Proud to be a UK-based company
Contact us
Important compatibility info
| Paired article numbers | 19121 |
| Weight | 4.100 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | without ball joint |
| Material | Cast Steel |
| Additional Information | with holder, with rubber mounts |
| Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 1.160 kg |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.545 kg |
| Inner diameter | 38 mm |
| Inner diameter 1 | 42 mm |
| Inner diameter 2 | 51 mm |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
| Inner diameter 3 | 51 mm |
| Additional Information 2 | with clamps |
| Number of hoses | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Weight | 3.5 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 282 mm |
| Pipe Diameter | 38 mm |
| Mounting points diameter | 25 mm. 14 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Thread Size | M16 x 1,5 |
| Additional Information 2 | with bolts/screws |
| Transmission-side joint diameter | 107.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Weight | 8.098 kg |
| Min. Length | 794 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 3.106 kg |
| Type | Release Fork, clutch |
| Function | Release Fork, clutch |
| for OE number | 74 21 362 933 S2 |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Charge Air Cooler, Left |
| Height | 145 mm |
| Width | 290 mm |
| Additional Information 2 | with clamps |
| Inner diameter 1 | 49 mm |
| Inner diameter 2 | 66 mm |
| Weight | 1.368 kg |
| Type | Charge Air Hose |
| Hose Length | 690 mm |
| Function | Charge Air Hose |
| Turbocharger line | Piping to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 258 mm |
| Min. Length | 203 mm |
| Pipe Diameter | 49 mm. 60 mm |
| Mounting points diameter | 30 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 2.0 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.984 kg |
| Placement on Vehicle | Front |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Outer diameter | 140 mm |
| Thickness | 24 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 41 mm |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Screw (03931)
- 3x Febi Bolt, drive shaft flange (03934)
- 1x Febi Assembly Kit, propshaft joint (22117)
£58.20
Important compatibility info
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Colour | red/brown |
| Length | 822 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Weight | 6.200 kg |
| Cone Size | 26 mm |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.58 kg |
| Housing Diameter | 55 mm |
| Function | Slave Cylinder, engine brake |
| Pressure side external thread size | M10 x 1,5 |
| Housing length | 181.5 mm |
| Pressure side internal thread size | M12 x 1,5 |
| Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Width of castor bearing surface | 38 mm |
| Operating Mode | Automatic |
| Weight | 1.350 kg |
| Outer diameter | 70 mm |
| Width | 100 mm |
| Material | Metal |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 4.035 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 174228 |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 34224 |
| Weight | 3.841 kg |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23797)
£58.20
Important compatibility info
| Replaces | 12439 |
| Cone Size | 18 mm |
| Pipe Diameter | 32 mm |
| Type | Tie Rod |
| Function | Tie Rod |
| Extra Description | ProKit |
| Weight | 5.167 kg |
| Placement on Vehicle | Front Axle |
| Length | 1352 mm |
| Additional Information 2 | with crown nut |
| External Thread Size | M14 x 1,5, M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 5.2 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 760 mm |
| Min. Length | 474 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.19 kg |
| Placement on Vehicle | transmission sided |
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 180 mm |
| Thickness | 12 mm |
| Inner diameter | 154 mm |
| Function | Shaft Seal, crankshaft |
| Additional Information 2 | with mounting sleeve |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.092 kg |
| Opening Temperature | 82 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.420 kg |
| External Thread Size | M6 x 1, M26 x 1,5 |
| Internal Thread Size | M12 x 1,5 |
| Function | Breather Valve |
| Type | Breather Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.31 kg |
| Width of castor bearing surface | 25 mm |
| Material | Metal |
| Outer diameter | 70 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023