Mountings & Bushes Mountings & Bushes
Fits VW POLO V (6R1, 6C1) 1.2
(2009)

Part number: 27640
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Stabiliser Bar Diameter: 19 mm; for PR number: 0AR
Width 35 mm
Material Rubber
Inner diameter 17 mm
Placement on Vehicle Front Axle
Weight 0.03 kg
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 27640 Anti Roll Bar Bush
ONLY
£4.19
Quantity:
Part number: 27642
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Stabiliser Bar Diameter: 20 mm; for PR number: 0AS
Width 35 mm
Material Rubber
Inner diameter 18 mm
Placement on Vehicle Front Axle
Weight 0.03 kg
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 27642 Anti Roll Bar Bush
ONLY
£4.52
Quantity:
Material Rubber/Metal
Outer diameter 33 mm. 36 mm
Thickness 54 mm
Inner diameter 12 mm
Weight 0.100 kg
Placement on Vehicle Front Axle Left, Front, Front Axle Right
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 07856 Wishbone / Control / Trailing Arm Bush
ONLY
£4.77
Quantity:
Diameter 12 mm. 32 mm
Length 54 mm
Type Mounting, control/trailing arm
Function Mounting, control/trailing arm
Placement on Vehicle Lower, Front, Front Axle Left, Front Axle Right
Paired article numbers NST8162
NAPA NST8162 Wishbone / Control / Trailing Arm Bush
ONLY
£4.98
Quantity:
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Diameter 12 mm. 32 mm
Length 54 mm
Placement on Vehicle Lower, Front, Front Axle Left, Front Axle Right
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Paired article numbers AST8162
Apec AST8162 Wishbone / Control / Trailing Arm Bush
ONLY
£5.01
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Upper
Function Spring Seat
Type Spring Seat
Placement on Vehicle Front Axle, Left, Right, Upper
Borg & Beck BSM5365 Spring Cap / Seat
ONLY
£5.07
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Upper
Function Spring Seat
Type Spring Seat
Placement on Vehicle Front Axle, Left, Right, Upper
First Line FSM5365 Spring Cap / Seat
ONLY
£5.07
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Lower; Fitting Position: Front
Inner diameter 12.1 mm
Diameter 32.4 mm
Length 54 mm
Function Mounting, control/trailing arm
Only in connection with FCA5817, FCA5818, FCA5819, FCA5820, FCA5912, FCA5913, FCA6111, FCA6112, FCA6113, FCA6114, FCA6457, FCA6458, FCA6459, FCA6460, FCA6735, FCA6736, FCA6737, FCA6738
Type Mounting, control/trailing arm
Paired article numbers FSK6009
Replaces BSK5935
Borg & Beck BSK6009 Wishbone / Control / Trailing Arm Bush
ONLY
£5.09
Quantity:
Material Rubber/Metal
Outer diameter 60 mm. 27 mm
Thickness 41 mm
Inner diameter 13 mm
Placement on Vehicle Front Axle Right, Front Axle Left, Lower, Rear
Weight 0.108 kg
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 10814 Wishbone / Control / Trailing Arm Bush
ONLY
£5.09
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Lower; Fitting Position: Front
Only in connection with FCA5817, FCA5818, FCA5819, FCA5820, FCA5912, FCA5913, FCA6111, FCA6112, FCA6113, FCA6114, FCA6457, FCA6458, FCA6459, FCA6460, FCA6735, FCA6736, FCA6737, FCA6738
Length 54 mm
Inner diameter 12.1 mm
Diameter 32.4 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Replaces FSK5935
Paired article numbers FSK6009
First Line FSK6009 Wishbone / Control / Trailing Arm Bush
ONLY
£5.09
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Lower; Fitting Position: Front
Outer diameter 1 33 mm
Thickness/Strength 1 54 mm
Inner diameter 1 12 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Delphi TD239W Wishbone / Control / Trailing Arm Bush
ONLY
£5.11
Quantity:
Part number: 819012510
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Stabiliser Bar Diameter: 20 mm
Placement on Vehicle Front Axle
Inner diameter 18 mm
Bearing/Mounting Type Rubber Mount
Type Mounting, stabiliser bar
Function Mounting, stabiliser bar
FAG 819012510 Anti Roll Bar Bush
ONLY
£5.23
Quantity:
Part number: 27638
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Stabiliser Bar Diameter: 18 mm; for PR number: 0AQ
Weight 0.03 kg
Width 35 mm
Material Rubber
Inner diameter 16 mm
Placement on Vehicle Front Axle
Function Mounting, stabiliser bar
Thread Length 32.5 mm. 15.5 mm
Type Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 27638 Anti Roll Bar Bush
ONLY
£5.38
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Specification: Axle set
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Placement on Vehicle Front Axle Left, Front Axle Right
Paired article numbers NST8081
for OE number 6Q0411314R
NAPA NST8081 Wishbone / Control / Trailing Arm Bush
ONLY
£5.54
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Specification: Axle set
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Diameter 18 mm
Manufacturer SEAT SKODA VOLKSWAGEN
Placement on Vehicle Front Axle Left, Front Axle Right
Paired article numbers AST8081
Apec AST8081 Wishbone / Control / Trailing Arm Bush
ONLY
£5.58
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Inner diameter 18 mm
Function Repair Kit, stabiliser coupling rod
Type Repair Kit, stabiliser coupling rod
Borg & Beck BSK7139K 2x Anti Roll Bar Bush (pair)
ONLY
£5.69
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Inner diameter 18 mm
Function Repair Kit, stabiliser coupling rod
Type Repair Kit, stabiliser coupling rod
First Line FSK7139K 2x Anti Roll Bar Bush (pair)
ONLY
£5.69
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Rear
Bearing/Mounting Type Rubber-Metal Mount
Steering arm type for control arm
Outer diameter 60 mm
Inner diameter 12.5 mm
Function Mounting, control/trailing arm
Width 41 mm
Type Mounting, control/trailing arm
FAG 829009310 Wishbone / Control / Trailing Arm Bush
ONLY
£5.78
Quantity:
Part number: 18358
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
for PR number: G15
Weight 0.1 kg
Placement on Vehicle Front Axle
Thickness 83 mm
Material PU (Polyurethane)
Function Rubber Buffer, suspension
Type Rubber Buffer, suspension
for OE number 357 412 303 F

