Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 865 mm |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 23 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7038 |
Important compatibility info
| External Teeth, Diff.Side | 26 |
| External Teeth, Wheel Side | 25 |
| Function | Drive Shaft |
| Length | 929 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Length | 557 mm |
| External Teeth, Diff.Side | 37 |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1368)
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1392)
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Outer diameter | 294 mm |
| Rotor Style | perforated/vented |
| Number of Holes | 4 |
| Brake Disc Thickness | 22 mm |
| Height | 44 mm |
| Minimum thickness | 20.4 mm |
| Centering Diameter | 64 mm |
| Function | Brake Disc |
| Quantity Unit | Set |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
Important compatibility info
| Inner diameter 2 | 48 mm |
| Colour | Black |
| Inner diameter 1 | 48 mm |
| Material | PE (Polyethylene) |
| Port / Connector type | OE PUSH CONNECTOR |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
Additional Information
- 1x Borg & Beck Fastening Clamp, charge air hose (BHC2004S)
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 26 x 24 |
| Outer diameter | 230 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 24 |
Important compatibility info
| Pipe Diameter | 52 mm |
| Type | Centre Rod Assembly |
| Thread Measurement 2 | M24X1.5 |
| Thread Measurement 1 | M30X1.5 RHT |
| Rod/Strut | Push Rod |
| Length | 1054 mm |
| Function | Centre Rod Assembly |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Outer diameter | 322 mm |
| Function | Brake Disc |
| Centering Diameter | 67 mm |
| Minimum thickness | 30.0 mm |
| Number of Holes | 5 |
| Rotor Style | perforated/vented |
| Quantity | 1 |
| Brake Disc Thickness | 32 mm |
| Height | 52 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 1 |
Important compatibility info
| Function | Clutch Kit |
| Outer diameter | 230 mm |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
Important compatibility info
| Hub Profile | 25.6 x 23 |
| Outer diameter | 203 mm |
| Function | Clutch Kit |
| Number of Teeth | 24 |
| Type | Clutch Kit |
Important compatibility info
| Surface | Coated |
| Number of Holes | 5 |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 68 mm |
| Minimum thickness | 20.0 mm |
| Outer diameter | 322 mm |
| Height | 61.1 mm |
| Rotor Style | Vented |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 22 mm |
| Inspection Tag | ECE R90 Homologated |
| Number of mounting bores | 1 |
Important compatibility info
| Water Pump Pulley Diameter | 70 mm |
| Impeller Diameter | 60 mm |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 40 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 36 |
| Length | 593 mm |
Additional Information
- 1x Borg & Beck Joint Kit, drive shaft (BCJ1392)
Important compatibility info
| Hub Profile | 22.4 x 20 |
| Outer diameter | 200 mm |
| Function | Clutch Kit |
| Number of Parts | 2 -part |
| Type | Clutch Kit |
| Number of Teeth | 20 |
Important compatibility info
| Function | Suspension Strut Support Mount |
| Additional Information 2 | with bearing |
| Paired article numbers | FSM5464 |
| Type | Suspension Strut Support Mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Surface | Coated |
| Function | Brake Disc |
| Centering Diameter | 93 mm |
| Minimum thickness | 30.0 mm |
| Number of Holes | 5 |
| Outer diameter | 308 mm |
| Height | 55.4 mm |
| Rotor Style | Vented |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 33 mm |
| Quantity | 1 |
Important compatibility info
| Diameter | 24 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA6781 |
| Placement on Vehicle | Front Axle Left, Lower |
Important compatibility info
| Number of Teeth | 18 |
| Hub Profile | 20.8 x 18.3 |
| Outer diameter | 228 mm |
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
Important compatibility info
| Diameter | 74 mm |
| for OE number | 11510393340 |
| Water Pump Pulley Diameter | 65 mm |
| Number of mounting holes at thermostat housing | 4 |
| Additional Information | with gaskets/seals |
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Pipe Diameter | 42 mm |
| Function | Tie Rod |
| Type | Tie Rod |
| Length | 840 mm |
Important compatibility info
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 50 mm |
| Rod/Strut | Push Rod |
| Thread Measurement 2 | M24X1.5 |
| Thread Measurement 1 | M30X1.5 RHT |
| Length | 915 mm |
Important compatibility info
| Type | Centre Rod Assembly |
| Pipe Diameter | 50 mm |
| Rod/Strut | Push Rod |
| Thread Measurement 2 | M18X1.5 |
