Engine Oils

• Low Speed pre-ignition protection incorporated
• Valvoline Hybrid C-Series engine oils can also be used in engines that require an ACEA: C3, API: SP and API: SN engine oil in the SAE 5W30 viscosity grade
• Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
• Excellent water tolerance and separation capability to prevent sludge forming
• Enhanced soot control to prevent premature oil degradation
• Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
• Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency
• Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv

• Meets: ACEA: C5
• API: SN, SP

• Prevention of sludge and varnish formation
• Excellent anti-wear characteristics
• Compatible with after-treatment systems
• Outstanding thermal properties

• ACEA C3, VW 504:00/507:00, BMW LL-04, PORSCHE C30

• Very high standards of engine cleanliness
• Fully synthetic, long drain formulation
• Compatibility with after treatment systems
• Fuel saving technology

• BMW LONGLIFE-12 FE

• Provides ultimate protection against wear under all operating conditions
• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption Demonstrates up to 0 7% fuel economy improvement in relation to higher viscosity reference fluids (SAE 5W-30 to WSS M2C913 D)
• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Keeps engine extremely clean by minimizing deposits Passed the Daimler biodiesel oxidation test (80% diesel and 20% bio diesel)
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst) systems Low SAPS output keeps the emission control system clean and in optimal conditions
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions Designed to fulfill the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: GM dexos1 Gen 2 D10834IE103 Meets: API: SN, ILSAC GF-5
• API Resource Conserving

Fully synthetic engine oil manufactured to give maximum performance with unrivalled protection from cold start to high temperature driving.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Carlube 2-Stroke Motorcycle Oil is formulated to cope with high revving and higher operating temperatures experienced with motorcycle engines. These oils are suitable for small engine scooters to large V twin engines, sports and racing motorcycles.

• Provides high performance with exceptional fuel economy
• Exceptional long term engine protection
• Provides protection for diesel particulate filters and catalytic converters
• An ideal choice for use in many Peugeot and Citroen vehicles

• ACEA C2, API SN/CF
• FIAT 9.55535-S1, PSA B71 2290 (Pre 2017), Renault RN0700

• Instant oil flow at low temperatures provides easy cold starts and optimal lubrication within seconds after ignition
• Formulated for excellent product stability. Long lasting performance and suitable for long drain intervals
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system last longer
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: Renault RN0720 Meets: ACEA C4
• MB 229.51, Meets requirements of some models of Nissan* and Suzuki*.

Carlube Triple R 5w30 Fully Synthetic is a longlife motor oil suitable for the latest generation of petrol and diesel engines, on fixed and variable service intervals, and requiring a low SAPS/Low ash engine oil.

Optimum engine performance and improved fuel economy. Reduced exhaust emissions and reduced friction and wear. Exceptional all year round protection from cold start to high temperature driving.

• Provides ultimate engine protection for all driving conditions
• Suitable for a wide range of vehicles
• Blended with high quality synthetic and mineral base materials
• Fuel efficient multi-grade engine oil

• ACEA A3/B3, A3/B4, API SL/CF
• VW 502.00/505.00, MB 229.1

• Exceptional low temperature performance
• Zero compromise in engine protection
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency

• ACEA C5, API SN
• JAGUAR LAND ROVER STJLR.51.5122, MERCEDES BENZ MB 229.71

Carlube Triple R 5W-50 R-Tec 29 fully synthetic motor oil is suited for a broad range of applications including motorsport, classic/collector cars and extreme driving conditions like towing and high operating temperatures.

Optimum engine performance and improved fuel economy
Exceptional all year round protection from cold start to high-temperature driving

Carlube 4-Stroke Fully Synthetic Motorcycle oil is formulated to cope with high revving and higher operating temperatures experienced with motorcycle engines. These oils are suitable for small engine scooters to large V twin engines, sports and racing motorcycles.

Eliminates piston ring and prevents power valve sticking providing a cleaner engine allowing for long lasting power and best performance. Proven engine durability and cleanliness allowing for long lasting power. Prevention of soot formation, sludge and deposits in turn protecting engine from damage. Constant lubrication protecting all engine components against wear.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol MAGNATEC 5W-40 DPF's intelligent molecules don't. They cling to the engine like a magnet providing an extra layer of protection.

