Proud to be a UK-based company
Contact usWorkshop Tools
Categories
Brand:
Select Brand
invoice Page 8 of 179
Results 71 - 80 of 1789
Part number: PWB03
Important compatibility info
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This three row wire brush from Pearl Automotive is constructed of wood housing wire strands commonly used for the cleaning and removal of corrosion on metal. Available in four, three or two row brushes. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Most commonly used for the cleaning and removal of corrosion on metal
- Made from steel strands
- Brush constructed of wood housing wire strands, available in four, three or two rows
ONLY
£6.62
£6.62
Part number: PWB01
Important compatibility info
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. This four row wire brush from Pearl Automotive is constructed of wood housing wire strands commonly used for the cleaning and removal of corrosion on metal. Available in four, three or two row brushes. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Most commonly used for the cleaning and removal of corrosion on metal
- Made from steel strands
- Brush constructed of wood housing wire strands, available in four, three or two rows
ONLY
£6.16
£6.16
Part number: PTA135
Important compatibility info
| Title | Car Dust Caps - Black - Pack Of 100 |
Additional Information
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances.
Pearl has established a reputation over the years for delivering high quality products. With recent expansions into a more diverse product portfolio of automotive products, its established Wot Nots' brand is still thriving. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
Over time small parts deteriorate. To avoid a drop in your vehicles efficiency and performance you may need to replace these from time to time to ensure that you vehicle is running effectively and efficiently. Pearl Automotive provide a wide range of replacement parts and accessories to cater for a wide range of circumstances. The Pearl Black Dust caps are an easy to fit replacement. They come in a large pack of 100 and have been designed with a flat back finish to them. Pearl Products is a family run business that supplies the automotive market with accessories and aftermarket solutions. It is the largest family run business of its kind in the market today and aims to provide a high quality, single source solution to its customers. Pearl boasts a product portfolio in excess of 4000 part numbers, with ranges covering anything from replacement parts to workshop consumables.
- Can also be used on cycles
- These caps are used to stop dirt entering the Schrader Valve on tyres
- Supplied in Black plastic
ONLY
£5.82
£5.82
Part number: TSP1T15
Important compatibility info
| Title | Tyre Safety Pack, TPG1H01 (Tyre Pressure Gauge) & TDG16C01 (Tyre Tread Depth Gauge) |
Additional Information
The handy Tyre Safety Pack comprises of Tyre Pressure Gauge and Tyre Tread Depth Gauge. PCL's TPG1 and TPG20 Tyre Pressure Gauges incorporate a self-adjusting friction device which enables the pressure to be read when the tyre pressure gauge is removed from the tyre valve, and a positive sealing washer to ensure reliability. Features integral pocket clip and removable protective cap. PCL's in.Made in Sheffieldin. Tyre Tread Depth Gauge is manufactured to stringent quality standards and is DVSA approved for MOT testing. It provides accurate measurement of tread 1-26mm and has a handy pocket clip. The Tyre Safety Pack is supplied in an durable, reusable tin with a protective foam insert. Awarded Best Buy 2017 and 2019 by Auto Express - July 2017 and May 2019
- 1.6 mm illegal tyre tread depth mark
- Accurate measurement of tread 1-26 mm
- DVSA approved for MOT testing
- Self-adjusting friction device
- A positive sealing washer ensures reliability
- Accuracy: +/- 2 psi
- Calibration: 6-50 psi / 0.5-3.4 bar
- Reading Accuracy
- 1 psi / 0.1 bar
ONLY
£21.68
£21.68
Part number: TPG1H07
Important compatibility info
| Title | Tyre Pressure Gauge Angled Head 6-50 psi & 0.5-3.4 bar (Blister Packed) |
Additional Information
The TPG1 is a Pocket Tyre Pressure Gauge with an angled head designed to fit onto the tyre valve at 90 degrees. PCL's TPG1 Pocket Tyre Pressure Gauge incorporates a self-adjusting friction device which enables the pressure to be read when the tyre pressure gauge is removed from the tyre valve, and a positive sealing washer to ensure reliability. Features integral pocket clip and removable protective cap.
- Complies with BS EN12645:2014
- Includes integral pocket clip and removable protective cap
- Accuracy: +/- 2 psi
- Calibration: 6-50 psi / 0.5-3.4 bar
- Reading Accuracy: 1 psi / 0.1 bar
ONLY
£12.57
£12.57
Part number: TDG16C01
Important compatibility info
| Title | Tyre Tread Depth Gauge (1-26mm with 1.6mm Mark) DVSA Approved |
Additional Information
PCL's in.Made in Sheffieldin. Tyre Tread Depth Gauge is manufactured to stringent quality standards and is DVSA (Previously VOSA) MOT centre approved. Easy to read this DVSA approved for MOT testing (previously VOSA) Tyre Tread Depth Gauge provides accurate measurement of tread 1-26mm and has a handy pocket clip.
