CV Boots

invoice Page 1 of 3
Results 1 - 10 of 24
Part number: NCB8001
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: transmission sided.; Also fits:- ;Fitting Position: Front Axle; Fitting Position: Wheel Side
Title Stretchy Universal CV Boot Kit - Standard
Function Bellow, drive shaft
Length 1/ Length 2 58/128 mm
Joint Diameter, up to 116 mm
Joint diameter (mm) 56 mm
to shaft diameter 26 mm
for shaft diameter 18 mm
Type Bellow, drive shaft

Additional Information

  • Kit contains: CV boot, grease and small & large ear clamps
  • Fitment can be done with a conventional cone (NCB9103) or using the pneumatic tool (NCB9101) which can take as little as 20 minutes
  • Can be fitted to trilobal/tripod joints (see instructions)
  • Fits most cars as well as some 4x4's and LCV's with CV joints measuring: 18-26mm (shaft), 56-116mm (joint), 58-128mm (length)
  • Resistant to oil & grease, grit, abrasion, extreme temperature changes and impact damage
  • Superior flexibility reduces wear and tear, particularly when on full turning lock
  • Cut to size design allows it to fit most cars – reducing the range required
NAPA NCB8001 CV Joint Boot
ONLY
£8.87
Quantity:
Part number: NCB1003
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Wheel Side
Length 1/ Length 2 101/125 mm
Title Stretchy CV Boot Kit
Function Bellow, drive shaft
for shaft diameter 25 mm
Joint diameter (mm) 84 mm
to shaft diameter 35 mm
Joint Diameter, up to 112 mm
Type Bellow, drive shaft

Additional Information

  • Kit contains: CV boot, grease and small & large ear clamps
  • Fitment can be done with a conventional cone (NCB9103) or using the pneumatic tool (NCB9101) which can take as little as 20 minutes
  • Can be fitted to trilobal/tripod joints (see instructions)
  • Fits CV joints measuring: 20-29mm (shaft), 72-96mm (joint), 84-104mm (length)
  • Resistant to oil & grease, grit, abrasion, extreme temperature changes and impact damage
  • Direct OE replacement
  • Superior flexibility reduces wear and tear, particularly when on full turning lock
NAPA NCB1003 CV Joint Boot
ONLY
£8.90
Quantity:
Part number: ACB1005
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: transmission sided
Joint Diameter, up to 91 mm
Function Bellow, drive shaft
Joint diameter (mm) 68 mm
Type Bellow, drive shaft
Length 1/ Length 2 71/88 mm
to shaft diameter 34 mm
for shaft diameter 24 mm
Apec ACB1005 CV Joint Boot
ONLY
£9.01
Quantity:
Part number: ACB8001
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: transmission sided.; Also fits:- ;Fitting Position: Front Axle; Fitting Position: Wheel Side
to shaft diameter 26 mm
Function Bellow, drive shaft
Length 1/ Length 2 58/128 mm
Type Bellow, drive shaft
for shaft diameter 18 mm
Joint diameter (mm) 56 mm
Joint Diameter, up to 116 mm
Apec ACB8001 CV Joint Boot
ONLY
£9.15
Quantity:
Part number: ACB1003
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Wheel Side
for shaft diameter 25 mm
Joint Diameter, up to 112 mm
Function Bellow, drive shaft
Type Bellow, drive shaft
Length 1/ Length 2 101/125 mm
Joint diameter (mm) 84 mm
to shaft diameter 35 mm
Apec ACB1003 CV Joint Boot
ONLY
£9.19
Quantity:
Part number: FCB6141
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle Left; Fitting Position: Front Axle Right; Fitting Position: transmission sided
Function Bellow Kit, drive shaft
Additional Information 2 with clamps
Lubrication with grease lubrication
Replaces FCB2880
Length 96 mm
Inner diameter 2 70 mm
Inner diameter 1 35 mm
Extra Description Trilobe
Type Bellow Kit, drive shaft
First Line FCB6141 CV Joint Boot
ONLY
£9.20
Quantity:
Part number: NCB1005
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: transmission sided
Function Bellow, drive shaft
for shaft diameter 24 mm
Length 1/ Length 2 71/88 mm
Joint Diameter, up to 91 mm
Title Stretchy CV Boot Kit
Joint diameter (mm) 68 mm
to shaft diameter 34 mm
Type Bellow, drive shaft

