Important compatibility info
Length 3 | 1139 mm |
Length 4 | 879 mm |
Length 2 | 890 mm |
Length 1 | 1187 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Important compatibility info
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Length | 724 mm |
External Teeth, Wheel Side | 23 |
Function | Drive Shaft |
Number of Teeth, ABS ring | 44 |
Type | Drive Shaft |
External Teeth, Diff.Side | 23 |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Length 4 | 1132 mm |
Length 2 | 857 mm |
Length 3 | 1236 mm |
Length 1 | 940 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Important compatibility info
Length | 27 mm |
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Important compatibility info
Length 4 | 907 mm |
Length 1 | 1316 mm |
Function | Cable Pull, manual transmission |
Length 2 | 958 mm |
Length 3 | 1365 mm |
Type | Cable Pull, manual transmission |
Important compatibility info
Placement on Vehicle | Front Axle Right |
Type | Control/Trailing Arm, wheel suspension |
Diameter | 21 mm |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | FCA7874 |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Thread Measurement 1 | M16x1.5 |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6629 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5591)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6956)
Important compatibility info
Placement on Vehicle | Front Axle Left, Upper |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6976 |
Important compatibility info
Length 1 | 900 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Length 2 | 673 mm |
Length 3 | 825 mm |
Length 4 | 664 mm |
Important compatibility info
Diameter | 18 mm |
Placement on Vehicle | Front Axle Left |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7023 |
Important compatibility info
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Length | 24 mm |
Important compatibility info
Inner diameter | 10 mm |
Length | 120 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | both sides |
Type | Mounting, engine |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Thread Measurement 1 | M16x1.5 |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6628 |
Additional Information
- 1x Borg & Beck Ball Joint (BBJ5591)
- 1x Borg & Beck Mounting, control/trailing arm (BSK6956)
Important compatibility info
Paired article numbers | FCA6364 |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
Inner diameter 2 | 45 mm |
Colour | Black |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Inner diameter 1 | 45 mm |
Material | Polychloroprene (Neoprene) |
Type | Charge Air Hose |
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Rear |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7386 |
Important compatibility info
Placement on Vehicle | Rear Axle |
Bearing Code | Gen 3 |
Inner diameter 1 | 34 mm |
Outer diameter 1 | 151 mm |
Width 1 | 103 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Int. teeth, diff.side, conn.to transm. | 26 |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Placement on Vehicle | Front Axle Left, transmission sided |
Length | 183 mm |
Seal Diameter | 43.9 mm |
External Teeth, Diff.Side | 27 |
Important compatibility info
Opening Temperature | 88 °C |
Additional Information | with gaskets/seals |
Housing Type | with housing |
Housing material | Aluminium |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Replaces | BTS329.88 |
Important compatibility info
Inner diameter | 12 mm |
Length | 137 mm |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Height | 137 mm |
Type | Mounting, engine |
Placement on Vehicle | Upper Right |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Mounting points diameter | 14 mm |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA6819 |
Important compatibility info
Diameter | 18 mm |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | FCA7022 |
Placement on Vehicle | Front Axle Right |
Important compatibility info
Placement on Vehicle | Front Axle Right |
External Teeth, Wheel Side | 25 |
Function | Drive Shaft |
Length | 919 mm |
External Teeth, Diff.Side | 23 |
Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1172)
Important compatibility info
Width | 38 mm |
Quantity Unit | Set |
Function | Brake Shoe Set |
Type | Brake Shoe Set |
Placement on Vehicle | Rear Axle |
Important compatibility info
Number of Teeth | 20 |
Function | Clutch Kit |
Number of Parts | 3 -part |
Type | Clutch Kit |
Replaces | HK2257; HK2089 |
Important compatibility info
Number of Teeth | 26 |
Hub Profile | 21.4 x 20 |
Outer diameter | 200 mm |
Function | Clutch Kit |
Number of Parts | 3 -part |
Type | Clutch Kit |
Important compatibility info
Brake Disc Thickness | 10 mm |
Rotor Style | Solid |
Outer diameter | 295 mm |
Minimum thickness | 8 mm |
Centering Diameter | 59 mm |
Function | Brake Disc |
Quantity Unit | Set |
Number of Holes | 5 |
Surface | Coated |
Type | Brake Disc Rotor |
Height | 56 mm |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 2 |
Important compatibility info
Height | 62.5 mm |
Impeller Diameter | 72 mm |
Valve type | Flow Restriction Valve |
Number of Ribs | 5 |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Water Pump Pulley Diameter | 105 mm |
Function | Water Pump, engine cooling |
Important compatibility info
Surface | Coated |
Placement on Vehicle | Front Axle |
Rotor Style | Vented |
Brake Disc Thickness | 28 mm |
Outer diameter | 300 mm |