Castrol MAGNATEC 5W-40 DPF's formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.

Castrol MAGNATEC 5W-40 DPF. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test.

Application

Castrol MAGNATEC 5W-40 DPF is suitable for use in automotive diesel and gasoline engines where the manufacturer recommends an API CF/SN or ACEA C3 5W-40 lubricant including vehicles fitted with a diesel particulate filter.

Castrol MAGNATEC 5W-40 DPF is approved for use in vehicles from a number of leading manufacturers please refer to specifications and owner's hand book.

Advantages

• Synthetic Diesel technology to provide increased protection in high and low temperature applications;
• Provides continuous protection for all driving conditions, styles and temperatures;
• Delivers superior performance under extreme cold start up conditions

Castrol MAGNATEC 5W-40 DPF - suitable for TDI, DI, Inter-cooled, Turbocharged engines, CRDI engines.

Product Performance Claims

• ACEA C3
• API CF/SN
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• MB-Approval 229.31/ 229.51
• OPEL OV 040 1547 - D40
• VW 505.00/ 505.01

• Delivers superior performance under extreme cold start up conditions
• Provides continuous protection for all driving conditions, styles and temperatures
• Synthetic Diesel technology to provide increased protection in high and low temperature applications
• Castrol MAGNATEC 5W-40 DPF’s formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.

• ACEA C3, API CF/SN
• Meets Fiat 9.55535-S2, Meets Ford WSS-M2C917-A, MB-Approval 229.31/ 229.51, OPEL OV 040 1547 - D40, VW 505.00/ 505.01

• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• Keeps engine extremely clean by minimizing deposits. Passed the Daimler biodiesel oxidation test (80% diesel and 20% bio diesel)
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system last longer
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Meets: ACEA C2
• Ford WSS-M2C950-A. Suitable for use in some models of: Honda, Jeep, Mitsubishi, Subaru, Suzuki, Toyota*.

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently. Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol MAGNATEC 5W-30 A5 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A1/B1, A5/B5, API SN, ILSAC GF-5 or earlier specification 5W-30 lubricant.

Castrol MAGNATEC 5W-30 A5 is approved for use in vehicles where a 5W-30 lubricant that Meets - Ford WSS-M2C913- C/WSS-M2C913-D is required, please refer to your owners handbook.

Product Performance Claims

• ACEA A1/B1, A5/B5
• API SN ILSAC GF-5
• Meets - Ford WSS-M2C913-C/WSS-M2C913-D

• Deliver unique protection designed specifically for modern driving
• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to reduce warm-up and stop-start wear
• Castrol MAGNATEC: Non-stop protection from every start.

• ACEA A1/B1, A5/B5, API SN
• ILSAC GF-5
• Meets - Ford WSS-M2C913-C/WSS-M2C913-D

• High thermal and oxidation stability resists oil breakdown
• Strong oil film in combination with specialised additives provide high resistance against extreme pressure and high operating temperatures
• Enhanced anti-foaming formulation ensures superior protection at high engine rpm
• VR1 Racing is formulated for ultimate performance under extreme operating conditions. Contains special additives that ensure optimal power output and maximum wear resistance for both turbocharged and non turbo charged petrol engines
• Maximum race-level performance and protection

• Meets: ACEA A3/B4, API: SL
• Ford WSS-M2C-153E, GM 6094M. Recommended for use where Fiat 9.55535.H3 is specified

• Keeps engine extremely clean by minimizing deposits
• Special additives prevent the formation of sludge and harmful deposits inside the engine
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system last longer
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: Jaguar Land Rover STJLR 03.5005 Meets: ACEA C1 and C2
• Recommended for in-warranty service fill where Ford WSSM2C934-B is required, Meets requirements of Land Rover, Jaguar, Mitsubishi *Check owner’s manual before use

• Exceptional low temperature performance
• Zero compromise in engine protection
• Ensures consistent lubricant performance over extended drain intervals
• Excellent fuel efficiency