- Handy pocket clip
- Department of Transport accepted for MOT testing
- 1.6mm illegal tyre tread depth mark
- Accurate measurement of tread 1-26 mm in 1 mm increments
- Approvals: Department of Transport accepted for MOT testing
- Accuracy: +/- 0.25 mm
- Calibration: 1-26 mm
ONLY
£7.22
£7.22
Part number: ACA2593S
Important compatibility info
| Title | Standard Male Adaptor -Thread R 1/4 |
Additional Information
- Case hardened for longer life
- Used with Airflow, Vertex, Twin, non-corrodible and Safeflow Safety couplings
- Wide choice of thread and hose tail sizes
- Used in most workshop/garage environments
- Nominal Bore 4.8 mm
- Thread Type Male
- Thread Size R 1/4
ONLY
£4.75
£4.75
Part number: ACA2746S
Important compatibility info
| Title | Standard Adaptor Socket - Female Thread |
Additional Information
- Female Thread Rp 1/4
- Case hardened for longer life
- Used with Airflow, Vertex, Twin, non-corrodible and Safeflow Safety couplings
- Wide choice of thread and hose tail sizes
- Used in most workshop/garage environments
ONLY
£4.75
£4.75
Part number: HA5212
Important compatibility info
| Title | Coiled Air Hose Assemblies - Polyurethane |
Additional Information
A range of hose sizes, working lengths and colour is available. PU Coiled Air Hose Assemblies overcome the limitations of nylon, such as kinking, abrasion and resistance to oils, and increases the effective working temperature range. The use of PU allows use in any direction with the elimination of hose kinks aiding air flow. It also provides ease of use when attached to tools, helps protect tool ends and leaves the work area clear of entanglements and trip hazards.
- Range of hose sizes, working lengths and a choice of colour
- Hose recoils to a fraction of it's working length
- 200 m straight ends with spring guard
- Nickel plated 360° swivel fittings
- Polyurethane (PU) material
- Maximum Working Pressure: 200 psi / 14 bar Hose Length: 5 m Hose Inside Diameter: 6.5 mm Hose Outside Diameter: 10 mm Hose Fittings: R 1/4 swivel ends Hose Colour: Blue
ONLY
£24.03
£24.03
Part number: DTI08
Important compatibility info
| Title | DTI Tyre Inflator |
Additional Information
PCL has drawn on its depth of industry knowledge to produce the new DTI Tyre Inflator. Ideal for workshops in need of a professional tool that won’t break the bank. This highly accurate DTI Tyre Inflator is suitable for all kinds of tyre applications; its ability to inflate up to 170 psi, coupled with its robust construction makes it an ideal addition to the tyreshop tool box. Simple to use, it features a hand trigger inflate and thumb operated deflate button so that the user can achieve accurate tyre pressures with speed and ease. For low visibility areas the backlight can be used to further illuminate the LCD display, which incorporates a battery level indicator. The gauge itself features an auto power off function to preserve battery life, which is excellent – 1000 hours use with the backlight off and 40 hours use with it on. Measurements can be taken with different units of pressure - psi, bar and kpa – and the choice can be selected with the simple push of a button, with the last selection saved. Each gauge is individually serialised and supplied with a calibration certificate traceable to international standards. In short the DTI Tyre Inflator makes entry level electronic inflation technology available to all, and is a very useful addition to any professional workshop.
- Solid and robust construction
- Hand trigger inflate and thumb controlled deflate
- Auto power off
- Backlight
- Long battery life with battery level indicator
- psi, bar kpa units of pressure selectable by button; last selection saved
- Powered by PCL inflation technology and experience
- Suitable for all applications including tyreshop environments
- Low and simple maintenance
- Easy and cost effective to use
- Reliable accuracy (+/- 1 psi up to 60 psi, then 2 psi up to 150 psi) with individual testing and certification
- Large, clear, easy to read LCD display with backlight
- Pressure Range: 5 - 170 psi / 0.34 - 12 bar / 34 - 1200 kPa Maximum Supply Pressure: 218 psi / 15 bar / 1500 kPa Inflation Flow: 910 l/min @ 13 bar supply Battery Life: 1000 hours with backlight off / 40 hours with backlight on Battery Type: 1 x CR2450 (supplied) Hose length: 1.8m Tyre Valve Connection: Euro Clip-on Calibration: 5-170 psi / 0.34-12 bar / 34-1200 kPa
ONLY
£67.44
£67.44
Page 8 of 179
Workshop Tools