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 18358 Bump Stop
ONLY
£6.14
Quantity:
Length 41 mm
Diameter 13 mm. 60 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Placement on Vehicle Rear, Lower, Front Axle Left, Front Axle Right
Paired article numbers NST8084
NAPA NST8084 Wishbone / Control / Trailing Arm Bush
ONLY
£6.17
Quantity:
Function Mounting, control/trailing arm
Placement on Vehicle Rear, Lower, Front Axle Left, Front Axle Right
Type Mounting, control/trailing arm
Diameter 13 mm. 60 mm
Length 41 mm
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Paired article numbers AST8084
Apec AST8084 Wishbone / Control / Trailing Arm Bush
ONLY
£6.22
Quantity:
Part number: 18365
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
for PR number: G08
Weight 0.09 kg
Thickness 63 mm
Material PU (Polyurethane)
Function Rubber Buffer, suspension
Placement on Vehicle Front Axle
Type Rubber Buffer, suspension

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 18365 Bump Stop
ONLY
£6.27
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Lower; Fitting Position: Rear
Inner diameter 13.1 mm
Diameter 60 mm
Length 41 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6053
Borg & Beck BSK6053 Wishbone / Control / Trailing Arm Bush
ONLY
£6.39
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Lower; Fitting Position: Rear
Length 41 mm
Inner diameter 13.1 mm
Diameter 60 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6053
First Line FSK6053 Wishbone / Control / Trailing Arm Bush
ONLY
£6.39
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front; Fitting Position: inner; Fitting Position: Left; Fitting Position: Right; Stabiliser Bar Diameter: 18 mm; for PR number: 0AS
Function Bushing, stabiliser bar
Thickness/Strength 1 35 mm
Inner diameter 1 18 mm
Type Bushing, stabiliser bar
Placement on Vehicle Front, inner, Left, Right
Delphi TD1049W 2x Anti Roll Bar Bush (pair)
ONLY
£6.63
Quantity:
Weight 0.08 kg
Placement on Vehicle Front Axle Left, Front Axle Right
Width 14 mm
Material Plastic
Outer diameter 45 mm
Inner diameter 14 mm
Bearing Type Angular Ball Bearing
Type Rolling Bearing, suspension strut support mount
Function Rolling Bearing, suspension strut support mount

