Important compatibility info
Function | Mounting, stabiliser bar |
Placement on Vehicle | Rear Axle |
Weight | 0.037 kg |
Type | Mounting, stabiliser bar |
Inner diameter | 16.2 mm |
Thickness | 30 mm |
Material | Rubber |
Width | 30 mm |
Length | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 250 mm |
Number of Connectors / Ports | 3 |
Function | Sensor, crankshaft pulse |
Weight | 0.060 kg |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Stabiliser Diameter | 21 mm |
Length | 1075 mm |
Placement on Vehicle | Front Axle |
Function | Stabiliser Bar, suspension |
Weight | 4.55 kg |
Additional Information | with rubber mounts |
Extra Description | ProKit |
Type | Stabiliser Bar, suspension |
Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (36651)
- 1x Febi Repair Kit, stabiliser bush (36757)
Important compatibility info
Weight | 0.236 kg |
for OE number | 1J0 721 261 F |
Bore Diameter | 6.05 mm |
Fill Medium | Brake Fluid |
Type | Slave Cylinder, clutch |
Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Teeth | 150 |
Function | Water Pump & Timing Belt Kit |
Weight | 1.87 kg |
Type | Water Pump & Timing Belt Kit |
for OE number | 06B 109 119 A S7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (27298)
- 1x Febi Water Pump, engine cooling (15900)
Important compatibility info
Weight | 0.29 kg |
Length | 115 mm |
Material | Thermoplast |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 97 mm |
Function | Bellow Kit, drive shaft |
Additional Information | with grease |
Additional Information 2 | with clamps, with nut |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45645)
Important compatibility info
Rated Power | 40 W |
Voltage | 12 V |
Placement on Vehicle | Front |
Weight | 1.05 kg |
Function | Wiper Motor |
Type | Wiper Motor |
Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.58 kg |
Placement on Vehicle | Front Axle |
Length | 146 mm |
Width | 55 mm |
Additional Information 2 | with piston clip, with anti-squeak plate |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.6 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Replaces | 16332; 16617; 16618 |
Brake System | ATE |
Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.350 kg |
Placement on Vehicle | Front Axle Right, Lower |
Paired article numbers | 12658 |
External Thread Size | M12 x 1,5 |
Function | Ball Joint |
Cone Size | 15 mm |
Mounting points diameter | 8.1 mm |
Additional Information | with lock nut |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.500 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 19820 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (11091)
- 1x Febi Securing Plate, ball joint (14238)
- 1x Febi Ball Joint (12660)
- 3x Febi Clamping Bolt, ball joint (07866)
Important compatibility info
Weight | 0.045 kg |
Function | Chain Tensioner, oil pump drive |
Type | Chain Tensioner, oil pump drive |
for OE number | 06A 115 130 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Material | ACM (Polyacrylate) |
Outer diameter | 35 mm |
Thickness | 7 mm |
Inner diameter | 21.8 mm |
Type | Shaft Seal, manual transmission |
Function | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper |
Outer diameter | 38 mm |
Inner diameter | 30 mm |
Function | Radiator Hose |
Weight | 0.36 kg |
Additional Information | with quick coupling |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Brake caliper piston diameter | 54 mm |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179158 |
Weight | 2.950 kg |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.25 kg |
Material | Thermoplast |
Function | Bellow Kit, drive shaft |
Inner diameter 2 | 87 mm |
Inner diameter 1 | 26 mm |
Length | 115 mm |
Type | Bellow Kit, drive shaft |
Replaces | 44403 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (44402)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38757)
- 1x Febi Spring Washer (07254)
- 1x Febi Circlip (03185)
- 1x Febi High Temperature Lubricant (03630)
- 1x Febi Spacer Sleeve (03385)
Important compatibility info
Weight | 0.042 kg |
Type | Gasket, washer fluid pump/washer fluid reservoir |
Function | Gasket, washer fluid pump/washer fluid reservoir |
for OE number | 7M0 919 382 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.140 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.88 kg |
Width | 102 mm |
Function | Stub Axle, axle beam |
Height | 87 mm |
Type | Stub Axle, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.315 kg |
Number of Connectors / Ports | 2 |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 1J0 121 403 B |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 19.7 mm |
Inner diameter | 13 mm |
Function | Seal, oil cooler (automatic transmission) |
Weight | 0.005 kg |
Type | Seal, oil cooler (automatic transmission) |
Material | NBR (nitrile butadiene rubber) |
Thickness | 3.41 mm |
Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023