Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.3 kg |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.49
Important compatibility info
| Weight | 0.16 kg |
| Number of Connectors / Ports | 4 |
| Inner diameter | 63 mm |
| Housing Type | with housing |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Outer diameter | 70 mm |
| Material | Plastic |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.39
Important compatibility info
| Weight | 0.9 kg |
| Additional Information | with gasket/seal |
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£252.90
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 0.870 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£125.21
Important compatibility info
| Number of Teeth | 11 |
| Weight | 4.12 kg |
| Rated Power | 2.3 kW |
| Function | Starter |
| Voltage | 12 V |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.67
Important compatibility info
| Inner diameter | 62 mm |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Inner diameter 3 | 74 mm |
| Weight | 0.27 kg |
| Placement on Vehicle | Front Axle, Rear Axle |
| Outer diameter | 94 mm. 86 mm. 78 mm. 66 mm. 38 mm. 32 mm. 28 mm. 24 mm |
| Length | 130 mm |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£10.45
Important compatibility info
| Number of Connectors / Ports | 3 |
| Weight | 0.021 kg |
| Function | Sensor, camshaft position |
| Length | 55.5 mm |
| Type | Sensor, camshaft position |
| Outer diameter | 11 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.97
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Dual Pump |
| Weight | 0.108 kg |
| Function | Washer Fluid Pump, window cleaning |
| Type | Washer Fluid Pump, window cleaning |
| Replaces | 24453; 26471 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.77
Important compatibility info
| Outer diameter | 58 mm |
| Thickness | 11.3 mm |
| Inner diameter | 40 mm |
| Weight | 0.025 kg |
| Placement on Vehicle | Left |
| Material | ACM (Polyacrylate) |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
| Replaces | 11414 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.16
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 155.2 mm |
| Width | 72 mm. 66.7 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.9 mm. 19.9 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 2.54 kg |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.62
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Rims | for light alloy rims |
| Screw length below head | 37 mm |
| Material | Steel |
| Weight | 0.100 kg |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Length | 58 mm |
| Spanner Size | 17 |
| Surface | Zink flake coated |
| Thread Length | 17 mm |
| Bolt Head/Nut Design | Male Hex |
| Quality/ Grade | 10.9 |
| Function | Wheel Bolt |
| Type | Wheel Bolt |
| Outer diameter | 28.3 mm |
| Wheel Fastening | Conical Seat F |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.51
Important compatibility info
| Weight | 0.001 kg |
| Function | Seal, injector holder |
| Inner diameter | 7.3 mm |
| Thickness | 1.5 mm |
| Outer diameter | 16 mm |
| Material | Copper |
| Type | Seal, injector holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.52
Important compatibility info
| Placement on Vehicle | Rear, Centre |
| Length | 77 mm |
| Width | 51 mm |
| Material | Rubber |
| Thickness | 40 mm |
| Type | Mount, exhaust system |
| Function | Mount, exhaust system |
| Weight | 0.096 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.60
Important compatibility info
| Number of Ribs | 6 |
| Type | Alternator |
| Voltage | 12 V |
| Function | Alternator |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 54 mm |
| Pulleys | with freewheel belt pulley |
| Weight | 6.984 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£194.77
Important compatibility info
| Length | 1220 mm |
| Number of Ribs | 6 |
| Weight | 0.854 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38424)
- 1x Febi Belt Tensioner, v-ribbed belt (37266)
£46.37
Important compatibility info
| Weight | 0.1 kg |
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.98
Important compatibility info
| Weight | 0.153 kg |
| Function | Lock Cylinder, ignition lock |
| Lock System | with two keys |
| Type | Lock Cylinder, ignition lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.81
Important compatibility info
| Weight | 0.05 kg |
| Spanner Size | 30 |
| Surface | Zinc-coated |
| Bolt Head/Nut Design | Male Star |
| Function | Nut, bevel gear |
| Internal Thread Size | M26 x 1,5 |
| Type | Nut, bevel gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.84
Important compatibility info
| for OE number | 112 018 02 09 |
| Function | Hose, crankcase ventilation |
| Thickness | 50 mm |
| Width | 50 mm |
| Weight | 0.022 kg |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
| Hose Length | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.31
Important compatibility info
| Surface | Zinc-coated |
| Spanner Size | 17, 19 |
| Outer diameter | 25mm |
£19.68
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023