Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 96 mm |
| Material | Plastic |
| Outer diameter | 80 mm |
| Inner diameter | 73 mm |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Weight | 0.18 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.15
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.040 kg |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.20
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 148 |
| Timing Chain Size | G53RT, G53RING-1, G53RING-2 |
| Function | Timing Chain |
| Weight | 0.480 kg |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.20
Important compatibility info
| Housing Type | with housing |
| Weight | 0.221 kg |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.24
Important compatibility info
| Filter type | with filter heating, with water separator |
| Function | Housing, fuel filter |
| Weight | 1.918 kg |
| Number of Connectors / Ports | 2 |
| Type | Housing, fuel filter |
| Internal Thread Size | M16 x 1,5 |
| Additional Information 2 | with filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.25
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 28 mm |
| Inner diameter | 50 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 96 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Extra Description | ProKit |
| for OE number | 26 11 1 229 360 S2 |
| Additional Information 2 | with bolts/screws |
| Type | Joint, propshaft |
| Weight | 0.92 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (09203)
- 1x Febi Assembly Kit, propshaft joint (43432)
£92.25
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Weight | 3.64 kg |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.28
Important compatibility info
| Weight | 0.304 kg |
| Type | Rotor Set, oil pump |
| Function | Rotor Set, oil pump |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.30
Important compatibility info
| Weight | 3.472 kg |
| Type | Parts Set, maintenance service |
| Function | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (35395)
- 1x Febi Fuel filter (171330)
- 1x Febi Air Filter (40548)
- 1x Febi Filter, cabin air (23581)
- 1x Febi Air Filter, compressor intake (38976)
£92.31
Important compatibility info
| Weight | 1.847 kg |
| Length | 300 mm |
| Width | 160 mm |
| Thickness | 195 mm |
| Voltage | 24 V |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.31
Important compatibility info
| Placement on Vehicle | Exhaust Side, Intake Side |
| Operating Mode | Mechanical |
| Weight | 0.424 kg |
| Type | Tappet |
| Function | Tappet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.33
Important compatibility info
| Additional Information | with fuel sender unit |
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Weight | 1.17 kg |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.33
Important compatibility info
| Width | 26 mm |
| Number of Teeth | 122 |
| Surface | Coated |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Weight | 2.481 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (24766)
- 1x Febi Water Pump, engine cooling (22206)
£92.39
Important compatibility info
| Weight | 6.8 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 40426 |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.39
Important compatibility info
| Weight | 0.177 kg |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| for OE number | 23796-AU00D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.40
Important compatibility info
| Weight | 1.0 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 186662 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.43
Important compatibility info
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Core Length | 481 mm |
| Function | Condenser, air conditioning |
| Weight | 2.683 kg |
| Additional Information 2 | with dryer |
| Core Depth | 16 mm |
| Core Width | 610 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.47
Important compatibility info
| Weight | 4.16 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 618 mm |
| Min. Length | 385 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.52
Important compatibility info
| Weight | 0.861 kg |
| Outer diameter | 180 mm |
| Bolt Hole Circle Diameter | 147 mm |
| Parameter | VL121R |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.52
Important compatibility info
| Weight | 0.019 kg |
| Number of Connectors / Ports | 4 |
| for OE number | 89421-47010 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.58
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 10.67 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 324 mm |
| Thickness | 73.7 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.60
Important compatibility info
| Height | 150 mm |
| Outer diameter | 95 mm |
| Filter type | with connection for water sensor, In-Line Filter, with filter heating |
| Weight | 0.570 kg |
| Pipe Diameter | 10 mm |
| Type | Fuel filter |
| Housing material | Metal |
| Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.60
Important compatibility info
| Rotor Style | Solid |
| Weight | 5.11 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 249 mm |
| Thickness | 67.2 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.4 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Additional Information 2 | with ABS sensor ring, with grease cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.60
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| Weight | 9.424 kg |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Teeth, Wheel Side | 40 |
| External Teeth, Diff.Side | 28 |
| Min. Length | 944 mm |
| Wheel Sided Joint Diameter | 92.2 mm |
| Transmission-side joint diameter | 91 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.61
Important compatibility info
| Min. Length | 255 mm |
| Piston conrod diameter | 28 mm |
| Max. Length | 437 mm |
| Bore Diameter | 15 mm |
| Pipe Diameter | 58 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 90 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Shock Absorber System | Twin-Tube |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Weight | 4.907 kg |
| Shock Absorber Type | Gas Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.64
