Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.050 kg |
| Spanner Size | 17 |
| Cable Length | 385 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.41
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.350 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 22 11 6 859 408 |
| External Thread Size | M10 x 1,5 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.42
Important compatibility info
| Weight | 2.250 kg |
| Gasket outer diameter | 71 mm |
| Gasket inner diameter | 64 mm |
| Filter type | Spin-on Filter |
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
| Outer diameter | 119 mm |
| Height | 298 mm |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.43
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| Weight | 0.57 kg |
| for OE number | 009 542 16 18 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 455 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.43
Important compatibility info
| Weight | 0.159 kg |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| for OE number | 08 36 584 |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.43
Important compatibility info
| Weight | 1.926 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 385 mm |
| Core Width | 381 mm |
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.44
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 1.040 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.44
Important compatibility info
| Material | Rubber/Metal |
| Outer diameter | 134 mm |
| Thickness | 32 mm |
| Inner diameter | 37 mm |
| Bolt Hole Circle Diameter | 70 mm |
| Surface | Painted |
| Function | Vibration Damper, propshaft |
| Weight | 1.58 kg |
| Type | Vibration Damper, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.44
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.660 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
| Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Function | Cable Pull, manual transmission |
| Weight | 1.106 kg |
| Inner length 2 | 857 mm |
| Outer length 1 | 1235 mm |
| Inner length 1 | 940 mm |
| Type | Cable Pull, manual transmission |
| Outer length 2 | 1132 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.45
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 30.5 mm |
| for OE number | 31170-RNA-A02 |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 1.144 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.52
Important compatibility info
| Additional Information | with gasket/seal |
| Type | EGR Valve |
| Function | EGR Valve |
| Weight | 0.53 kg |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.54
Important compatibility info
| Number of Chain Links | 170 |
| Function | Timing Chain |
| Placement on Vehicle | Upper |
| Chain Type | Silent Chain, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.6 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.55
Important compatibility info
| Weight | 1.03 kg |
| Placement on Vehicle | Rear |
| Number of Connectors / Ports | 3 |
| Function | Wiper Motor |
| Voltage | 12 V |
| External Thread Size | M8 x 1,25 |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.55
Important compatibility info
| Weight | 0.837 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 186762, 186942, 186781 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.56
Important compatibility info
| Weight | 8.9 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 300 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.56
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | slotted/perforated, internally vented |
| Weight | 12.45 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 350 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.56
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 83 mm |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Weight | 7.668 kg |
| External Teeth, Diff.Side | 26 |
| Transmission-side joint diameter | 78.8 mm |
| Min. Length | 915 mm |
| External Teeth, Wheel Side | 23 |
| Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.58
Important compatibility info
| Weight | 4.2 kg |
| External Thread Size | M12 x 1,5, M16 x 1,5 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm. 130 mm |
| Thickness | 445 mm. 220 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.63
Important compatibility info
| Weight | 1.59 kg |
| Pressure | 8.5 bar |
| Type | Brake Valve, trailer |
| Function | Brake Valve, trailer |
| Internal Thread Size | M22 x 1,5, M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.63
Important compatibility info
| Weight | 6.670 kg |
| Brake Type | Disc Brake |
| Parameter | Typ 16 / 24 |
| Stroke | 64 mm |
| Distance of fastening bolts | 120 mm |
| Piston Rod Length | 15 mm |
| Function | Diaphragm Brake Cylinder |
| Type | Diaphragm Brake Cylinder |
| Internal Thread Size | M16 x 1,5 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.64
Important compatibility info
| for OE number | 03L 965 561 |
| Weight | 0.215 kg |
| Number of Connectors / Ports | 3 |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.67
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
| Weight | 4.6 kg |
| Capacity | 10 l |
| Material | Steel |
| Outer diameter | 206 mm |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Length | 366 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.67
Important compatibility info
| Type | Suspension, propshaft |
| Hole Spacing | 135 mm |
| Inner diameter | 35 mm |
| Additional Information 2 | with ball bearing |
| Weight | 0.306 kg |
| Bearing Type | Ball Bearing |
| Function | Suspension, propshaft |
| Length | 164 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.67
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 8.35 kg |
| Surface | Coated |
| Number of mounting bores | 1 |
| Minimum thickness | 26 mm |
| Centering Diameter | 70 mm |
| Brake Disc Thickness | 28 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Thickness | 45.1 mm |
| Outer diameter | 305 mm |
| Placement on Vehicle | Front Axle |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.68
Important compatibility info
| Weight | 7.396 kg |
| External Teeth, Wheel Side | 28 |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Additional Information | with Split Pin |
| Thread Size | M24x1,5 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 88.9 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Min. Length | 642 mm |
