Mountings & Bushes Mountings & Bushes
Fits VW JETTA III (1K2) 2.0 TDI
(2005)

Weight 0.006 kg
Material Steel
for OE number 1J0 145 769 F
Type Fastening Clamp, charge air hose
Function Fastening Clamp, charge air hose

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 49786 Clamp, charge air hose
ONLY
£4.28
Quantity:
Function Fastening Clamp, charge air hose
Material Steel
Thickness 71 mm
Weight 0.007 kg
Type Fastening Clamp, charge air hose

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 49755 Clamp, charge air hose
ONLY
£5.29
Quantity:
Placement on Vehicle Rear Axle Left, Upper, inner, Rear Axle Right
Material Rubber/Metal
Outer diameter 38 mm. 24 mm
Thickness 45 mm
Inner diameter 12 mm
Bearing/Mounting Type Rubber-Metal Mount
Function Mounting, control/trailing arm
Weight 0.071 kg
Type Mounting, control/trailing arm

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 29689 Wishbone / Control / Trailing Arm Bush
ONLY
£5.77
Quantity:
Part number: 29938
Outer diameter 37.8 mm
Thickness 50 mm
Inner diameter 12 mm
Bearing/Mounting Type Rubber-Metal Mount
Weight 0.124 kg
Placement on Vehicle Rear Axle Left, Outer, Lower, Rear Axle Right
Material Rubber/Metal
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Replaces 23958

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 29938 Axle Beam Mount
ONLY
£5.94
Quantity:
Part number: 23458
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Vehicle Identification Number (VIN): AAV**************; Vehicle Identification Number (VIN): WVW**************; Suspension: for vehicles with sports suspension; for PR number: G56
Placement on Vehicle Front Axle
Thickness 55 mm
Inner diameter 26 mm. 20 mm
Weight 0.047 kg
Material PU (Polyurethane)
Function Rubber Buffer, suspension
Type Rubber Buffer, suspension

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 23458 Bump Stop
ONLY
£6.00
Quantity:
Weight 0.125 kg
Placement on Vehicle Rear Axle Left, Upper, Outer, Rear Axle Right
Material Rubber/Metal
Outer diameter 38.3 mm. 24 mm
Thickness 45 mm
Inner diameter 15 mm
Bearing/Mounting Type Rubber-Metal Mount
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 29682 Wishbone / Control / Trailing Arm Bush
ONLY
£6.34
Quantity:
Replaces 22954
Weight 0.106 kg
Placement on Vehicle Lower, Front Axle Left, Rear, Front Axle Right
Material Rubber/Metal
Outer diameter 63 mm. 71 mm
Thickness 51 mm
Inner diameter 19 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 31253 Wishbone / Control / Trailing Arm Bush
ONLY
£6.35
Quantity:
Diameter 12 mm. 42 mm
Length 60 mm
Type Mounting, control/trailing arm
Function Mounting, control/trailing arm
Placement on Vehicle outer, Rear Axle Left, Rear Axle Right, Lower
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Paired article numbers AST8133
Apec AST8133 Wishbone / Control / Trailing Arm Bush
ONLY
£6.46
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: inner; Fitting Position: Lower
Inner diameter 12.1 mm
Diameter 42.4 mm
Length 60 mm
Only in connection with FCA6889
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK7194
Placement on Vehicle Rear Axle, Left, Right, inner, Lower
Borg & Beck BSK7194 Wishbone / Control / Trailing Arm Bush
ONLY
£6.67
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: inner; Fitting Position: Lower
Length 60 mm
Inner diameter 12.1 mm
Diameter 42.4 mm
Function Mounting, control/trailing arm
Only in connection with FCA6889
Placement on Vehicle Rear Axle, Left, Right, inner, Lower
Type Mounting, control/trailing arm
Paired article numbers FSK7194
First Line FSK7194 Wishbone / Control / Trailing Arm Bush
ONLY
£6.67
Quantity:
Part number: 29568
Material Rubber/Metal
Outer diameter 61.5 mm. 59 mm
Inner diameter 12 mm
Shape/Form Oval
Placement on Vehicle Rear Axle Left, Front, Rear Axle Right
Weight 0.16 kg
Thickness 64 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 29568 Axle Beam Mount
ONLY
£6.71
Quantity:
Outer diameter 48 mm. 28 mm
Thickness 54 mm
Inner diameter 12 mm
Weight 0.183 kg
Placement on Vehicle Front Axle Left, Lower, Front, Front Axle Right
Material Rubber/Metal
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Replaces 38404