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 10.6 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 83.4 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 150 mm |
| Centering Diameter | 112 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.64
Important compatibility info
| Weight | 8.85 kg |
| Placement on Vehicle | Rear Axle |
| Width | 53.6 mm |
| Outer diameter | 290 mm |
| Thickness | 84.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 50.2 mm |
| Max.skimmed drum measure | 231.5 mm |
| Inner Brake Drum Diameter | 230 mm |
| Function | Brake Drum |
| Rim Hole Number | 4 -Hole |
| Type | Brake Drum |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.64
Important compatibility info
| Placement on Vehicle | Rear, Lower, Front Axle Right |
| Additional Information | with rubber mounts, with lock nut |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 186263 |
| Weight | 3.100 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 27.7 mm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.69
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut, with bolts/screws |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 86.36 mm |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 6.558 kg |
| Min. Length | 771 mm |
| Wheel Sided Joint Diameter | 89.5 mm |
| Transmission-side joint diameter | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.74
Important compatibility info
| Weight | 4.890 kg |
| Placement on Vehicle | Rear |
| Inner diameter | 15 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Replaces | 38320 |
| Internal Thread Size | M20 x 2,5 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.74
Important compatibility info
| External Thread Size | M16 x 1,5, M16 x 2 |
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 260 mm |
| Additional Information | with piston |
| Outer diameter | 228 mm. 170 mm |
| Thickness | 137 mm |
| Weight | 5.94 kg |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.75
Important compatibility info
| Weight | 4.800 kg |
| Outer diameter | 193 mm |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Number of Ribs | 5 |
| Inner diameter | 18 mm |
| Thickness | 37.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.77
Important compatibility info
| Weight | 1.148 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 1 152 021 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.79
Important compatibility info
| Weight | 0.393 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 154 |
| Function | Timing Chain |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.81
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 0.8 kW |
| Weight | 2.9 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.81
Important compatibility info
| Weight | 0.70 kg |
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 66 |
| Timing Chain Size | G67AM, G67HP, G67HR |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29858)
- 1x Febi Tensioner, timing chain (21291)
- 1x Febi Guide, timing chain (24952)
- 1x Febi Guide, timing chain (24898)
£92.84
Important compatibility info
| Weight | 0.07 kg |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Cone Size | 32 mm |
| Outer diameter | 42 mm |
| Length | 1095 mm |
| External Thread Size | M27 x 1,5 |
| Weight | 9.36 kg |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Centre Rod Assembly (28274)
- 2x Febi Nut (26529)
£92.85
Important compatibility info
| Weight | 0.42 kg |
| Outer diameter | 32 mm |
| Opening Temperature | 80 °C. 89 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| for OE number | 11 74 7 626 350 |
| Operating Mode | Electric-pneumatic |
| Function | Pressure converter, turbocharger |
| Extra Description | febi Plus |
| Type | Pressure converter, turbocharger |
| Weight | 0.136 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Length | 170 mm |
| Height | 80 mm |
| Width | 180 mm |
| Inspection Tag | ADR |
| Number of Connectors / Ports | 14 |
| Weight | 0.59 kg |
| Protection Type (IP Code) | IP54 |
| Type | Cable Junction Box |
| Function | Cable Junction Box |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.7 kW |
| Weight | 3.8 kg |
| for OE number | 0AH 911 023 BX |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Weight | 1.431 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (176599)
- 1x Febi Water Pump, engine cooling (22206)
£92.85
Important compatibility info
| External Teeth, Diff.Side | 28 |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Min. Length | 592 mm |
| Weight | 6.768 kg |
| Transmission-side joint diameter | 86 mm |
| Wheel Sided Joint Diameter | 92.2 mm |
| Function | Drive Shaft |
| Thread Size | M10x1,5 |
| Additional Information 2 | with screw |
| External Teeth, Wheel Side | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Placement on Vehicle | Right |
| Function | Front Cover Lock |
| Weight | 0.53 kg |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Outer diameter | 75 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Weight | 1.62 kg |
| Width of castor bearing surface | 37 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 0.460 kg |
| Material | FPM (fluoride rubber), MVQ (silicone rubber) |
| Outer diameter | 98 mm |
| Inner diameter | 90 mm |
| Colour | Red |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Hose Length | 282 mm |
| Wall Thickness | 4 mm |
| for OE number | 81.96301.0900 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Extra Description | Basic Short Kit |
| Weight | 0.599 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 124 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (180927)
- 1x Febi Tensioner, timing chain (179775)
- 1x Febi Guide, timing chain (178681)
- 1x Febi Guide, timing chain (180603)
£92.85
Important compatibility info
| Weight | 0.072 kg |
| Placement on Vehicle | after soot particulate filter |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| for OE number | 070 906 088 AF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 0.280 kg |
| Length | 205 mm |
| Width | 145 mm |
| Thickness | 68 mm |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023