Mountings & Bushes Mountings & Bushes
Fits OPEL ASTRA G Hatchback (T98) 1.6 16V (F08, F48)
(1998)

Part number: 819002610
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: inner; Vehicle Identification Number (VIN) from: Y...
Function Mounting, stabiliser bar
Placement on Vehicle Front Axle, inner
Bearing/Mounting Type Rubber Mount
Inner diameter 18 mm
Type Mounting, stabiliser bar
FAG 819002610 Anti Roll Bar Bush
ONLY
£4.26
Quantity:
Part number: 17730
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: X 16 XEL; Engine Code: Z 16 XE
Material Rubber
Inner diameter 18 mm
Placement on Vehicle Front Axle
Weight 0.033 kg
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 17730 Anti Roll Bar Bush
ONLY
£4.82
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: X 16 XEL; Engine Code: Z 16 XE
Weight 0.132 kg
Material Rubber/Metal
Outer diameter 36 mm. 43 mm
Thickness 60 mm
Inner diameter 12 mm
Replaces 02070
Placement on Vehicle Front Axle Left, Lower, Front, Front Axle Right
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 11662 Wishbone / Control / Trailing Arm Bush
ONLY
£5.63
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Function Repair Kit, stabiliser coupling rod
Inner diameter 18 mm
Type Repair Kit, stabiliser coupling rod
Borg & Beck BSK6225K 2x Anti Roll Bar Bush (pair)
ONLY
£5.87
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: inner; Fitting Position: in front of axle; Fitting Position: Lower; for model code: F08; or; Fitting Position: Front Axle; Fitting Position: Lower; Fitting Position: Front
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Delphi TD332W Wishbone / Control / Trailing Arm Bush
ONLY
£5.87
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front; Fitting Position: Left; Fitting Position: Right; Diameter: 20 mm
Thickness/Strength 1 39.5 mm
Inner diameter 1 18 mm
Outer diameter 1 32 mm
Function Bushing, stabiliser bar
Type Bushing, stabiliser bar
Delphi TD540W 2x Anti Roll Bar Bush (pair)
ONLY
£5.89
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Front
Inner diameter 12.2 mm
Diameter 37.5 mm
Length 59.5 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6025
Replaces BSK6005
Borg & Beck BSK6025 Wishbone / Control / Trailing Arm Bush
ONLY
£5.95
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Front
Length 59.5 mm
Inner diameter 12.2 mm
Diameter 37.5 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6025
Replaces FSK6005
First Line FSK6025 Wishbone / Control / Trailing Arm Bush
ONLY
£5.95
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Replaces 713000320
Type Rolling Bearing, suspension strut support mount
Placement on Vehicle Front Axle
Function Rolling Bearing, suspension strut support mount
FAG 713001920 Strut Anti Friction Bearing
ONLY
£6.49
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Inner diameter 18 mm
Function Repair Kit, stabiliser coupling rod
Type Repair Kit, stabiliser coupling rod
First Line FSK6225K 2x Anti Roll Bar Bush (pair)
ONLY
£6.66
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Bearing/Mounting Type Rubber Mount
Inner diameter 16 mm
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Quinton Hazell EMB7110 Anti Roll Bar Bush
ONLY
£6.69
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Bearing/Mounting Type Rubber Mount
Inner diameter 18 mm
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Quinton Hazell EMB7112 Anti Roll Bar Bush
ONLY
£6.69
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle
Inner diameter 20 mm
Bearing/Mounting Type Rubber Mount
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Placement on Vehicle Front Axle
Quinton Hazell EMB7248 Anti Roll Bar Bush
ONLY
£6.94
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Rear
Inner diameter 12.1 mm
Diameter 47.2 mm
Length 59.7 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6026
Replaces BSK6006
Borg & Beck BSK6026 Wishbone / Control / Trailing Arm Bush
ONLY
£7.07
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: outer
Bearing/Mounting Type Rubber Mount
Inner diameter 17 mm
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar
Quinton Hazell EMB7131 Anti Roll Bar Bush
ONLY
£7.27
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: X 16 XEL; Engine Code: Z 16 XE
Weight 0.133 kg
Inner diameter 12 mm
Outer diameter 61 mm. 47 mm
Thickness 60 mm
Material Aluminium, Rubber/Metal
Placement on Vehicle Front Axle Left, Lower, Rear, Front Axle Right
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 11663 Wishbone / Control / Trailing Arm Bush
ONLY
£7.32
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Rear
Placement on Vehicle Front Axle, Left, Right, Rear
Function Bushing, axle cross member
Type Bushing, axle cross member
Borg & Beck BSK7874 Axle Beam Mount
ONLY
£7.59
Quantity:
Part number: FSK7874
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: Rear
Placement on Vehicle Front Axle, Left, Right, Rear
Function Bushing, axle cross member
Type Bushing, axle cross member
First Line FSK7874 Axle Beam Mount
ONLY
£7.59
Quantity:
Part number: 30970
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: X 16 XEL; Engine Code: Z 16 XE; Vehicle Identification Number (VIN) to: *********3*999999; Fitting Position: Front Axle
Length 35 mm
Material Rubber
Outer diameter 46 mm
Inner diameter 14 mm
Weight 0.114 kg
Function Bushing, axle beam
Type Bushing, axle beam

