Important compatibility info
Weight | 3.705 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 39360 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with holder, with rubber mounts |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer length 1 | 1045 mm |
Inner length 1 | 789 mm |
Placement on Vehicle | Left |
Paired article numbers | 179936 |
Weight | 0.440 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Cooler, engine oil |
Weight | 1.119 kg |
Number of Ribs | 20 |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 174761 |
Cone Size | 16 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.35 kg |
Placement on Vehicle | Front Axle Right, Upper |
Material | Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, adjuster |
Weight | 0.540 kg |
Type | Repair Kit, adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 43 mm |
Function | Alternator Freewheel Clutch |
Type | Alternator Freewheel Clutch |
Weight | 0.478 kg |
Outer diameter | 55 mm |
Number of Ribs | 6 |
Tightening Torque | 85 Nm |
Additional Information 2 | with lid |
Inner diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 6Q1 423 891 H |
Type | Hydraulic Hose, steering |
Function | Hydraulic Hose, steering |
Manufacturer Restriction | TRW |
Weight | 0.194 kg |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.460 kg |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
for OE number | 50515057 SK |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Length | 198 mm |
Outer diameter | 106 mm |
External Teeth, Wheel Side | 35 |
Seal Diameter | 71.5 mm |
Internal Teeth, wheel side | 29 |
Weight | 4.1 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M33 x 1,5 |
Important compatibility info
Weight | 3.83 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30425 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts, with holder |
Weight | 3.705 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 39359 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.17 kg |
Function | Relay, glow plug system |
Number of Connectors / Ports | 7 |
Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 30426 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.83 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side |
Length | 141 mm |
Outer diameter | 73 mm |
External Teeth, Wheel Side | 26 |
Seal Diameter | 55.6 mm |
Internal Teeth, wheel side | 19 |
Weight | 1.660 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Operating Mode | Electric-pneumatic |
Type | Pressure converter, turbocharger |
Function | Pressure converter, turbocharger |
Extra Description | febi Plus |
Voltage | 12 V |
Weight | 0.21 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer length 1 | 1205 mm |
Inner length 1 | 900 mm |
Placement on Vehicle | Right |
Paired article numbers | 179913 |
Weight | 0.460 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing Diameter | 18 mm |
Eject Force | 280 N |
Stroke | 104 mm |
Weight | 0.175 kg |
Mounting points diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Placement on Vehicle | both sides |
Housing length | 169.5 mm |
Length | 298 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.4 kg |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Piston conrod diameter | 12.5 mm |
Mounting points diameter | 12 mm |
Min. Length | 228 mm |
Max. Length | 310 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Pipe Diameter | 40 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | Window Regulator |
Number of Connectors / Ports | 5 |
Placement on Vehicle | Passenger Side |
Type | Multi-Function Switch |
Function | Multi-Function Switch |
Weight | 0.073 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 3.28 kg |
Length | 4910 mm |
Outer diameter | 8.5 mm |
Inner diameter | 4.2 mm |
Pressure | 400 bar |
Function | Hose Line, driver cab tilting device |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 0.907 kg |
Paired article numbers | 177106 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Internal Teeth, wheel side | 27 |
Weight | 2.646 kg |
Type | Joint Kit, drive shaft |
Thread Size | M24 x 2,0 |
Placement on Vehicle | Front Axle Left, Wheel Side, Front Axle Right |
External Teeth, Wheel Side | 31 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.053 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Cable Length | 620 mm |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 1.2 kg |
Paired article numbers | 177122 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Right Front |
Number of Doors | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Additional Information | with rubber mounts, with lock nut |
Weight | 3.99 kg |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 172562 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with coolant level sensor |
Function | Expansion Tank, coolant |
Number of Connectors / Ports | 2 |
Material | PA (polyamide) |
Weight | 1.05 kg |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.746 kg |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.085 kg |
Height | 464 mm |
Outer diameter | 309 mm |
Inner diameter | 180 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 1.2 kg |
Paired article numbers | 177119 |
Operating Mode | Electric |
Placement on Vehicle | Left Front |
Additional Information | without electric motor |
Number of Doors | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.059 kg |
Length | 832 mm |
Function | Oil Dipstick |
Additional Information | with guide tube |
Extra Description | febi Plus |
Type | Oil Dipstick |
Colour | Red |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Outer diameter | 26 mm |
Inner diameter | 19 mm |
Cooling Hose | from expansion tank to engine cooler and water pipe |
Function | Radiator Hose |
Weight | 0.51 kg |
Type | Radiator Hose |
Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.086 kg |
Cable Length | 460 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
for OE number | 226A0-JA10C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 0.068 kg |
Function | Sensor, crankshaft pulse |
Length | 512 mm |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.6 kg |
Bolt Hole Circle Diameter | 124 mm |
Function | Clutch, radiator fan |
Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 660 mm |
Function | Sensor, exhaust gas temperature |
Weight | 0.049 kg |
Spanner Size | 17 |
Number of Connectors / Ports | 2 |
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.82 kg |
Placement on Vehicle | Upper Right |
Length | 250 mm |
Width | 120 mm |
Thickness | 170 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.44 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 23888 |
Weight | 1.370 kg |
Placement on Vehicle | Rear Axle Upper, Right Rear |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Front |
Weight | 1.160 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.265 kg |
Placement on Vehicle | Centre |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | with ball bearing, with fastening material |
Width | 20 mm |
Outer diameter | 72 mm |
Inner diameter | 35 mm |
Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (24782)
- 1x Febi Assembly Kit, propshaft joint (29622)
- 1x Febi Assembly Kit, propshaft joint (29626)
Important compatibility info
Weight | 0.828 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
External Thread Size | M8 x 1,25 |
Type | Mounting, engine |
Additional Information 2 | with splash protection cover |
for OE number | 8E0 199 382 AJ |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.775 kg |
Type | Repair Kit, brake camshaft |
Function | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Outer diameter | 133 mm |
Thickness | 30 mm |
Inner diameter | 45 mm |
Number of Holes | 6 |
Bolt Hole Circle Diameter | 96 mm |
Placement on Vehicle | Front |
Function | Joint, propshaft |
Weight | 0.51 kg |
Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper, Rear Axle Right, Rear, outer |
Weight | 1.240 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 184960 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 25 mm |
Outer diameter | 55 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Weight | 0.700 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control Valve, camshaft adjustment |
Type | Control Valve, camshaft adjustment |
Weight | 0.113 kg |
Placement on Vehicle | Exhaust Side |
Extra Description | febi Plus |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 05A 906 051 |
Number of Connectors / Ports | 3 |
Function | Sensor, fuel pressure |
External Thread Size | M18 x 1,5 |
Type | Sensor, fuel pressure |
Weight | 0.04469 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with axle nut |
Placement on Vehicle | Rear Axle |
Width | 129 mm |
Outer diameter | 79.4 mm |
Inner diameter | 32 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Weight | 1.9 kg |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 280 mm |
Rotor Style | Solid |
Weight | 4.04 kg |
Rim Hole Number | 5 -Hole |
Thickness | 65 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 75 mm |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.265 kg |
Rotor Style | Solid |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 271 mm |
Thickness | 40.8 mm |
Brake Disc Thickness | 11 mm |
Minimum thickness | 9 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 63.6 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023