Important compatibility info
Paired article numbers | 193111 |
Mounting points diameter | 13 mm |
Placement on Vehicle | Front Axle Left |
Piston conrod diameter | 22 mm |
Max. Length | 518 mm |
Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Shock Absorber System | Twin-Tube |
Weight | 3.620 kg |
Min. Length | 339 mm |
Function | Shock Absorber |
Type | Shock Absorber |
Shock Absorber Type | Gas Pressure |
External Thread Size | M12 x 1,25 |
Pipe Diameter | 51 mm |
Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.213 kg |
Operating Mode | Mechanical |
Spanner Size | 32 |
Opening Pressure | 6.2 bar |
Type | Overflow Valve |
Function | Overflow Valve |
Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.161 kg |
Number of Connectors / Ports | 3 |
Function | Ignition Coil |
Type | Ignition Coil |
for OE number | MN195616 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M10 x 1,5 |
External Teeth, Wheel Side | 40 |
Internal Teeth, wheel side | 27 |
Weight | 2.756 kg |
Number of Teeth, ABS ring | 48 |
ABS Ring Diameter | 81 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Paper |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Type | Water Pump, engine cooling |
Number of Wings | 7 |
Weight | 0.775 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 25 |
Internal Teeth, wheel side | 33 |
Weight | 2.396 kg |
Number of Teeth, ABS ring | 43 |
ABS Ring Diameter | 82 mm |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 400 mm |
Outer diameter | 121 mm |
Function | Suspension Spring |
Wire Diameter | 14 mm |
Weight | 3.23 kg |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 328 mm |
Outer diameter | 134 mm |
Function | Suspension Spring |
Wire Diameter | 14 mm |
Weight | 2.58 kg |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Dryer, air conditioning |
Type | Dryer, air conditioning |
Weight | 0.764 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.1 kg |
Colour | Beige |
Material | Plastic |
Placement on Vehicle | Interior Door Panel, Left |
Type | Door Handle, interior equipment |
Paired article numbers | 184836 |
Extra Description | febi Plus |
Function | Door Handle, interior equipment |
Additional Information | without cladding |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023