Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| Inner diameter | 11 mm |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Placement on Vehicle | Rear Axle |
| Weight | 0.735 kg |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.24
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Sheet Steel |
| Additional Information 2 | with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 181138 |
| Weight | 1.049 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.52
Important compatibility info
| Additional Information 2 | with lid |
| Width | 37.6 mm |
| Outer diameter | 55 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Weight | 0.459 kg |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.97
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 1.714 kg |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 30 |
| Internal Teeth, wheel side | 27 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£31.88
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 281 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Weight | 0.315 kg |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Weight | 5.340 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 286 mm |
| Thickness | 63.4 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 58 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.03
Important compatibility info
| Weight | 6.2 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 277 mm |
| Thickness | 57 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 58 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.50
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 228 W |
| Weight | 1.2 kg |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.53
Important compatibility info
| Weight | 0.106 kg |
| for OE number | 10921AA140 |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£78.00
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.040 kg |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.20
Important compatibility info
| Number of Connectors / Ports | 12. 4. 14 |
| Weight | 0.12 kg |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Cast Aluminium |
| Additional Information 2 | with seal ring |
| Weight | 1.54 kg |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Heating / Cooling | for vehicles without oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£122.75
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Weight | 0.252 kg |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£151.21
Important compatibility info
| Weight | 0.023 kg |
| Material | Rubber |
| Function | Mount, exhaust system |
| Type | Mount, exhaust system |
| Outer diameter | 58 mm |
| Replaces | 07393 |
| Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£3.83
Important compatibility info
| Weight | 0.007 kg |
| Length | 11.5 mm |
| Outer diameter | 16.6 mm |
| Inner diameter | 12.56 mm |
| Function | Bush, starter shaft |
| Type | Bush, starter shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£3.84
Important compatibility info
| Weight | 0.002 kg |
| Outer diameter | 19 mm |
| Function | Retaining Clip, underbody panelling |
| Material | Plastic, PA (polyamide) |
| Length | 31 mm |
| Colour | Black |
| Type | Retaining Clip, underbody panelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£3.84
Important compatibility info
| Screw length below head | 16 mm |
| Bolt Head/Nut Design | Female Torx |
| Function | Engine Guard/Skid Plate |
| Outer diameter | 15 mm. 5 mm |
| Spanner Size | T25 |
| Weight | 0.004 kg |
| Material | Steel |
| Type | Engine Guard/Skid Plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£3.89
Important compatibility info
| Function | Retaining Clip, underbody panelling |
| Material | Plastic, PA (polyamide) |
| Weight | 0.001 kg |
| Length | 15 mm |
| Colour | Black |
| Outer diameter 1 | 7 mm |
| Outer diameter 2 | 20 mm |
| Type | Retaining Clip, underbody panelling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.09
Important compatibility info
| Height | 15.8 mm |
| Weight | 0.005 kg |
| Material | Plastic |
| Bolt / Nut Version | Sheet Metal Nut |
| Type | Retaining Clip, bonnet noise insulation |
| Function | Retaining Clip, bonnet noise insulation |
| Outer diameter | 20.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.14
Important compatibility info
| Material | Plastic, PA (polyamide) |
| Function | Expanding Rivet |
| Weight | 0.001 kg |
| Length | 23 mm |
| Outer diameter | 10 mm |
| Type | Expanding Rivet |
| Bore Diameter | 5 mm |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.20
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023