Important compatibility info
Weight | 1.627 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 90. 70 |
Function | Timing Chain Kit |
Timing Chain Size | G68WN, G68V |
Type | Timing Chain Kit |
for OE number | 021 109 503 D S1 |
Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25364)
- 1x Febi Chain, intermediate shaft (09585)
- 1x Febi Guide, timing chain (25182)
- 1x Febi Guide, timing chain (25222)
- 1x Febi Guide, timing chain (25220)
- 1x Febi Tensioner, timing chain (25240)
- 1x Febi Tensioner, timing chain (25238)
Important compatibility info
Weight | 0.024 kg |
Placement on Vehicle | Rear Axle, outer |
Length | 28.5 mm |
Width | 35 mm |
Material | Rubber |
Thickness | 38 mm |
Inner diameter | 21 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Weight | 0.01 kg |
External Thread Size | M10 x 1 |
Type | Screw Plug, automatic transmission casing |
Spanner Size | 5 |
Function | Screw Plug, automatic transmission casing |
Length | 13 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.01 kg |
Outer diameter | 16 mm |
Function | Frost Plug |
Extra Description | febi Plus |
Type | Frost Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Cooler, automatic transmission |
for OE number | 096 409 061 E |
Weight | 0.78 kg |
Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.018 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, speed |
Type | Sensor, speed |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.012 kg |
Internal Thread Size | M10 x 1,5 |
Height | 10 mm |
Spanner Size | 16 |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 10 |
DIN / ISO | 980 |
Function | Nut, exhaust manifold |
Type | Nut, exhaust manifold |
Replaces | 10359 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Length | 205 mm |
Material | Metal |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Weight | 0.031 kg |
Spanner Size | 22 |
Number of Connectors / Ports | 1 |
Colour Coding | Blue |
Type | Oil Pressure Switch |
Function | Oil Pressure Switch |
Switch point from | 0.15 bar |
Switch point to | 0.35 bar |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Function | Wheel Bolt |
Wheel Fastening | Ball seat A/G |
Thread Length | 27 mm |
Surface | Chromed |
Spanner Size | 17, 19 |
Length | 53.5 mm |
Placement on Vehicle | Front Axle, Rear Axle |
Weight | 0.45 kg |
Screw length below head | 29 mm |
Outer diameter | 23.7 mm |
Material | Steel |
Quality/ Grade | 8.8 |
Type | Wheel Bolt |
Lockable | Lockable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.767 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 18503 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 158 mm |
Weight | 3.1 kg |
Placement on Vehicle | Rear Axle |
Length | 263 mm |
Spring Design | Coil spring with inconstant wire diameter |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pulleys | with freewheel belt pulley |
Number of Ribs | 6 |
Function | Alternator |
Alternator Charge Current | 120 A |
Belt Pulley Diameter | 56 mm |
Weight | 5.88 kg |
Type | Alternator |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tensioner, timing chain |
Weight | 0.125 kg |
Type | Tensioner, timing chain |
Operating Mode | hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 42 mm |
Spanner Size | 13, 22 |
Bolt Head/Nut Design | Male Hex |
Quality/ Grade | 10.9 |
Surface | Zink flake coated |
Function | Tensioner Bolt, alternator mounting |
Type | Tensioner Bolt, alternator mounting |
Weight | 0.041 kg |
External Thread Size | M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 13.5 mm |
Material | Plastic |
Outer diameter | 45 mm |
Inner diameter | 14 mm |
Bearing Type | Angular Ball Bearing |
Weight | 0.08 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Rolling Bearing, suspension strut support mount |
Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Function | Flasher Unit |
Voltage | 12 V |
Weight | 0.03 kg |
Relay Number | 22 |
Type | Flasher Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.155 kg |
Type | Filter, cabin air |
Width | 110 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Height | 30 mm |
Length | 535 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Master Cylinder, clutch |
Weight | 0.160 kg |
Type | Master Cylinder, clutch |
Fill Medium | Brake Fluid |
Bore Diameter | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | pneumatic |
Function | Fuel Pressure Regulator |
Pressure | 4 bar |
Weight | 0.05 kg |
Type | Fuel Pressure Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023