Additional Information

  • Kit contains: CV boot, grease and small & large ear clamps
  • Fitment can be done with a conventional cone (NCB9103) or using the pneumatic tool (NCB9101) which can take as little as 20 minutes
  • Can be fitted to trilobal/tripod joints (see instructions)
  • Fits CV joints measuring: 20-29mm (shaft), 72-96mm (joint), 84-104mm (length)
  • Resistant to oil & grease, grit, abrasion, extreme temperature changes and impact damage
  • Direct OE replacement
  • Superior flexibility reduces wear and tear, particularly when on full turning lock
NAPA NCB1005 CV Joint Boot
ONLY
£9.92
Quantity:
Part number: 31056
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Transmission Type: 6-Speed Manual Transmission, automatically operated; or; Transmission Type: 6-Speed Manual Transmission
Additional Information with grease
Placement on Vehicle transmission sided, Front Axle Left, Front Axle Right
Function Bellow Kit, drive shaft
Weight 0.22 kg
Inner diameter 2 69 mm
Inner diameter 1 35 mm
Material Rubber
Length 95 mm
Additional Information 2 with clamps
Type Bellow Kit, drive shaft
Joint Type Tripod Joint

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

  • 1x Febi Clamping Clip (45643)
  • 1x Febi Clamping Clip (38760)
  • 1x Febi Molybdenum Grease (02582)
Febi 31056 CV Joint Boot
ONLY
£10.63
Quantity:
Part number: SB02
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle; Fitting Position: Wheel Side
Inner diameter 1 20 mm
Inner diameter 2 82 mm
Function Bellow Kit, drive shaft
Type Bellow Kit, drive shaft
Length 110 mm
Version Fitting Boot, Universal Cone
Shaftec SB02 CV Joint Boot
ONLY
£11.78
Quantity:
Part number: BCB6192
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Fitting Position: Front Axle Left; Fitting Position: Front Axle Right; Fitting Position: transmission sided
Function Bellow Kit, drive shaft
Length 84 mm
Inner diameter 2 77 mm
Inner diameter 1 29 mm
Type Bellow Kit, drive shaft
Lubrication with grease lubrication
Additional Information 2 with clamps
Borg & Beck BCB6192 CV Joint Boot
ONLY
£12.07
Quantity:

Page 1 of 3
CV Boots

What is a CV Boot?

A CV boot is a rubber like cover that fits over the CV joint of a drive shaft. These covers are sometimes called bellows as the are often corrugated in shape rather like the bellows of an accordion. They are designed to flex and move with the drive shaft however maintain a watertight seal around the CV joint.

Drive shafts generally have an inner (transmission side) and an outer (wheel side) joint which both need to be covered with a CV boot.

CV boots are made from different flexible materials such as:

  • Thermoplastic

  • Rubber

  • Silicone

  • Neoprene


What comes in a CV boot?

CV boots can come with different parts depending on the brand and if the part is described as a ‘CV boot’ or as a ‘CV boot kit’.

There are sometimes exceptions to this however nearly all CV boot kits come with clips and grease.

CV boots not listed as kits will often come with the items shown in the image only.

We are happy to let you know which brand provides the clips and grease with their CV boots if this is not clear on the listing.


How do I choose the correct CV boot?

The selection of CV boots for a vehicle is as varied is the number of drive shafts are for the same vehicle.

Some of the factors to consider when selecting the correct replacement CV boots are:

  • Number of gears (i.e. 5 speed or 6 speed etc)

  • If you need the inner or outer boot

  • The diameter of the large and small end of the boot

  • Manual or automatic transmission

  • If the vehicle has ABS

  • Transmission type / transmission code

  • Vehicle manufacture date (this is not the date the vehicle was registered but the date it was made

  • Engine number sequence (up to or after as specific number/letter

  • VIN (chassis number) sequence (up to or after as specific number/letter


What brand of CV boot should I choose?

The replacement costs of a CV boot is relatively small. Much of the expense is centred around the labour cost as fitting these parts can involve removing the drive shaft.

As with most replacement parts budget is a consideration. We would suggest a CV boot that has a long warranty and comes with the additional items that you need to fit them (clips and grease).


How can I tell my CV boot needs replacing?

When a CV boot has failed it is not always immediately obvious. These failures are often detected during an MOT which would lead to a test fail. The failure or split in the CV boot causes the protective grease to escape and water and dirt to replace it. Once the grease escapes it does not take long for the CV joint to fail.

Here are some ways you can tell your CV boot needs replacement:

  • Grease is sprayed on the inside of your wheel

  • Clicking sound when turning your vehicle in a circle

  • There is a split visible in the CV boot material

  • Vibrations as a result of a failing CV joint


Your feedback more
Trusted reviews more
Secure payments more
Simple returns more