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Blue Print ADG080331 Strut Anti Friction Bearing
ONLY
£6.81
Quantity:
Width 13.5 mm
Material Plastic
Outer diameter 45 mm
Inner diameter 14 mm
Bearing Type Angular Ball Bearing
Weight 0.08 kg
Placement on Vehicle Front Axle Left, Front Axle Right
Function Rolling Bearing, suspension strut support mount
Type Rolling Bearing, suspension strut support mount

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 01111 Strut Anti Friction Bearing
ONLY
£6.81
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: inner; Fitting Position: Lower; Fitting Position: Front
Replaces 5104703; 5104706; 5104709
Quantity Unit Piece
Bearing/Mounting Type Rubber-Metal Mount
Type Mounting, control/trailing arm
Function Mounting, control/trailing arm
Net weight 0.13 kg
NK 5104720 Wishbone / Control / Trailing Arm Bush
ONLY
£6.81
Quantity:
Part number: 19280
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
for combined PR number: G12+G16+G62
Weight 0.035 kg
Placement on Vehicle Front Axle
Thickness 53 mm
Material PU (Polyurethane)
Function Rubber Buffer, suspension
Type Rubber Buffer, suspension

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 19280 Bump Stop
ONLY
£6.91
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Inner diameter 18 mm
Bearing/Mounting Type Rubber Mount
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Placement on Vehicle Front Axle
Quinton Hazell EMB7246 Anti Roll Bar Bush
ONLY
£6.91
Quantity:

Page 1 of 3
Mountings & Bushes

What are mountings and bushes?

Mountings and bushes are components used to attach parts securely in your vehicle. Mountings and bushes are designed to keep their associated parts in place and in many cases provide shock absorption and articulation. There are many locations in a vehicle where mountings and bushes are used, especially where metal parts join together and require a rubber separation to prevent metal-on-metal damage.


How do I choose the correct mounting and bushes?

Finding the correct mounting and bushes is best done by cross referencing the original part number (OE). Although some of these parts look similar there can be subtle differences which may lead to them either not fitting correctly or failing prematurely. If you are not able to obtain and cross reference the OE part number here are some things to consider when looking for correct replacements:

  • Number of gears (i.e. 5 speed or 6 speed, manual, automatic etc)

  • Factory modifications (sports pack, levelling suspension, specific shape etc)

  • Transmission type / transmission code

  • Vehicle manufacture date (this is not the date the vehicle was registered but the date it was made)

  • Engine number sequence (up to or after as specific number/letter

  • VIN (chassis number) sequence (up to or after as specific number/letter

  • Standard, hydraulic or electric mounting

  • Diameter or other significant measure


What brand of mountings and bushes should I choose?

There are a number of brands available in the aftermarket. Some brands such as Bosch manufacture mountings and bushes for the original car brands however there are other high quality brands that meet or exceed the original specifications. Brands such as Blue Print, Delphi, Borg & Beck and Febi offer long warranties to take the worry out of choosing a quality part.


How can I tell my mountings or bushes needs replacing?

Often a visual check will show if the mounting or bushes need to be replaced. We always recommend you speak to a qualified mechanic if you are not sure. Some of the symptoms of a faulty mounting or bushes are:

  • There is a knocking noise when turning or going over bumps

  • The rubber has become split/damaged on the mounting or bush

  • There is loose play around the mounting or bush

  • There is fluid leaking from the mounting (hydraulic)

  • The mounting is corroded


Your feedback more
Trusted reviews more
Secure payments more
Simple returns more