Number of Holes | 5 |
Height | 54.5 mm |
Minimum thickness | 25 mm |
Centering Diameter | 93 mm |
Function | Brake Disc |
Quantity Unit | Set |
Type | Brake Disc Rotor |
Important compatibility info
Function | Auxiliary water pump (cooling water circuit) |
Type | Auxiliary water pump (cooling water circuit) |
Voltage | 12 V |
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter 1 | 139 mm |
Additional Information 2 | with integrated ABS sensor |
Outer diameter 2 | 70 mm |
Function | Wheel Bearing Kit |
Width 1 | 55 mm |
Type | Wheel Bearing Kit |
Bearing Code | Gen 3 |
Important compatibility info
Hub Profile | 19.6 x 16.9 |
Engine Version | for engines without dual-mass flywheel |
Outer diameter | 210 mm |
Function | Clutch Kit |
Number of Parts | 2 -part |
Type | Clutch Kit |
Number of Teeth | 17 |
Important compatibility info
Length | 348 mm |
Placement on Vehicle | Front Axle Left |
Material | Cast Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | FCA8037 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right |
Paired article numbers | FCA8036 |
Steering arm type | Control Arm |
Length | 348 mm |
Material | Cast Steel |
Additional Information 2 | with ball joint |
Important compatibility info
Inner diameter 1 | 62 mm |
Colour | Black |
Material | Polychloroprene (Neoprene) |
Inner diameter 2 | 62 mm |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1004S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1109S)
Important compatibility info
Surface | Coated |
Outer diameter | 352 mm |
Brake Disc Thickness | 32 mm |
Number of Holes | 5 |
Centering Diameter | 71 mm |
Rotor Style | Vented |
Minimum thickness | 30.5 mm |
Height | 64 mm |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Function | Brake Disc |
Important compatibility info
Type | Wiper Motor |
Placement on Vehicle | Front |
Voltage | 12 V |
Function | Wiper Motor |
Additional Information | without rod assembly |
Important compatibility info
Number of Teeth | 17 |
Number of Parts | 3 -part |
Hub Profile | 19.8 x 17 |
Outer diameter | 190 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Important compatibility info
Number of Holes | 5 |
Outer diameter | 302 mm |
Minimum thickness | 20 mm |
Centering Diameter | 71 mm |
Function | Brake Disc |
Quantity Unit | Set |
Rotor Style | Vented |
Brake Disc Thickness | 22 mm |
Height | 35 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Placement on Vehicle | Rear Axle |
Number of mounting bores | 2 |
Important compatibility info
Number of belts | 1 |
Number of Teeth | 141 |
Width | 25.4 mm |
Function | Water Pump & Timing Belt Kit |
Type | Water Pump & Timing Belt Kit |
Important compatibility info
Placement on Vehicle | Front Axle |
Height | 43.9 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 68 mm |
Minimum thickness | 24.0 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Outer diameter | 296 mm |
Brake Disc Thickness | 26 mm |
Number of mounting bores | 2 |
Important compatibility info
Hub Profile | 20 x 17 |
Number of Teeth | 17 |
Outer diameter | 210 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Parts | 2 -part |
Important compatibility info
Rotor Style | Vented |
Placement on Vehicle | Front Axle |
Number of Holes | 6 |
Outer diameter | 250 mm |
Height | 37 mm |
Minimum thickness | 20 mm |
Centering Diameter | 81.1 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Brake Disc Thickness | 22 mm |
Important compatibility info
Surface | Coated |
Quantity Unit | Set |
Function | Brake Disc |
Minimum thickness | 21 mm |
Centering Diameter | 69 mm |
Rotor Style | Vented |
Outer diameter | 280 mm |
Number of Holes | 5 |
Brake Disc Thickness | 23 mm |
Height | 44.5 mm |
Placement on Vehicle | Front Axle |
Type | Brake Disc Rotor |
Number of mounting bores | 2 |
Important compatibility info
Number of Parts | 3 -part |
Hub Profile | 20.7 x 19.1 |
Outer diameter | 215 mm |
Function | Clutch Kit |
Type | Clutch Kit |
Number of Teeth | 18 |
Important compatibility info
Surface | Coated |
Rotor Style | Vented |
Outer diameter | 300 mm |
Function | Brake Disc |
Quantity Unit | Set |
Centering Diameter | 64.2 mm |
Minimum thickness | 26 mm |
Number of Holes | 5 |
Brake Disc Thickness | 28 mm |
Height | 46.1 mm |
Type | Brake Disc Rotor |
Placement on Vehicle | Front Axle |
Number of mounting bores | 4 |
Important compatibility info
Placement on Vehicle | Front Axle |
Rotor Style | Vented |
Number of Holes | 5 |
Outer diameter | 300 mm |
Brake Disc Thickness | 26 mm |
Height | 56.4 mm |
Minimum thickness | 22 mm |
Centering Diameter | 68.2 mm |
Function | Brake Disc |
Quantity Unit | Set |
Surface | Coated |
Type | Brake Disc Rotor |
Number of mounting bores | 1 |
Important compatibility info
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Number of pads | 4 |
Thickness/Strength 1 | 15.4 mm |
Width 1 | 209.6 mm |
Height 1 | 94.2 mm |
Wear Warning Contact | prepared for wear warning indicator |
Brake System | Brembo |
Placement on Vehicle | Front Axle |
Important compatibility info
Function | Brake Disc |
Centering Diameter | 70.7 mm |
Minimum thickness | 21.0 mm |
Outer diameter | 315 mm |
Brake Disc Thickness | 23 mm |
Height | 44.9 mm |
Number of Holes | 5 |
Rotor Style | Vented |
Placement on Vehicle | Rear Axle |
Type | Brake Disc Rotor |
Quantity Unit | Set |
Surface | Coated |
Number of mounting bores | 1 |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023