Proud to be a UK-based company
Contact us
Important compatibility info
| Inner length 1 | 912 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Weight | 1.358 kg |
| Inner length 2 | 722 mm |
| Outer length 1 | 1070 mm |
| Outer length 2 | 1017 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 7.27 kg |
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 43093 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 17 mm |
| External Thread Size | M16 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size 2 | 19 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Material | Cast Steel |
| Weight | 6.15 kg |
| Placement on Vehicle | Front Axle Left, Upper |
| Steering arm type | Control Arm |
| Paired article numbers | 43092 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 17 mm |
| Cone Size 2 | 19 mm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 0.943 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 70 mm |
| Material | Metal |
| Width of castor bearing surface | 30 mm |
| Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 1.4 kg |
| Driver Position | for right-hand drive vehicles |
| Function | Interior Blower |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Water pump impeller material | Plastic |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Weight | 1.42 kg |
| Seal Material | Rubber |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 168 |
| for OE number | 55210628 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11083)
- 1x Febi Water Pump, engine cooling (10599)
£97.80
Important compatibility info
| Weight | 4.491 kg |
| Type | Air Dryer, compressed-air system |
| Function | Air Dryer, compressed-air system |
| Voltage | 24 V |
| Additional Information 2 | with dryer, with integrated oil separator |
| Rated Power | 100 W |
| Cut-off Pressure | 12 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Weight | 0.666 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 1.7 kW |
| Weight | 3.5 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 3.135 kg |
| Material | Cast Aluminium |
| Number of Teeth | 2 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.81
Important compatibility info
| Weight | 1.98 kg |
| Stabiliser Diameter | 19.6 mm |
| Placement on Vehicle | Rear Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Additional Information | with rubber mounts |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171117)
- 2x Febi Link/Coupling Rod, stabiliser bar (102444)
£97.83
Important compatibility info
| Weight | 1.31 kg |
| Type | Air Filter |
| Length | 362 mm |
| Height | 290 mm |
| Filter type | Filter Insert |
| Width | 124 mm |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.83
Important compatibility info
| Centering Diameter | 79 mm |
| Surface | Coated |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| Weight | 12.02 kg |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Brake Disc Thickness | 30 mm |
| Thickness | 76 mm |
| Outer diameter | 344 mm |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.87
Important compatibility info
| Weight | 0.224 kg |
| Placement on Vehicle | Left |
| Type | Connecting Cable, injector |
| Function | Connecting Cable, injector |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.87
Important compatibility info
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Colour | Black |
| Weight | 1.074 kg |
| Additional Information | with gasket/seal |
| Type | Cylinder Head Cover |
| for OE number | 03L 103 469 F |
| Material | Plastic |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.90
Important compatibility info
| Stabiliser Diameter | 19.6 mm |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Weight | 2.18 kg |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171119)
- 2x Febi Link/Coupling Rod, stabiliser bar (36989)
- 4x Febi Fastening Bolt, stabiliser bar (39643)
£97.91
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.761 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.91
Important compatibility info
| Weight | 1.778 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 431 mm |
| Core Width | 482 mm |
| Core Depth | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.92
Important compatibility info
| Material | Aluminium |
| Operating Mode | Mechanical |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 1.3 kg |
| Type | Water Pump, engine cooling |
| Additional Information 2 | non-switchable water pump, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.97
Important compatibility info
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Weight | 0.605 kg |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.99
Important compatibility info
| Weight | 0.573 kg |
| Type | Repair Kit, driver cab suspension |
| Function | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.03
Important compatibility info
| Weight | 20.8 kg |
| Function | Brake Disc |
| Additional Information 2 | with bolts/screws |
| Centering Diameter | 181 mm |
| Surface | Coated |
| Minimum thickness | 41 mm |
| Brake Disc Type | Internally Vented |
| Placement on Vehicle | Rear Axle, Front Axle |
| Outer diameter | 375 mm |
| Brake Disc Thickness | 45 mm |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.06
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 2.368 kg |
| Cone Size | 19 mm |
| External Thread Size | M16 x 1,5 |
| Material | Aluminium |
| Paired article numbers | 183284 |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.07
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 17.8 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle Left |
| Outer diameter | 385 mm |
| Thickness | 62.1 mm |
| Brake Disc Thickness | 36 mm |
| Minimum thickness | 34.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Paired article numbers | 107503 |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.08
Important compatibility info
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Weight | 1.974 kg |
| Paired article numbers | 176756 |
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.09
Important compatibility info
| Inner length 1 | 775 mm |
| Outer length 1 | 1095 mm |
| Inner length 2 | 687 mm |
| Weight | 1.012 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 2 | 997 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.09
Important compatibility info
| Placement on Vehicle | both sides |
| Weight | 1.625 kg |
| for OE number | 31401726 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.12
Important compatibility info
| Rod/Strut | Push Rod |
| Mounting points diameter | 19 mm |
| Weight | 10.700 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Trailing Arm |
| Outer diameter | 48 mm |
| Length | 573 mm |
| Placement on Vehicle | Rear Axle Left, Lower, Front Axle, Rear Axle Right |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.16