| External Teeth, Diff.Side | 37 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.68
Important compatibility info
| Function | Suspension, propshaft |
| Weight | 0.325 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.68
Important compatibility info
| Type | Mounting, engine |
| Placement on Vehicle | Right Front |
| Weight | 1.641 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.69
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | Soot Particulate Filter |
| Number of Connectors / Ports | 2 |
| Weight | 0.078 kg |
| Cable Length | 1100 mm |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.71
Important compatibility info
| Weight | 0.614 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for turbocharger (art. no.) | 190678, 189887 |
| for OE number | 11 65 7 618 035 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.75
Important compatibility info
| Function | Chain Kit, oil pump drive |
| Timing Chain Size | Z53 |
| Type | Chain Kit, oil pump drive |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 52 |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.322 kg |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (172276)
- 1x Febi Tensioner, timing chain (179357)
- 1x Febi Rail, oil pump drive chain (178541)
£70.76
Important compatibility info
| Weight | 0.628 kg |
| Housing length | 209.5 mm |
| Mounting points diameter | 18 mm |
| Paired article numbers | 32045 |
| Placement on Vehicle | Right Rear |
| Length | 345 mm |
| Eject Force | 1550 N |
| Stroke | 87 mm |
| Housing Diameter | 31 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.76
Important compatibility info
| Paired article numbers | 32046 |
| Placement on Vehicle | Left Rear |
| Length | 345 mm |
| Eject Force | 1550 N |
| Stroke | 87 mm |
| Housing Diameter | 31 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.628 kg |
| Mounting points diameter | 15.5 mm |
| Housing length | 208.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.76
Important compatibility info
| Brake caliper piston diameter | 51 mm |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 2.38 kg |
| Paired article numbers | 182129 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.77
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with screw |
| Thread Size | M16 x 1,5 |
| Bolt Hole Circle Diameter | 104.2 mm |
| Paired article numbers | 181798 |
| Bore Diameter | 10.7 mm |
| External Teeth, Wheel Side | 38 |
| Weight | 7.186 kg |
| Number of mounting bores | 6 |
| Min. Length | 594 mm |
| ABS Ring Diameter | 81 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 83.8 mm |
| Number of Teeth, ABS ring | 45 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.77
Important compatibility info
| Number of Chain Links | 90 |
| Weight | 0.535 kg |
| Type | Timing Chain Kit |
| for OE number | 24351-2F000 S1 |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Chain Type | Simplex, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48570)
- 1x Febi Tensioner, timing chain (176279)
- 1x Febi Guide, timing chain (176280)
- 1x Febi Guide, timing chain (175348)
£70.78
Important compatibility info
| Weight | 6.7 kg |
| Placement on Vehicle | Front Axle |
| Length | 206 mm |
| Width | 190 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 110.2 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.79
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Rear |
| Function | Bush Set, axle beam |
| Material | Rubber |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
| Weight | 1.890 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (22445)
- 2x Febi Screw (22488)
£70.80
Important compatibility info
| Weight | 2.080 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 37141 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.80
Important compatibility info
| Weight | 0.583 kg |
| Outer diameter | 55 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.83
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 9.04 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 296 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 23.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.88
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, compressed-air system |
| Weight | 0.067 kg |
| Type | Sensor, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.91
Important compatibility info
| Weight | 0.04 kg |
| Function | Injector |
| Number of Connectors / Ports | 2 |
| Operating Mode | Electric |
| Additional Information | with gaskets/seals |
| Type | Injector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.91
Important compatibility info
| Weight | 4.7 kg |
| Placement on Vehicle | Rear Axle |
| Length | 635 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 28.5 mm |
| Mounting points diameter | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.91
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178737 |
| Weight | 1.91 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.92
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178736 |
| Weight | 1.91 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.92
Important compatibility info
| Weight | 0.07 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| for OE number | 03G 906 088 BA |
| Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.93
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 61 mm |
| Outer diameter | 82 mm |
| Weight | 3.445 kg |
| Outer diameter 1 | 64 mm |
| Outer diameter 2 | 152 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.94
Important compatibility info
| Seal Material | Metal |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Number of Wings | 8 |
| Material | Cast Aluminium |
| Additional Information 2 | with studs |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Weight | 2.11 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.94
Important compatibility info
| Additional Information 2 | with integrated oil separator |
| Material | Plastic |
| Outer diameter | 150 mm |
| Thickness | 170 mm |
| Type | Air Dryer Cartridge, compressed-air system |
| Function | Air Dryer Cartridge, compressed-air system |
| Weight | 1.966 kg |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.95
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023