Important compatibility info
Weight | 0.030 kg |
Number of Connectors / Ports | 2 |
Function | Switch, reverse light |
Spanner Size | 22 |
External Thread Size | M12 x 1,5 |
Type | Switch, reverse light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 115 mm |
Material | Thermoplast |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 97 mm |
Function | Bellow Kit, drive shaft |
Additional Information | with grease |
Additional Information 2 | with clamps, with screw |
Weight | 0.430 kg |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Molybdenum Grease (02582)
- 1x Febi Axle Bolt, drive shaft (40112)
- 1x Febi Clamping Clip (38758)
- 1x Febi Clamping Clip (45645)
Important compatibility info
Function | Thermostat, coolant |
Weight | 0.06 kg |
Opening Temperature | 105 °C |
Outer diameter | 33 mm |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.323 kg |
Material | Plastic |
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 6Q0 121 407 D |
Number of Connectors / Ports | 2 |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.37 kg |
Placement on Vehicle | Rear Axle |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (10819)
- 2x Febi Screw (37952)
- 1x Febi Nut (37954)
Important compatibility info
Weight | 0.010 kg |
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 23804 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Type | V-Ribbed Belt |
Function | V-Ribbed Belt |
Weight | 0.086 kg |
Number of Ribs | 6 |
Length | 1005 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Sensor, coolant temperature |
Function | Sensor, coolant temperature |
Colour | Grey |
Number of Connectors / Ports | 2 |
Weight | 0.050 kg |
External Thread Size | M22 x 1,5 |
Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.61 kg |
Cone Size | 18.2 mm |
Placement on Vehicle | Front Axle Right, Lower |
Paired article numbers | 36051 |
Additional Information | with nuts |
Function | Ball Joint |
Extra Description | ProKit |
External Thread Size | M12 x 1,5, M10 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Weight | 0.611 kg |
Paired article numbers | 36052 |
Additional Information | with nuts |
Function | Ball Joint |
Cone Size | 18.2 mm |
Extra Description | ProKit |
External Thread Size | M12 x 1,5, M10 x 1,5 |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Units / Pulleys | Water Pump |
Weight | 0.014 kg |
Width | 10 mm |
Number of Teeth | 87 |
Belts | with rounded tooth profile |
Type | Toothed Belt, power take-off |
Function | Toothed Belt, power take-off |
Surface | PTFE (Polytetrafluorethylene) coated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.24 kg |
Height | 164 mm |
Outer diameter | 55 mm. 61 mm |
Additional Information 2 | with pressure regulator |
Filter type | In-Line Filter |
Number of Connectors / Ports | 3 |
Pressure | 6.6 bar |
Function | Fuel filter |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.58 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information | with counter nut |
Function | Inner Tie Rod |
Length | 290 mm |
Extra Description | ProKit |
Internal Thread Size | M14 x 1,5 |
Type | Inner Tie Rod |
for OE number | 6R0 423 810 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Length | 1644 mm |
Function | Cable Pull, parking brake |
Weight | 0.405 kg |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thickness | 127 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | PU (Polyurethane) |
Function | Rubber Buffer, suspension |
Weight | 0.070 kg |
Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 126 mm |
Height | 126 mm |
Outer diameter | 21 mm. 60 mm. 72 mm. 82 mm. 83 mm |
Weight | 0.26 kg |
Function | Bellow Kit, drive shaft |
Placement on Vehicle | Front Axle, Rear Axle |
Material | Rubber |
Type | Bellow Kit, drive shaft |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.240 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 171557 |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.240 kg |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 171556 |
Type | Splash Guard, brake disc |
Function | Splash Guard, brake disc |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.081 kg |
Function | Cap, fuel tank |
Extra Description | febi Plus |
Type | Cap, fuel tank |
Additional Information 2 | with support strap |
Lockable | not lockable |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dust Cover Kit, shock absorber |
Material | PU (Polyurethane), Plastic |
Width | 80 mm |
Length | 300 mm |
Placement on Vehicle | Front Axle |
Weight | 0.16 kg |
Type | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (18365)
- 2x Febi Protective Cap/Bellow, shock absorber (01367)






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023