Important compatibility info
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M10 x 1,6, M16 x 2 |
| Weight | 8.8 kg |
| Outer diameter | 258 mm. 227 mm |
| Thickness | 133 mm. 495 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.17
Important compatibility info
| Additional Information | with oil drain plug |
| Weight | 3.65 kg |
| Additional Information 2 | with seal ring |
| External Thread Size | M16 x 1,5 |
| Length | 421 mm |
| Wet Sump Material | Aluminium |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.19
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Weight | 0.04 kg |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.23
Important compatibility info
| Weight | 0.23 kg |
| Housing Type | with housing |
| Material | Plastic |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| for OE number | 13 62 7 566 986 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.23
Important compatibility info
| Width | 157 mm |
| Placement on Vehicle | Upper Left |
| Function | Mounting, automatic transmission |
| Length | 193 mm |
| Number of Connectors / Ports | 2 |
| Weight | 1.997 kg |
| Type | Mounting, automatic transmission |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Height | 153 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.24
Important compatibility info
| Weight | 0.104 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.27
Important compatibility info
| Weight | 1.0 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 186689, 191474, 187608, 191957 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.29
Important compatibility info
| Function | Timing Chain Kit |
| Timing Chain Size | G53HC |
| Type | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Weight | 0.909 kg |
| for OE number | 98 228 270 80 S3 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (171786)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Guide, timing chain (29903)
£98.31
Important compatibility info
| Function | Air Tank, compressed-air system |
| Capacity | 25 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Length | 625 mm |
| Material | Steel |
| Outer diameter | 246 mm |
| Internal Thread Size | M22 x 1,5 |
| Weight | 8.9 kg |
| Number of Connectors / Ports | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.34
Important compatibility info
| Weight | 1.85 kg |
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 120 |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21724)
- 1x Febi Water Pump, engine cooling (24360)
£98.35
Important compatibility info
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Weight | 2.0 kg |
| Vehicle Equipment | for vehicles with electric parking brake |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 183207 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.38
Important compatibility info
| Weight | 2.0 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Additional Information | with electric motor |
| Material | Cast Aluminium |
| Paired article numbers | 183206 |
| Placement on Vehicle | Rear Axle Right |
| Vehicle Equipment | for vehicles with electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.38
Important compatibility info
| Placement on Vehicle | Rear Axle, Front |
| Outer diameter | 258 mm. 225 mm |
| Thickness | 190 mm. 623 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Weight | 6.51 kg |
| External Thread Size | M16 x 1,5, M22 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.39
Important compatibility info
| Function | Bush, parabolic spring |
| Weight | 9.169 kg |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.49
Important compatibility info
| Weight | 10.0 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 255 mm. 180 mm |
| Thickness | 280 mm. 165 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.50
Important compatibility info
| Weight | 9.25 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 64.5 mm |
| Outer diameter | 297.5 mm |
| Thickness | 98.5 mm |
| Inner diameter | 254.2 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 79 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 255.6 mm |
| Function | Brake Drum |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.51
Important compatibility info
| Weight | 0.188 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 186656 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.51
Important compatibility info
| Placement on Vehicle | Rear |
| Width | 254 mm |
| Weight | 4.867 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Hole Spacing | 205 mm |
| External Thread Size | M20 x 2,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.57
Important compatibility info
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 690 mm |
| Placement on Vehicle | Front Axle |
| Mounting points diameter | 39 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| Min. Length | 409 mm |
| Pipe Diameter | 63.4 mm. 54 mm |
| External Thread Size | M14 x 1,5 |
| Weight | 4.3 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.58
Important compatibility info
| Weight | 1.057 kg |
| Function | Timing Belt Kit |
| Width | 25 mm |
| Number of Teeth | 145 |
| for OE number | 04L 109 119 D S8 |
| Type | Timing Belt Kit |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (48289)
- 1x Febi Tensioner Pulley, timing belt (178943)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37019)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (07022)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (181517)
£98.58
Important compatibility info
| Function | Repair Kit, kingpin |
| Outer diameter | 43 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Repair Kit, kingpin |
| Weight | 3.2 kg |
| Length | 194 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (24773)
- 1x Febi Bush, kingpin (171963)
- 2x Febi Lock Ring, steering knuckle (03728)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Lock Ring, steering knuckle (171964)
- 2x Febi Circlip (03729)
- 1x Febi Spacer, kingpin (28069)
- 1x Febi Spacer, kingpin (28070)
- 1x Febi Spacer, kingpin (28071)
- 1x Febi Spacer, kingpin (28072)
- 1x Febi Spacer, kingpin (28073)
- 1x Febi Spacer, kingpin (28074)
- 1x Febi Spacer, kingpin (28075)
- 1x Febi Spacer, kingpin (28076)
- 1x Febi Spacer, kingpin (46058)
- 1x Febi Spacer, kingpin (46059)
- 1x Febi Spacer, kingpin (46060)
- 1x Febi Spacer, kingpin (46061)
- 1x Febi Spacer, kingpin (46062)
- 1x Febi Bush, steering knuckle (107409)
- 1x Febi Seal Ring, steering knuckle (46056)
£98.59
Important compatibility info
| Weight | 10.4 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 324 mm |
| Thickness | 77.1 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.60
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023