Proud to be a UK-based company
Contact usClutch Kits 
Fits OPEL CORSA C (X01) 1.3 CDTI (F08, F68)
(2003)
Categories
Important compatibility info
| Weight | 3.700 kg |
| Multi-piece | Two-piece |
| Function | Clutch Kit |
| Number of Teeth | 14 |
| Outer diameter | 217 mm |
| Clutch | Replacement for self-adjusting clutch pressure plate |
| Additional Information | with synthetic grease |
| Extra Description | SMARTFIT Solution Kit |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Blue Print Clutch Pressure Plate (ADZ93229N)
- 1x Blue Print Clutch Disc (ADZ93133)
£67.63
Important compatibility info
| Hub Profile | 18.6 x 15.8 |
| Outer diameter | 216 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Number of Parts | 2 -part |
| Type | Clutch Kit |
| Number of Teeth | 14 |
£84.66
Important compatibility info
| Weight | 4.693 kg |
| Outer diameter | 217 mm |
| Number of Teeth | 14 |
| Multi-piece | Two-piece |
| Function | Clutch Kit |
| Additional Information | with synthetic grease |
| Type | Clutch Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.87
Important compatibility info
| Type | Clutch Kit |
| Function | Clutch Kit |
| Manufacturer Restriction | Borg & Beck Flywheel |
| Replaces | HKR1012 |
£90.73
Important compatibility info
| Additional Information | without central slave cylinder |
| Extra Description | 2-1 Kit |
| Function | Clutch Kit |
| Friction Lining Outer Diameter | 220 mm |
| Type | Clutch Kit |
£93.72
What is a clutch kit?
A clutch kit is an assembly of mechanical components that transfer power from the engine to the drivetrain in a manual transmission car. There are several components that make up the key elements of a clutch kit of which some or all would need to be replaced in a repair.
These are:
Clutch disc
Clutch plate (also known as a pressure plate)
Release bearing or central slave cylinder (also known as a concentric slave or CSC)
Flywheel (dual mass flywheel or single mass)
What comes in a clutch kit?
Clutch kits are available in different packages depending on which individual parts you need to replace. Generally there are 4 ways you can buy these kits:
2 piece kits contain a disc and a plate
3 piece kits contain a disc, plate and either a release bearing or a central slave cylinder
4 piece kits contain a disc, plate, release bearing or CSC and flywheel (also known as a clutch and flywheel kit)
It is good practice to change the release bearing or central slave cylinder when completing a clutch replacement as these additional parts do not cost much more than kits without them and if they fail later the cost of replacement is incurred again.
How do I choose the correct clutch kit?
There are a number of things to consider when selecting the correct replacement clutch parts which largely depend on the manufacture of the vehicle. It is good to take note if these compatibility notes are listed next to a part that is shown as correct for your vehicle. These may include:
Number of gears (i.e. 5 speed or 6 speed etc)
Manual or semi automatic (fully automatic and CVT vehicles do not have a clutch
Transmission type / transmission code
Vehicle manufacture date (this is not the date the vehicle was registered but the date it was made
Engine number sequence (up to or after as specific number/letter
VIN (chassis number) sequence (up to or after as specific number/letter
What brand of clutch kit should I choose?
There are number of manufacturers that you can choose. Some brands such as LuK, Sachs, and Valeo manufacture clutch kits for the original car brands however there are a good number of high quality aftermarket brands of the highest quality and meet or exceed the original specifications. Brands such as Blue Print, National and Borg & Beck offer long warranties which show they have confidence in their products.
How can I tell my clutch kit needs replacing?
We would always recommend that you have your vehicle inspected by a qualified mechanic to receive an accurate diagnosis that your clutch needs replacement. Some of the symptoms of a failing clutch are:
When pressing the clutch pedal it feels different, either more stiff or loose or has dropped to the floor
The clutch makes a noise when the pedal is pressed
It is much harder to change gear
The vehicle does not accelerate even though the engine is revving higher
The clutch does not engage properly after releasing the pedal