• ACEA C5, API SN, JAGUAR LAND ROVER STJLR.51.5122, MERCEDES BENZ MB 229.71

• High thermal and oxidation stability resists oil breakdown
• Strong oil film in combination with specialized additives provide high resistance against extreme pressure and high operating temperatures
• Enhanced anti-foaming formulation ensures superior protection at high engine rpm
• VR1 Racing is formulated for ultimate performance under extreme operating conditions Contains special additives that ensure optimal power output and maximum wear resistance for both turbocharged and non turbo charged petrol engines
• Maximum race-level performance and protection

• Meets: ACEA A3/B4, API: SL
• Ford WSS-M2C-153E, GM 6094M

• Low viscosity and special additives result in maximum reduction of friction which results in a lower fuel consumption
• Keeps engine extremely clean by minimizing deposits. Passed the Daimler biodiesel oxidation test (80% diesel and 20% bio diesel)
• Specifically designed for use with emission control systems like DPF (Diesel Particulate Filter) and TWC (Three Way Catalyst). Low SAPS output makes the emission control system last longer
• SynPower engine oil is formulated with the highest quality base oils and latest additives to ensure ultimate protection and performance under all operating conditions. Designed to fulfil the latest standards of leading engine manufacturers
• OEM approved premium grade motor oil

• Approved: BMW LL-17FE+, MB-approval 229.71, Volvo VCC RBS0-2AE Meets: ACEA C5, API: SN Plus RC ILSAC GF-5
• BMW LL-14FE+, General Motors / Vauxhall (pending)

• Low Speed pre-ignition protection incorporated
• Valvoline Hybrid C-Series engine oils can also be used in engines that require an ACEA: C2, API: SP and API: SN engine oil in the SAE 5W30 viscosity grade.
• Enhanced oxidation stability to ensure engine durability in the most severe stop-start cycles
• Excellent water tolerance and separation capability to prevent sludge forming
• Enhanced soot control to prevent premature oil degradation
• Enhanced oxidation stability to ensure engine durability in the most adverse stop-start situations. Improved oil flow and fast response at low temperature to prevent wear during the most severe stop-start conditions
• Enhanced anti-wear additives to ensure a longer engine life and maintain vehicle efficiency
• Valvoline Hybrid C-series engine oils are formulated with specially selected additives and antioxidants to ensure an increased level of protection in terms of oxidation, corrosion and wear especially for the hybrid vehicle challenges when compared to conv

• Meets: ACEA: C5
• API: SN, SP

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Up to 75% of engine wear happens while your engine warms up. When the engine stops, oil drains off critical engine parts, however Castrol MAGNATEC's Intelligent Molecules don't. They cling to the engine like a magnet, providing an extra layer of protection. Castrol MAGNATEC's formulation protects from the moment you start, dramatically reducing engine wear*. Castrol MAGNATEC. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test.

Application

Castrol MAGNATEC 5W-30 C2 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an ACEA C2 5W-30 lubricant.

Castrol MAGNATEC 5W-30 C2 is approved for use in Peugeot Citroen vehicles that require a PSA Approval B71 2290 5W-30 lubricant.

Advantages

Castrol MAGNATEC's Intelligent Molecules:

• Cling to engine parts when the oil drains down
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Are combined with synthetic technology to provide increased protection in high and low temperature applications
• Provide continuous protection for different driving conditions, styles and temperatures

Product Performance Claims

• ACEA C2
• PSA Approval B71 2290

• Provide continuous protection for different driving conditions, styles and temperatures
• combined with synthetic technology to provide increased protection in high and low temperature applications
• Adsorbs to metal surfaces to make engine parts more resistant to wear
• Cling to engine parts when the oil drains down
• Castrol MAGNATEC: Non-stop protection from every start.

• ACEA C2
• PSA Approval B71 2290

• Very high standards of engine cleanliness
• Fully synthetic, long drain formulation
• Compatibility with after treatment systems
• Fuel saving technology

• ACEA C2
• BMW LONGLIFE-12 FE

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Part synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol MAGNATEC 10W-40 A/B is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA A3/B4, API SP 10W-40 lubricant. Castrol MAGNATEC 10W-40 A/B is approved for use in vehicles from leading manufacturers, please refer to the specifications section and your owners handbook.