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 24390 Wishbone / Control / Trailing Arm Bush
ONLY
£6.72
Quantity:
Part number: 23356
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Stabiliser Bar Diameter: 19 mm; for PR number: 0BH
Weight 0.070 kg
Placement on Vehicle Rear Axle
Inner diameter 15 mm
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 23356 Anti Roll Bar Bush
ONLY
£6.75
Quantity:
Part number: 32073
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Stabiliser Bar Diameter: 20 mm; for PR number: 0BJ
Inner diameter 17 mm
Weight 0.07 kg
Placement on Vehicle Rear Axle
Material Rubber
Function Mounting, stabiliser bar
Type Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 32073 Anti Roll Bar Bush
ONLY
£6.75
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Stabiliser Bar Diameter: 19 mm; for PR number: 0BH
Weight 0.021 kg
Placement on Vehicle Rear Axle
Type Mounting, stabiliser bar
Function Mounting, stabiliser bar
Inner diameter 15 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Blue Print ADV188001 Anti Roll Bar Bush
ONLY
£6.76
Quantity:
Part number: 23590
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Vehicle Identification Number (VIN): AAV**************; Vehicle Identification Number (VIN): WVW**************; or; for combined PR number: G57+2UC; or; for combined PR number: G68+2UC; or; Suspension: for vehicles with sports suspension
Weight 0.038 kg
Placement on Vehicle Front Axle
Thickness 55 mm
Inner diameter 30 mm. 23 mm
Material PU (Polyurethane)
Function Rubber Buffer, suspension
Type Rubber Buffer, suspension

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 23590 Bump Stop
ONLY
£6.83
Quantity:
Weight 0.098 kg
Placement on Vehicle Rear Axle Left, Lower, Rear Axle Right
Outer diameter 42 mm. 25 mm
Thickness 60 mm
Inner diameter 12 mm
Material Rubber/Metal
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm

Additional Information

Technical Information

Please tighten the mounting bolts with the wheels on the ground.


General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 29690 Wishbone / Control / Trailing Arm Bush
ONLY
£7.05
Quantity:
Part number: 23460
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Vehicle Identification Number (VIN): AAV**************; Vehicle Identification Number (VIN): WVW**************; Suspension: for vehicles with standard suspension; for combined PR number: 2UA+2UD+2UE; or; Vehicle Identification Number (VIN): 3VW**************
Placement on Vehicle Front Axle
Thickness 70 mm
Inner diameter 28 mm
Inner diameter 1 23 mm
Weight 0.045 kg
Material PU (Polyurethane)
Function Rubber Buffer, suspension
Type Rubber Buffer, suspension

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 23460 Bump Stop
ONLY
£7.08
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: both sides
Steering arm type for control arm
Bearing/Mounting Type Rubber-Metal Mount
Type Mounting, control/trailing arm
Function Mounting, control/trailing arm
FAG 829034810 Wishbone / Control / Trailing Arm Bush
ONLY
£7.11
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Front
Function Mounting, control/trailing arm
Placement on Vehicle Front Axle, Front
Steering arm type for control arm
Bearing/Mounting Type Rubber-Metal Mount
Type Mounting, control/trailing arm
FAG 829010610 Wishbone / Control / Trailing Arm Bush
ONLY
£7.75
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: outer; Vehicle Identification Number (VIN) from: 1K-9-091 376.; Also fits:- ;Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: outer; Vehicle Identification Number (VIN) to: 1K-9-091 375
Inner diameter 14.1 mm
Diameter 38.2 mm
Length 45 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6934
Borg & Beck BSK6934 Wishbone / Control / Trailing Arm Bush
ONLY
£7.76
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: inner; Vehicle Identification Number (VIN) from: 1K-9-091 376.; Also fits:- ;Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: inner; Vehicle Identification Number (VIN) to: 1K-9-091 375
Inner diameter 12.1 mm
Diameter 38.2 mm
Length 45 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6935
Borg & Beck BSK6935 Wishbone / Control / Trailing Arm Bush
ONLY
£7.76
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: inner; Vehicle Identification Number (VIN) from: 1K-9-091 376.; Also fits:- ;Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: inner; Vehicle Identification Number (VIN) to: 1K-9-091 375
Inner diameter 12.1 mm
Diameter 38.2 mm
Length 45 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6935
First Line FSK6935 Wishbone / Control / Trailing Arm Bush
ONLY
£7.76
Quantity:
Placement on Vehicle Lower, Front, Front Axle Left, Front Axle Right
Length 54 mm
Diameter 12 mm. 39 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers NST8026
NAPA NST8026 Wishbone / Control / Trailing Arm Bush
ONLY
£7.79
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Stabiliser Bar Diameter: 20 mm; for PR number: 0BJ
Type Mounting, stabiliser bar
Inner diameter 17 mm
Placement on Vehicle Rear Axle
Weight 0.022 kg
Function Mounting, stabiliser bar

