Engine Oils

Carlube Triple R 0W-30 R-Tec 11 is an ultra-high performing engine oil that has been developed to provide maximum engine protection, fuel economy savings and meet the exacting requirements of BMW LL-12 FE performance level.

Triple R 0W-30 R-Tec 11 delivers a substantial fuel economy without compromising wear performance.
This oil provides excellent performance in piston cleanliness in a whole wide range of engines, controlling the viscosity increase, reducing the formation of sludge and keeping the turbocharger clean, for better engine efficiency and power output.
It provides enhanced engine reliability by controlling wear on critical engine parts exposed to severe mechanical stress.

Carlube Triple R 5W-30 R-Tec 19 is an ultra high performing engine oil that has been developed to meet the exacting requirements of Volkswagen VW 504.00/507.00 performance level.

This oil is suitable for use in older vehicles as well as the most modern engines. As a lubricant that meets the highest performance engine oil specification, it provides superior engine cleanliness, wear protection, fuel economy and after treatment device compatibility, prevents the formation of harmful engine sludge and deposits. Keeps key components cool, clean, lubricated and working at their best, providing an impressive 1.7% improvement in fuel economy.

• Provides ultimate protection against wear under all operating conditions
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption Demonstrates up to 0 7% fuel economy improvement in relation to higher viscosity reference fluids (SAE 5W-30 to WSS M2C913 D)
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits Passed the Daimler biodiesel oxidation test (80% diesel and 20% bio diesel)
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst) systems Low SAPS output keeps the emission control system clean and in optimal conditions
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: GM dexos1 Gen 2 D10834IE103 Meets: API: SN, ILSAC GF-5
• API Resource Conserving

Carlube Triple R 0W-40 R-Tec 12 has a unique technology that provides superior oxidation control, wear protection, cleanliness and acid neutralisation, Test results show that this oil has excellent low-temperature pump-ability with proven performance down to -40°C.

Even at these extreme temperatures, the oil protects bearings and vital components from weight loss, wear, and corrosion.
Triple R 0W-40 R-Tec 12 provides excellent fuel economy performance and keeps engines clean by reducing the build-up of sludge in critical areas.
This product offers excellent viscosity increase control in both gasoline and diesel engines and prevents varnishes from building up on pistons, keeping grooves cleaner and piston rings free.

Technical Information

Engine oils: Motorcycle Motorcycle 4T eng oil -- Part Synthetic

Castrol POWER1 4T is an advanced, premium quality, part-synthetic engine oil developed for the latest generation 4-stroke motorcycle engines. It is designed specifically for bikers who love the exhilaration of riding. Up to 30% of power is lost due to friction without you knowing it. Castrol POWER1 4T with Power Release TechnologyTM boosts the performance of your bike by optimising friction and enables you to accelerate faster.

Application

Castrol POWER1 4T is designed to optimise performance for motorcycle engines. It is suitable for all makes of 4-stroke bikes, both carburetor or fuel injected where API SN (or below) and JASO MA or MA2 are recommended.

Advantages

• Tested and proven to deliver superior acceleration at the twist of the throttle
• Power Release TechnologyTM optimises friction in the clutch and reduces internal engine losses due to friction
• Complies with requirements of catalyst equipped engines

Product Performance Claims

• API SL
• JASO MA2

• Its Power Release Formula is specially designed to enable your bike to deliver maximum and sustained power right up to very high operating rpm thus offering a significant advantage over other motorcycle engine oils.
• Castrol Power1 4T reduces internal losses in the engine, whilst retaining optimum wet clutch performance to ensure efficient transfer of power to the rear wheel.
• Tested and proven to deliver improved acceleration at the touch of the throttle
• Castrol Power1 4T - engineered for performance

• API SN
• JASO MA2

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Castrol MAGNATEC 0W-30 C2 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2, 0W-30 lubricant.
• Castrol MAGNATEC clings like a magnet to critical engine parts and locks in place to deliver 50% better engine wear protection*. Helping to safeguard your engine’s vital components - the valvetrain, timing chain, pistons, and bearings - from damage and wear.
• Forms a resistive barrier between metal contact points in the valvetrain
• Manages abrasive piston deposits, guarding against cylinder liner wear
• Maintains timing chain tension and engine synchronicity by minimising chain damage and elongation
• reserves engine bearings from corrosive wear

• Product Performance Claims: ACEA C2
• PSA Approval B71 2302, PSA Approval B71 2312
• Meets Fiat 9.55535-DS1/ GS1

Technical Information

Leistungsstarkes Motoröl auf Basis ausgewählter Mineralöle. Sorgt für optimale Leistung und Schutz des Motors unter allen Betriebsbedingungen. Sichere Schmierung, optimale Geräuschdämpfung sowie geringer Verschleiß sind ebenso selbstverständlich wie sanftes Ein- und Auskuppeln sowie Schalten. Kat-getestet.

Technical Information

Heavy-duty motor oil based on selected mineral oils. Ensures optimum performance and protection of the engine under all operating conditions. Reliable lubrication, optimum noise damping and low wear are just as much taken for granted as gentle clutch engagement and disengagement and gear shifting. Tested on engines with catalytic converters.

Carlube Triple R 0W-20 R-Tec 2 is suitable for the latest fuel-efficient cars meeting Euro 6 where 0W-20 SAE grade is recommended.

It keeps hot running engine components clean including the prevention of deposit in Turbochargers.
The SAPS level ensures after-treatment operation over its lifetime including engines equipped with Gasoline Particulate Filters.
Carlube Triple R 0W-20 R-Tec 2 also provides multiple 0W-20 OEM specifications on one oil. This reduces complexity and the need to stock several oils.
The product delivers a high fuel economy in the latest OEM specifications. Delivers cleanliness and turbocharger protection in highly loaded engines

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

• Suitable for use in hybrid cars
• Stronger under pressure in today’s modern engines
• Delivers more horsepower and greater acceleration*
• Demonstrates improved performance as a result of better fuel economy*
• Recommended for world-leading car manufacturers, motorsport teams and mechanics
• Castrol EDGE is stronger under pressure. It unlocks your engine’s performance and efficiency to deliver more power with the same fuel.* Castrol EDGE: unlock the very edge of performance.

• ACEA A1/B1, A5/B5, API SL/CF
• Volvo 95200377