot-Nots are commonly used to stop nuts rubbing against the component your bolting up or used as a spacer. The 20 piece Steel Zinc plated washers come in 3/8”. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Steel construction
- Flat washer
ONLY
£3.76
£3.76
Part number: PWN541
Important compatibility info
| Title | Steel Washer - Flat - 5mm & 6mm - Pack Of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This pack of 10 Steel Flat Washers from Wot-Nots are commonly used to stop nuts rubbing against the component your bolting up or used as a spacer. The 20 piece Steel Zinc plated washers come in 5mm and 6mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Flat washers constructed of steel
- Two sizes 5 & 6 mm
- Assorted
ONLY
£3.76
£3.76
Part number: PWN542
Important compatibility info
| Title | Steel Washer - Flat - 8mm & 10mm - Pack Of 10 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This pack of 10 Steel Flat Washers from Wot-Nots are commonly used to stop nuts rubbing against the component your bolting up or used as a spacer. The 20 piece Steel Zinc plated washers come in 8mm and 10mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Flat washers constructed of steel
- Sizes: 8mm & 10mm
- Pack of 10
ONLY
£3.76
£3.76
Part number: PWN094
Important compatibility info
| Title | Spire Clips - No. 10 - Pack Of 4 |
Additional Information
From time to times mall parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This Wot-Nots pack of 3 Spire Clips are used behind a flat piece of pre drilled metal which enables to fix another item to it , using a number 10 self-tapping screw. These fasteners are zinc plated. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Zinc plated
- Pack of 4
- This fastener is used behind a flat piece of pre drilled metal which enables to fix another item to it , using a number 10 self tapping screw
ONLY
£3.80
£3.80
Part number: PWN585
Important compatibility info
| Title | Repair Washers - 1/4in., 5/16in. & 3/8in. - Pack Of 3 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This pack of 3 Steel Repair Washers from Wot-Nots are commonly used to stop nuts rubbing against the component your bolting up or used as a spacer. The 3 piece Steel washers come in assorted sizes. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Assorted
- These washers have an outside diameter from 1 1/4in. to 1 1/2in.
- Repair washers have a larger outside diameter than a normal washer
ONLY
£3.80
£3.80
Part number: PWN091
Important compatibility info
| Title | Manifold Nuts - 10mm - Pack Of 2 |
Additional Information
From time to times mall parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of this range Wot-Nots have created a set of Self Locking nuts. The 2 piece pack comes in a M10 size with an inside diameter of 10mm. It is perfect for replacing manifold bolts. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- M10
- Heat resistant
- Nuts 10mm suitable for manifold
ONLY
£3.98
£3.98
Part number: 38686
Important compatibility info
| Height | 15.8 mm |
| Weight | 0.005 kg |
| Material | Plastic |
| Bolt / Nut Version | Sheet Metal Nut |
| Type | Retaining Clip, bonnet noise insulation |
| Function | Retaining Clip, bonnet noise insulation |
| Outer diameter | 20.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.14
£4.14
Part number: 07190
Important compatibility info
| Spanner Size | 12 |
| Weight | 0.004 kg |
| Bolt Head/Nut Design | Male Hex |
| Function | Nut, exhaust manifold |
| Internal Thread Size | M8 x 1,25 |
| Type | Nut, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.26
£4.26
Part number: 39064
Important compatibility info
| Internal Thread Size | M10 x 1,5 |
| Weight | 0.006 kg |
| Thickness | 10.4 mm |
| Spanner Size | 14 |
| Surface | Copper coated |
| Function | Nut, exhaust manifold |
| Type | Nut, exhaust manifold |
| Material | Steel |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.27
£4.27
Part number: 38687
Important compatibility info
| Weight | 0.0052 kg |
| Material | Spring Steel |
| Bolt / Nut Version | Sheet Metal Nut |
| Function | Retaining Clip, bonnet noise insulation |
| Type | Retaining Clip, bonnet noise insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.36
£4.36
Part number: 38838
Important compatibility info
| Length | 19 mm |
| Width | 5 mm |
| Thickness | 16 mm |
| Function | Retaining Clip, bonnet noise insulation |
| Weight | 0.05 kg |
| Type | Retaining Clip, bonnet noise insulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£4.42
£4.42
Part number: PWN824
Important compatibility info
| Title | Nuts - Stainless Steel - M6 |
Additional Information
From time to times mall parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. As part of this range Wot-Nots have created a set of stainless steel nuts. The 8 piece pack comes in a M6 size with an inside diameter of 6mm. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Non Marine Use
- Stainless Steel
- Grade A2
- M6
- Nuts
ONLY
£4.55
£4.55
Part number: PWN262
Important compatibility info
| Title | Copper Washers - Assorted Small - Pack Of 15 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This pack of 15 Copper Washers from Wot-Nots are commonly used to stop nuts rubbing against the component your bolting up or used as a spacer. The 15 piece Copper washers come in assorted small sizes. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Assorted
- Made from copper
- Assorted pack of small (internal diameter) washers
ONLY
£4.81
£4.81
Part number: PWN263
Important compatibility info
| Title | Copper Washers - Assorted Large - Pack Of 9 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances.
