Important compatibility info
Type | Mounting, engine |
Function | Mounting, engine |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
for OE number | 1J0 199 555 BB |
Weight | 1.900 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.025 kg |
Length | 59.2 mm |
Inner diameter | 29 mm |
Function | Coolant Flange |
Additional Information | with quick coupling |
Type | Coolant Flange |
for OE number | 3B0 122 291 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 63 mm |
Outer diameter | 120 mm |
Inner diameter | 30 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 100 mm |
Function | Wheel Bearing Kit |
Weight | 2.00 kg |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (09521)
- 1x Febi Nut (24230)
- 1x Febi Cap, wheel bearing (24232)
Important compatibility info
Weight | 0.16 kg |
Inner diameter | 85 mm |
Thickness | 15.7 mm |
Outer diameter | 131 mm. 152 mm |
Material | PTFE (polytetrafluoroethylene) |
Placement on Vehicle | transmission sided |
Function | Shaft Seal, crankshaft |
Type | Shaft Seal, crankshaft |
Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.152 kg |
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
for OE number | 1J0 721 261 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Number of Ribs | 5 |
Inner diameter | 30 mm |
Thickness | 29 mm |
Outer diameter | 143 mm |
Weight | 1.76 kg |
Type | Belt Pulley, crankshaft |
for OE number | 06A 105 243 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.26 kg |
Additional Information 2 | with cap |
Function | Equalising reservoir, hydraulic oil (power steering) |
Type | Equalising reservoir, hydraulic oil (power steering) |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.29 kg |
Length | 115 mm |
Material | Thermoplast |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 97 mm |
Function | Bellow Kit, drive shaft |
Additional Information | with grease |
Additional Information 2 | with clamps, with nut |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Nut, kingpin (08023)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45645)
Important compatibility info
Rated Power | 40 W |
Voltage | 12 V |
Placement on Vehicle | Front |
Weight | 1.05 kg |
Function | Wiper Motor |
Type | Wiper Motor |
Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.58 kg |
Placement on Vehicle | Front Axle |
Length | 146 mm |
Width | 55 mm |
Additional Information 2 | with piston clip, with anti-squeak plate |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 18.6 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Replaces | 16332; 16617; 16618 |
Brake System | ATE |
Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.350 kg |
Placement on Vehicle | Front Axle Right, Lower |
Paired article numbers | 12658 |
External Thread Size | M12 x 1,5 |
Function | Ball Joint |
Cone Size | 15 mm |
Mounting points diameter | 8.1 mm |
Additional Information | with lock nut |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.500 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 19820 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
Technical Information
Please tighten the mounting bolts with the wheels on the ground.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (11091)
- 1x Febi Securing Plate, ball joint (14238)
- 1x Febi Ball Joint (12660)
- 3x Febi Clamping Bolt, ball joint (07866)
Important compatibility info
Weight | 0.045 kg |
Function | Chain Tensioner, oil pump drive |
Type | Chain Tensioner, oil pump drive |
for OE number | 06A 115 130 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Material | ACM (Polyacrylate) |
Outer diameter | 35 mm |
Thickness | 7 mm |
Inner diameter | 21.8 mm |
Type | Shaft Seal, manual transmission |
Function | Shaft Seal, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper |
Outer diameter | 38 mm |
Inner diameter | 30 mm |
Function | Radiator Hose |
Weight | 0.36 kg |
Additional Information | with quick coupling |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178932 |
Weight | 1.368 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.015 kg |
Colour | Blue |
Material | PP (Polypropylene) |
Function | Sealing Cap, washer fluid reservoir |
Extra Description | febi Plus |
Type | Sealing Cap, washer fluid reservoir |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 1J0 919 149 A |
Function | Sensor, speed |
Number of Connectors / Ports | 3 |
Weight | 0.038 kg |
Type | Sensor, speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 338 mm |
External Thread Size | M14 x 1,5, M16 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Weight | 0.2 kg |
Additional Information | with counter nut |
Extra Description | ProKit |
Type | Inner Tie Rod |
for OE number | 1J0 422 810 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 27 mm |
Weight | 0.062 kg |
Material | Metal |
Outer diameter | 28.5 mm |
Inner diameter | 10 mm |
Function | Deflection Pulley/Guide Pulley, timing belt |
Additional Information 2 | with screw |
Type | Deflection Pulley/Guide Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023