Important compatibility info
Length | 1170 mm |
Function | Cable Pull, clutch control |
Type | Cable Pull, clutch control |
Important compatibility info
Length | 1460 mm |
Function | Cable Pull, clutch control |
Type | Cable Pull, clutch control |
Important compatibility info
Additional Information 2 | with clamps |
Inner diameter 1 | 12 mm |
Material | Thermoplast |
Function | Bellow Kit, steering |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Bellow Kit, steering |
Inner diameter 2 | 51 mm |
Length | 170 mm |
Important compatibility info
Placement on Vehicle | Front Axle, Left, Right, Upper |
Inner diameter | 12.2 mm |
Diameter | 36.5 mm |
Length | 35 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6978 |
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rotation Direction | Clockwise rotation |
Rated Power | 0.7 kW |
Number of mounting bores | 3 |
Number of Thread Bores | 1 |
Function | Starter |
Type | Starter |
Important compatibility info
Inner diameter 1 | 37 mm |
Inner diameter 2 | 36 mm |
Colour | Black |
Material | PE (Polyethylene) |
Function | Charge Air Hose |
Placement on Vehicle | Lower, Front |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1001S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1103S)
Important compatibility info
Inner diameter 1 | 30 mm |
Colour | Black |
Inner diameter 2 | 30 mm |
Material | PE (Polyethylene) |
Port / Connector type | OE PUSH CONNECTOR |
Function | Charge Air Hose |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1000S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1102S)
Important compatibility info
Material | AEM (Ethylene Acrylate Rubber) |
Colour | Black |
Inner diameter 1 | 58 mm |
Function | Charge Air Hose |
Type | Charge Air Hose |
Inner diameter 2 | 58 mm |
Important compatibility info
Thread Measurement 2 | M14X1.5 |
Length | 324 mm |
Thread Measurement 1 | M18X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 324 mm |
Axle Joint Thread Type | with right-hand thread, with external thread |
Type | Inner Tie Rod |
Important compatibility info
Thread Measurement 2 | M14X1.5 |
Length | 281 mm |
Thread Measurement 1 | M18X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 281 mm |
Axle Joint Thread Type | with external thread |
Type | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Thread Measurement 1 | M14x1.5 |
Thread Type | with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5637 |
Placement on Vehicle | Front Axle Left, outer |
Important compatibility info
Thread Measurement 2 | M14X1.5 |
Thread Measurement 1 | M20X1.5 |
Length | 198 mm |
Function | Inner Tie Rod |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Axle Joint Length | 198 mm |
Type | Inner Tie Rod |
Important compatibility info
Important compatibility info
Bearing Code | Gen 0 |
Inner diameter 1 | 25 mm |
Outer diameter 1 | 62 mm |
Width 1 | 17 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Important compatibility info
Length | 390 mm |
Required quantity | 2 |
Function | Warning Contact, brake pad wear |
Length 2 | 365 mm |
Length 1 | 365 mm |
Type | Warning Contact, brake pad wear |
Important compatibility info
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Additional Information 2 | with bore for sensor |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Height | 84 mm |
Number of Ribs | 8 |
Impeller Diameter | 112 mm |
Number of Seals | 1 |
Water Pump Pulley Diameter | 146 mm |
Type | Water Pump, engine cooling |
Number of Wings | 5 |
Function | Water Pump, engine cooling |
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Length | 355 mm |
Additional Information | with banjo fitting |
Function | Brake Hose |
Type | Brake Hose |
Additional Information 2 | without banjo bolt |
Thread Measurement 1 | M10x1 |
Thread Type | with internal thread |
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Mounting points diameter | 12.2 mm |
Steering arm type | Control Arm |
Length | 238 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023