Pearl has established a reputation over the years for delivering high quality products. With recent expansions into a more diverse product portfolio of automotive products, its established Wot Nots' brand is still thriving. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Wot-Nots will have the solution for many of these replacement problems. This pack of 9 Copper Washers from Wot-Nots are commonly used to stop nuts rubbing against the component your bolting up or used as a spacer. The 9 piece Copper washers come in assorted large sizes. Wot-Nots are at the cutting edge of pre-pack retailing and as such are the clear market leader for a single solution to stocking a wide range of small carded impulse and distress type products suitable for the Automotive Aftermarket and DIY Car Owners.
- Assorted
- Made from copper
- Assorted Large (internal diameter) washers
ONLY
£5.47
£5.47
Part number: PNN158
Important compatibility info
| Title | Self Locking Nuts - M6 - Pack Of 50 |
Additional Information
From time to time small parts and components need replacing on your vehicle. These need not be expensive or difficult to source. With a wide range of aftermarket parts and accessories for the automotive industry Pearl Automotive will have the solution for many of these replacement problems. As part of this range Pearl Automotive have created a set of Self Locking nuts. The 50 piece pack comes in a M6 size with an inside diameter of 6mm. It is also supplied in a handy clear storage box. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- With nylon insert
- Designed to be used only once in a pack of 50
- Nuts self locking with a nylon insert to ensure it does not shake loose
ONLY
£5.56
£5.56
Part number: 23103
Important compatibility info
| Function | Nut |
| Weight | 0.008 kg |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 8 |
| Type | Nut |
| Surface | Zinc-coated |
| Internal Thread Size | M10 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 21.8 mm |
| Thickness | 11 mm |
| Spanner Size | 15 |
| Colour | Black |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£5.88
£5.88
Part number: PSN117
Important compatibility info
| Title | Steel Nuts - M6 - Pack Of 100 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. As part of this range Pearl Automotive have created their set of M6 Steel Nuts which come as a 100 piece pack. The high quality steel allows the Nuts to withstand high torque pressures faced during automotive use. The set comes supplied in a handy clear storage box. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Din934 Pack of 100
- Made from high quality steel to withstand high torque pressure
ONLY
£6.26
£6.26
Part number: PNP144R
Important compatibility info
| Title | Number Plate Caps & Screws - Yellow - Pack of 50 |
Additional Information
Whether you have lost your number plate, have been in an accident and need to replace or reattach it or if the fixings have come loose or are missing you may need to source some new number plate fixings. This pack of number plate fixings from Pearl Automotive come ready to use in a clear plastic storage container. The set contains 50 pairs (100pc) of screws and caps for fixing number plates to the rear of your vehicle. This pack contains silver coloured screws with yellow caps. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Screw is a number 8 x 3/4 inch long
- Self tapping screw & coloured washer/cap
- Number plate fixing
ONLY
£6.86
£6.86
Part number: 44736
Important compatibility info
| Weight | 0.071 kg |
| Thickness | 20 mm |
| Spanner Size | 38 |
| Surface | Oiled |
| Bolt Head/Nut Design | Male Star |
| DIN / ISO | 6469 |
| Function | Nut, bevel gear |
| Internal Thread Size | M28 x 1,5 |
| Type | Nut, bevel gear |
| Outer diameter | 44.5 mm |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£6.98
£6.98
Part number: PNP145R
Important compatibility info
| Title | Number Plate Caps & Screws - White - Pack of 50 |
Additional Information
Whether you have lost your number plate, have been in an accident and need to replace or reattach it or if the fixings have come loose or are missing you may need to source some new number plate fixings. This pack of number plate fixings from Pearl Automotive come ready to use in a clear plastic storage container. The set contains 50 pairs (100pc) of screws and caps for fixing number plates to the rear of your vehicle. This pack contains silver coloured screws with white caps. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Screw is a number 8 x 3/4 inch long
- Self tapping screw & coloured washer/cap
- Number plate fixing
ONLY
£7.03
£7.03
Part number: 179119
Important compatibility info
| Outer diameter | 90 mm |
| Function | Tab Washer, axle nut |
| Outer diameter 1 | 104 mm |
| Type | Tab Washer, axle nut |
| Inner diameter | 81 mm |
| Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£7.13
£7.13
Part number: 36526
Important compatibility info
| Title | Locking Nut - Toyota - Pack Of 10 |
Additional Information
- Replacement part no. 36526
- Retail clam pack
- Toyota 90189-06006
- OE reference:
ONLY
£7.20
£7.20
Part number: 36527
Important compatibility info
| Title | Locking Nut - Toyota/Lexus - Pack Of 10 |
Additional Information
- Replacement part no. 36527
- Retail clam pack
- Toyota 90189-06013
- OE reference:
ONLY
£7.20
£7.20
Part number: BBW2
Important compatibility info
| Quantity | 10 |
| Inner diameter | 10 mm |
| Thickness | 1.5 mm |
| Type | Washer |
| Material | Aluminium |
| Function | Washer |
ONLY
£7.26
£7.26
Part number: 36525
Important compatibility info
| Title | Locking Nut - Fiat/Peugeot/VW - Pack Of 10 |
Additional Information
- Replacement part no. 36525
- Retail clam pack
- Fiat 14115980 | Peugeot 6992g2 | VW 155809966
- OE reference:
ONLY
£7.32
£7.32
Part number: BBW1
Important compatibility info
| Thickness | 1.5 mm |
| Type | Washer |
| Function | Washer |
| Material | Aluminium |
| Quantity | 10 |
| Inner diameter | 12 mm |
ONLY
£7.42
£7.42
Page 1 of 4
Nuts & Washers