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 30970 Axle Beam Mount
ONLY
£7.71
Quantity:
Function Mounting, support frame/subframe
Type Mounting, support frame/subframe
Placement on Vehicle Rear, Front Axle Left, Front Axle Right
Paired article numbers NST8180
NAPA NST8180 Wishbone / Control / Trailing Arm Bush
ONLY
£7.75
Quantity:
Manufacturer OPEL VAUXHALL
Model ASTRA ZAFIRA
Type Mounting, support frame/subframe
Function Mounting, support frame/subframe
Placement on Vehicle Rear, Front Axle Left, Front Axle Right
Apec AST8180 Wishbone / Control / Trailing Arm Bush
ONLY
£7.83
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Centre; Fitting Position: Left; Fitting Position: Right; Fitting Position: Front
Function Bushing, axle cross member
Type Bushing, axle cross member
Borg & Beck BSK7165 Axle Beam Mount
ONLY
£7.95
Quantity:
Part number: FSK7165
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Centre; Fitting Position: Left; Fitting Position: Right; Fitting Position: Front
Function Bushing, axle cross member
Type Bushing, axle cross member
First Line FSK7165 Axle Beam Mount
ONLY
£7.95
Quantity:
Part number: 814006410
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Upper; Mounting Type: soft version
Function Suspension Strut Support Mount
Type Suspension Strut Support Mount
Placement on Vehicle Front Axle, Upper
FAG 814006410 Top Strut Mounting
ONLY
£8.23
Quantity:
Part number: 08157
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: X 16 XEL; Engine Code: Z 16 XE; Suspension: for vehicles without lowered suspension
Weight 0.43 kg
Material Rubber/Metal
Outer diameter 103 mm. 113 mm
Inner diameter 12 mm
Bearing/Mounting Type Soft Version
Placement on Vehicle Front Axle
Function Suspension Strut Support Mount
Type Suspension Strut Support Mount
Height 40 mm
Additional Information 2 without ball bearing

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 08157 Top Strut Mounting
ONLY
£8.37
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: X 16 XEL; Engine Code: Z 16 XE
Placement on Vehicle Front Axle Left, Front Axle Right
Weight 0.047 kg
Bearing Type Rolling Bearing
Type Rolling Bearing, suspension strut support mount
Function Rolling Bearing, suspension strut support mount

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 02132 Strut Anti Friction Bearing
ONLY
£8.49
Quantity:
Part number: TD1798W
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Rear; Fitting Position: inner
Width 1 14 mm
Inner diameter 1 38 mm
Outer diameter 1 35 mm
Type Bushing, axle beam
Function Bushing, axle beam
Placement on Vehicle Front Axle, Rear, inner
Delphi TD1798W Axle Beam Mount
ONLY
£8.58
Quantity:
Part number: 814002510
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Lower
Placement on Vehicle Front Axle, Lower
Additional Information 2 with rolling bearing
Type Suspension Strut Support Mount
Function Suspension Strut Support Mount
FAG 814002510 Top Strut Mounting
ONLY
£8.97
Quantity:
Part number: 12441
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Suspension: for vehicles without sports suspension
Placement on Vehicle Front Axle
Outer diameter 50 mm
Thickness 63 mm
Inner diameter 24 mm
Material PU (Polyurethane)
Function Rubber Buffer, suspension
Weight 0.041 kg
Type Rubber Buffer, suspension
Width 50 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 12441 Bump Stop
ONLY
£9.05
Quantity:
Part number: TD1330W
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: inner; Fitting Position: Front Axle; Fitting Position: Front; Fitting Position: Rear
Inner diameter 1 14 mm
Outer diameter 1 39 mm
Width 1 35 mm
Placement on Vehicle inner, Front Axle, Front, Rear
Type Bushing, axle beam
Function Bushing, axle beam
Delphi TD1330W Axle Beam Mount
ONLY
£9.28
Quantity:

Page 1 of 3
Mountings & Bushes

What are mountings and bushes?

Mountings and bushes are components used to attach parts securely in your vehicle. Mountings and bushes are designed to keep their associated parts in place and in many cases provide shock absorption and articulation. There are many locations in a vehicle where mountings and bushes are used, especially where metal parts join together and require a rubber separation to prevent metal-on-metal damage.


How do I choose the correct mounting and bushes?

Finding the correct mounting and bushes is best done by cross referencing the original part number (OE). Although some of these parts look similar there can be subtle differences which may lead to them either not fitting correctly or failing prematurely. If you are not able to obtain and cross reference the OE part number here are some things to consider when looking for correct replacements:

  • Number of gears (i.e. 5 speed or 6 speed, manual, automatic etc)

  • Factory modifications (sports pack, levelling suspension, specific shape etc)

  • Transmission type / transmission code

  • Vehicle manufacture date (this is not the date the vehicle was registered but the date it was made)

  • Engine number sequence (up to or after as specific number/letter

  • VIN (chassis number) sequence (up to or after as specific number/letter

  • Standard, hydraulic or electric mounting

  • Diameter or other significant measure


What brand of mountings and bushes should I choose?

There are a number of brands available in the aftermarket. Some brands such as Bosch manufacture mountings and bushes for the original car brands however there are other high quality brands that meet or exceed the original specifications. Brands such as Blue Print, Delphi, Borg & Beck and Febi offer long warranties to take the worry out of choosing a quality part.


How can I tell my mountings or bushes needs replacing?

Often a visual check will show if the mounting or bushes need to be replaced. We always recommend you speak to a qualified mechanic if you are not sure. Some of the symptoms of a faulty mounting or bushes are:

  • There is a knocking noise when turning or going over bumps

  • The rubber has become split/damaged on the mounting or bush

  • There is loose play around the mounting or bush

  • There is fluid leaking from the mounting (hydraulic)

  • The mounting is corroded


Your feedback more
Trusted reviews more
Secure payments more
Simple returns more