Important compatibility info
Length | 208 mm |
Inner diameter 2 | 62 mm |
Material | Thermoplast |
Function | Bellow Kit, steering |
Type | Bellow Kit, steering |
Additional Information 2 | with clamps |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Inner diameter 1 | 15 mm |
Important compatibility info
Inner diameter | 21 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Paired article numbers | FSK6475 |
Placement on Vehicle | Front Axle, Left, Right, Rear |
Important compatibility info
Length | 110 mm |
Thread Size | M12X1.5 |
Thread Measurement 2 | M12X1.5 |
Rod/Strut | Coupling Rod |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Important compatibility info
Function | Repair Kit, stabiliser coupling rod |
Type | Repair Kit, stabiliser coupling rod |
Placement on Vehicle | Front Axle |
Important compatibility info
Outer diameter | 82 mm |
Inner diameter | 10 mm |
Additional Information 2 | without bearing |
Function | Suspension Strut Support Mount |
Height | 34 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Suspension Strut Support Mount |
Paired article numbers | FSM5338 |
Important compatibility info
Colour | Black |
Inner diameter 2 | 54 mm |
Inner diameter 1 | 54 mm |
Port / Connector type | HORSE SHOE CLIP |
Function | Charge Air Hose |
Material | AEM (Ethylene Acrylate Rubber) |
Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1003S)
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC1108S)
Important compatibility info
Length | 245 mm |
Function | Hose, crankcase ventilation |
Number of Inlets / Outlets | 3 |
Type | Hose, crankcase ventilation |
Material | NBR (nitrile butadiene rubber) |
Inner diameter 1 | 9.8 mm |
Inner diameter 2 | 9.8 mm |
Important compatibility info
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Pipe Diameter | 52 mm |
for OE number | 1075005 |
Rod/Strut | Push Rod |
Thread Measurement 2 | M30X1.5 |
Thread Measurement 1 | M20X1.5 |
Length | 800 mm |
Important compatibility info
Type | Centre Rod Assembly |
Thread Measurement 1 | M30X1.5 |
Pipe Diameter | 50 mm |
Rod/Strut | Push Rod |
Thread Measurement 2 | M24X1.5 |
Length | 995 mm |
Function | Centre Rod Assembly |
Important compatibility info
Thread Measurement 1 | M14x1.5 |
Thread Type | with right-hand thread, with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR4915 |
Important compatibility info
Thread Type | with internal thread |
Function | Tie Rod End |
Type | Tie Rod End |
Paired article numbers | FTR5177 |
Important compatibility info
Thread Measurement 2 | M16X1.5 |
Length | 349 mm |
Thread Measurement 1 | M16X1.5 |
Function | Inner Tie Rod |
Axle Joint Length | 349 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Inner Tie Rod |
Important compatibility info
Bearing Code | Gen 2 |
Function | Wheel Bearing Kit |
Inner diameter 1 | 45 mm |
Placement on Vehicle | Rear Axle |
Outer diameter 1 | 189 mm |
Type | Wheel Bearing Kit |
Important compatibility info
Water pump impeller material | Metal |
Water Pump Pulley Diameter | 58 mm |
Impeller Diameter | 79 mm |
Additional Information | with gaskets/seals |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Important compatibility info
Function | Clutch Kit |
Hub Profile | 24.5 x 21.2 |
Number of Teeth | 21 |
Outer diameter | 212 mm |
Type | Clutch Kit |
Number of Parts | 3 -part |
Important compatibility info
Placement on Vehicle | Left Rear, Right Rear |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Length 2 | 1650 mm |
Length 1 | 1975 mm |
Important compatibility info
Additional Information | with gaskets/seals |
Housing Type | with housing |
Opening Temperature | 83 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information 2 | with sensor |
Important compatibility info
Axle Joint Length | 234 mm |
Length | 234 mm |
Thread Measurement 1 | M14X1.5 |
Thread Measurement 2 | M14X1.5 |
Function | Inner Tie Rod |
Type | Inner Tie Rod |
Important compatibility info
Function | Brake Disc |
Centering Diameter | 63.6 mm |
Minimum thickness | 26 mm |
Outer diameter | 324 mm |
Number of Holes | 5 |
Brake Disc Thickness | 28 mm |
Height | 52 mm |
Placement on Vehicle | Front Axle |
Type | Brake Disc Rotor |
Rotor Style | Vented |
Quantity | 1 |
Surface | Coated |
Number of mounting bores | 1 |
Important compatibility info
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Replaces | BWL3033 |
Placement on Vehicle | Front Axle |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023