Important compatibility info
Pipe Diameter | 12 mm |
Thread Length | 34 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 96 mm |
Outer diameter | 33.5 mm |
Inner diameter | 10 mm |
Rod/Strut | Coupling Rod |
Additional Information | with nuts |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,5 |
Weight | 0.42 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with screw |
Material | Steel |
Additional Information
Technical Information
The old bolt / nut must be replaced after every disassembly
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (29459)
- 1x Febi Screw (29460)
- 2x Febi Nut (22263)
Important compatibility info
Weight | 0.042 kg |
Type | Gasket, washer fluid pump/washer fluid reservoir |
Function | Gasket, washer fluid pump/washer fluid reservoir |
for OE number | 7M0 919 382 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.043 kg |
Outer diameter | 84.5 mm |
Function | Lid, manual transmission |
Extra Description | febi Plus |
Type | Lid, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Repair Kit, injector holder |
Function | Repair Kit, injector holder |
Weight | 0.043 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Kit, injector nozzle (40135)
- 1x Febi Screw (46272)
- 1x Febi Screw, injection nozzle holder (176311)
Important compatibility info
Material | Cast Aluminium |
Number of Teeth | 19 |
Number of grooves | 19 |
Number of Wings | 8 |
Function | Water Pump, engine cooling |
Seal Material | Rubber |
Weight | 0.717 kg |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Water pump impeller material | Metal |
Replaces | 18428; 24356; 30962; 32919 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.14 kg |
Material | Rubber |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Height | 205 mm |
Inner diameter | 48 mm |
Inner diameter 1 | 11 mm. 18 mm. 26 mm. 38 mm. 45 mm |
Inner diameter 2 | 36 mm. 44 mm. 50 mm. 57 mm |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PU (Polyurethane) |
Weight | 0.05 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thickness | 81 mm |
Inner diameter | 23 mm |
Function | Rubber Buffer, suspension |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Tightening Torque | 25 Nm |
Function | Cap, oil filter housing |
Outer diameter | 91 mm |
Weight | 0.125 kg |
Bolt Head/Nut Design | Male Hex |
Spanner Size | 32 |
Height | 62 mm |
Extra Description | febi Plus |
Type | Cap, oil filter housing |
Additional Information 2 | with seal ring |
Manufacturer's restriction oil filter housing | Mann + Hummel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 27 mm |
Outer diameter | 23 mm |
External Thread Size | M14 x 1,5 |
Weight | 0.062 kg |
Placement on Vehicle | Front Axle, Rear Axle |
Length | 48 mm |
Material | Steel |
Spanner Size | 17 |
Colour | Silver |
Surface | Zinc-coated |
Thread Length | 27 mm |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 8.8 |
Wheel Fastening | Ball seat A/G |
Function | Wheel Bolt |
Type | Wheel Bolt |
Rims | for light alloy rims, for steel rims |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.095 kg |
Placement on Vehicle | Rear Axle |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Length | 100 mm |
Type | Rubber Buffer, suspension |
Width | 58 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Function | Dust Cover Kit, shock absorber |
Length | 180 mm |
Width | 59 mm |
Type | Dust Cover Kit, shock absorber |
Weight | 0.242 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (22142)
- 2x Febi Rubber Buffer, suspension (174428)
Important compatibility info
Weight | 0.19 kg |
Placement on Vehicle | Rear Axle Left, Outer, Rear Axle Right |
Width | 45 mm |
Outer diameter | 40 mm |
Inner diameter | 14 mm |
Material | Rubber/Metal |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Screw length below head | 22 mm |
Function | Screw Plug, oil sump |
Bolt Head/Nut Design | Male Hex |
Surface | Zinc-coated |
Spanner Size | 19 |
Material | Steel |
Length | 30 mm |
Thread Length | 17.5 mm |
Type | Screw Plug, oil sump |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Quality/ Grade | 8.8 |
Type | Screw Plug, axle drive |
Function | Screw Plug, axle drive |
Screw length below head | 29 mm |
Diameter 1 | 16 mm |
Spanner Size | 8 |
Bolt Head/Nut Design | Hexagon Socket |
Weight | 0.03 kg |
Surface | Zink flake coated |
Material | Steel |
External Thread Size | M10 x 1,5 |
Additional Information | with gasket/seal |
Length | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 107 mm |
Outer diameter | 35 mm |
Spanner Size | 18 |
Thread Length | 41 mm |
Weight | 0.1 kg |
Type | Camber Correction Screw |
Function | Camber Correction Screw |
Screw length below head | 97 mm |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut (14392)
- 1x Febi Washer (177872)
- 1x Febi Camber Correction Screw (188574)
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 92.2 mm |
Outer diameter | 35 mm |
Spanner Size | 18 |
Weight | 0.136 kg |
Shaft Length | 32.8 mm |
Type | Camber Correction Screw |
Function | Camber Correction Screw |
Screw length below head | 81 mm |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Nut (14392)
- 1x Febi Washer (177872)
- 1x Febi Camber Correction Screw (188575)
Important compatibility info
Function | Mounting, radiator |
Length | 54 mm |
Weight | 0.024 kg |
Width | 46 mm |
Thickness | 18 mm |
Extra Description | febi Plus |
Type | Mounting, radiator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Black |
Extra Description | febi Plus |
Number of Connectors / Ports | 3 |
Function | Switch, window regulator |
Switch Lighting | Red |
Control Type | Rocker Actuation |
Weight | 0.01 kg |
Type | Switch, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.7 kg |
Material | Sheet Steel |
Steering arm type | Control Arm |
Additional Information 2 | with bearing |
Placement on Vehicle | Rear Axle Left, Lower, Rear, Rear Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 311 mm |
External Thread Size | M16 x 1,5 |
Weight | 0.748 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with counter nut |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023