Product Performance Claims

• ACEA A3/B4
• API SP
• Meets - Fiat 9.55535-D2
• MB-Approval 229.3
• VW 501 01/ 505 00

• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect..
• DUALOCK molecules cling to critical engine parts and lock to protect and reduce warm-up wear
• Deliver protection designed specifically for modern driving
• Castrol MAGNATEC. Non-stop protection from every start.

• ACEA A3/B4, API SP
• MB-Approval 226.5/ 229.3, Renault RN0700 / RN0710, VW 501 01/ 505 00, Meets Fiat 9.55535-D2

• Provides outstanding wear protection
• Backwards compatible to Ford M2C913-A and 913-B specifications
• Delivers high performance with exceptional fuel efficiency
• Suitable for many Ford vehicles (excluding EcoBoost & EcoBlue engines)

• ACEA A5/B5, A1/B1, API SL/CF
• FORD WSS-M2C913-D, WSS-M2C913-C, JAGUAR LAND ROVER STJLR.03.5003, RENAULT RN0700
• FORD WSS-M2C913-D, WSS-M2C913-C, JAGUAR LAND ROVER STJLR.03.5003, RENAULT RN0700

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Castrol GTX is one of the world's most trusted engine oils. It's more than just oil. It's liquid engineering that protects against the problems your engine faces every day.

Severe driving conditions can cause the build up of a thick, tar-like substance called sludge. Sludge can block your engine's vital oilways like cholesterol - and if untreated it can rob an engine of power and, ultimately, its life. Castrol GTX Double Action formula cleans away old sludge*, and protects against new sludge formation better than tough industry standards

Help extend the life of your engine with Castrol GTX.

Castrol GTX 5W-30 C4 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C4 5W-30 lubricant. Castrol GTX 5W-30 C4 is approved for use in vehicles that require a Renault RN 0720 approved 5W-30 lubricant. Castrol GTX 5W-30 C4 is approved for use in vehicles that require a MB-Approval 226.51 approved 5W-30 lubricant

• Provides superior protection against engine sludge
• Advanced protection against viscosity and thermal breakdown
• Premium quality base oils and anti-wear additives to help extend the life of your engine
• Helps minimize oil consumption

Specification

• ACEA C4
• MB-Approval 226.51
• Renault RN 0720

• Castrol GTX keeps engines cleaner for longer, 35% cleaner than industry standards
• Contains premium synthetic technology base oils and anti-wear additives
• Demonstrates exceptional protection against high temperature deposits
• Provides advanced protection against viscosity and thermal breakdown
• Delivers superior protection against sludge caused by pollutants, heat and frequent short trips.
• Castrol GTX: helps extend engine life

• ACEA C4
• MB-Approval 226.51, Renault RN 0720

Technical Information

Engine oils: Passenger Car (and car derived van) Pass car eng oil -- Synthetic

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That's annoying, but worse, it slowly damages your engine - permanently.

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique protection designed specifically for modern driving

Castrol MAGNATEC: Non-stop protection from every start.

Application

Castrol Magnatec 5W-20 E is a fully synthetic lubricant suitable for use vehicles that require a 5W-20 lubricant that Meets Ford WSS-M2C948-B specification.

Product Performance Claims

• Approved - Ford WSS-M2C948-B

• Deliver unique protection designed specifically for modern driving
• Castrol MAGNATEC’s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to reduce warm-up and stop-start wear
• Castrol MAGNATEC: Non-stop protection from every start.

• Approved - Ford WSS-M2C948-B

• Provides protection for diesel particulate filters and catalytic converters
• Provides high performance with fuel efficiency
• Suitable for VW PD engines, GM dexos2, modern and certain Fiat & Ford KA models
• A highly advanced low SAPS engine oil

• ACEA C3, API SN/CF
• BMW LONGLIFE-04, GM Dexos 2, MB-229.51, MB-229.31, FIAT 9.55535-S2, FORD WSS-M2C917-A, Porsche A40, RENAULT RN0700, RN0710