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Blue Print ADV188002 Anti Roll Bar Bush
ONLY
£7.81
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Suspension: for vehicles without heavy duty suspension; Suspension: for vehicles without lifted suspension
Placement on Vehicle Rear, Front Axle Left, Front Axle Right
Length 53 mm
Diameter 63 mm
Material PA (polyamide)
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers NST8006
NAPA NST8006 Wishbone / Control / Trailing Arm Bush
ONLY
£7.82
Quantity:
Part number: 39011
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Vehicle Identification Number (VIN) to: ******1K*8*020816; Vehicle Identification Number (VIN): WVW**************; Vehicle Identification Number (VIN): 3VW**************; Suspension: for vehicles with sports suspension; for PR number: 1JC; or; Vehicle Identification Number (VIN) to: ******1K*8*020816; Vehicle Identification Number (VIN): WVW**************; Vehicle Identification Number (VIN): 3VW**************; Suspension: for vehicles with sports suspension; for PR number: 1JL
Placement on Vehicle Rear Axle
Material PU (Polyurethane)
Thickness 117 mm
Shape/Form Oval
Function Rubber Buffer, suspension
Weight 0.08 kg
Type Rubber Buffer, suspension

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 39011 Suspension Buffer
ONLY
£7.84
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: outer; Fitting Position: Lower; Vehicle Identification Number (VIN) from: 1K-9-091 376.; Also fits:- ;Fitting Position: Rear Axle; Fitting Position: Left; Fitting Position: Right; Fitting Position: outer; Fitting Position: Lower; Vehicle Identification Number (VIN) to: 1K-9-091 375
Only in connection with FCA6889
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Paired article numbers FSK6865
Borg & Beck BSK6865 Wishbone / Control / Trailing Arm Bush
ONLY
£7.86
Quantity:
Length 54 mm
Diameter 12 mm. 39 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Placement on Vehicle Lower, Front, Front Axle Left, Front Axle Right
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Paired article numbers AST8026
Apec AST8026 Wishbone / Control / Trailing Arm Bush
ONLY
£7.87
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Suspension: for vehicles without heavy duty suspension; Suspension: for vehicles without lifted suspension
Length 53 mm
Diameter 63 mm
Function Mounting, control/trailing arm
Type Mounting, control/trailing arm
Manufacturer AUDI SEAT SKODA VOLKSWAGEN
Material PA (polyamide)
Placement on Vehicle Rear, Front Axle Left, Front Axle Right
Paired article numbers AST8006
Apec AST8006 Wishbone / Control / Trailing Arm Bush
ONLY
£7.91
Quantity:

Page 1 of 5
Mountings & Bushes

What are mountings and bushes?

Mountings and bushes are components used to attach parts securely in your vehicle. Mountings and bushes are designed to keep their associated parts in place and in many cases provide shock absorption and articulation. There are many locations in a vehicle where mountings and bushes are used, especially where metal parts join together and require a rubber separation to prevent metal-on-metal damage.


How do I choose the correct mounting and bushes?

Finding the correct mounting and bushes is best done by cross referencing the original part number (OE). Although some of these parts look similar there can be subtle differences which may lead to them either not fitting correctly or failing prematurely. If you are not able to obtain and cross reference the OE part number here are some things to consider when looking for correct replacements:

  • Number of gears (i.e. 5 speed or 6 speed, manual, automatic etc)

  • Factory modifications (sports pack, levelling suspension, specific shape etc)

  • Transmission type / transmission code

  • Vehicle manufacture date (this is not the date the vehicle was registered but the date it was made)

  • Engine number sequence (up to or after as specific number/letter

  • VIN (chassis number) sequence (up to or after as specific number/letter

  • Standard, hydraulic or electric mounting

  • Diameter or other significant measure


What brand of mountings and bushes should I choose?

There are a number of brands available in the aftermarket. Some brands such as Bosch manufacture mountings and bushes for the original car brands however there are other high quality brands that meet or exceed the original specifications. Brands such as Blue Print, Delphi, Borg & Beck and Febi offer long warranties to take the worry out of choosing a quality part.


How can I tell my mountings or bushes needs replacing?

Often a visual check will show if the mounting or bushes need to be replaced. We always recommend you speak to a qualified mechanic if you are not sure. Some of the symptoms of a faulty mounting or bushes are:

  • There is a knocking noise when turning or going over bumps

  • The rubber has become split/damaged on the mounting or bush

  • There is loose play around the mounting or bush

  • There is fluid leaking from the mounting (hydraulic)

  • The mounting is corroded


Your feedback more
Trusted reviews more
Secure payments more
Simple returns more