| Thread Measurement 1 | M28C1.5 RHT |
| Function | Centre Rod Assembly |
| Length | 891 mm |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA7021 |
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA5945 |
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Upper Right |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.1 kW |
| Number of mounting bores | 2 |
| Number of Thread Bores | 1 |
| Function | Starter |
| Type | Starter |
Important compatibility info
| Number of Parts | 3 -part |
| Hub Profile | 20 x 18 |
| Outer diameter | 190 mm |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Replaced by | HK6632 |
Important compatibility info
| Function | Drive Shaft |
| Length | 1072 mm |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 37 |
| Number of Teeth, ABS ring | 54 |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 604 mm |
| External Teeth, Wheel Side | 26 |
| External Teeth, Diff.Side | 26 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 912 mm |
| External Teeth, Wheel Side | 25 |
| External Teeth, Diff.Side | 23 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 687 mm |
| External Teeth, Wheel Side | 27 |
| External Teeth, Diff.Side | 25 |
| Number of Teeth, ABS ring | 46 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Function | Water Pump, engine cooling |
| Type | Water Pump, engine cooling |
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Length | 535 mm |
| External Teeth, Wheel Side | 36 |
| Diameter 2 | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Important compatibility info
| Function | Water Pump, engine cooling |
| Housing material | Aluminium |
| Impeller Diameter | 58 mm |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | FCA5944 |
| Placement on Vehicle | Front Axle Right, Lower |
Important compatibility info
| Number of Teeth | 24 |
| Hub Profile | 25.6 x 23 |
| Outer diameter | 240 mm |
| Function | Clutch Kit |
| Number of Parts | 3 -part |
| Type | Clutch Kit |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Placement on Vehicle | Front Axle |
| Number of Holes | 5 |
| Rotor Style | Vented |
| Outer diameter | 300 mm |
| Height | 43 mm |
| Minimum thickness | 28 mm |
| Centering Diameter | 71 mm |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Brake Disc Thickness | 30 mm |
| Quantity | 1 |
Important compatibility info
| Inner diameter | 18 mm |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Length | 130 mm |
| Placement on Vehicle | Right Front |
Important compatibility info
| Rotor Style | Vented |
| Inspection Tag | ECE R90 Homologated |
| Function | Brake Disc |
| Quantity Unit | Set |
| Centering Diameter | 72 mm |
| Minimum thickness | 22 mm |
| Number of Holes | 4 |
| Outer diameter | 258 mm |
| Brake Disc Thickness | 24 mm |
| Height | 48.5 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Replaces | BBD4272 |
| Placement on Vehicle | Front Axle |
| Number of mounting bores | 4 |
Important compatibility info
| Number of Parts | 3 -part |
| Number of Teeth | 24 |
| Hub Profile | 25.6 x 23.1 |
| Outer diameter | 240 mm |
| Function | Clutch Kit |
| Engine Version | for engines with dual-mass flywheel |
| Type | Clutch Kit |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Rotor Style | Vented |
| Outer diameter | 340 mm |
| Function | Brake Disc |
| Centering Diameter | 112 mm |
| Minimum thickness | 29 mm |
| Brake Disc Thickness | 32 mm |
| Height | 68.4 mm |
| Number of Holes | 6 |
| Placement on Vehicle | Front Axle |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Number of mounting bores | 2 |
Important compatibility info
| Length | 895.5 mm |
| Thread Measurement 2 | M18X1.5 |
| Rod/Strut | Push Rod |
| Pipe Diameter | 40 mm |
| Thread Measurement 1 | M30X1.5 |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rotation Direction | Clockwise rotation |
| Rated Power | 1.1 kW |
| Number of mounting bores | 2 |
| Number of Thread Bores | 1 |
| Function | Starter |
| Manufacturer Restriction | Bosch |
| Type | Starter |
Important compatibility info
| Type | Centre Rod Assembly |
| Thread Measurement 1 | M30X1.5 |
| Thread Measurement 2 | M20X1.5 |
| Length | 879 mm |
| Function | Centre Rod Assembly |
| Pipe Diameter | 50 mm |
| Rod/Strut | Push Rod |
Important compatibility info
| Hub Profile | 22.1 x 20.3 |
| Number of Parts | 3 -part |
| Outer diameter | 228 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Number of Teeth | 28 |
Important compatibility info
| Number of Parts | 3 -part |
| Number of Teeth | 28 |
| Hub Profile | 22.2 x 20.3 |
| Outer diameter | 230 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
| Replaces | HK2030 |
Important compatibility info
| Number of Teeth | 26 |
| Number of Parts | 2 -part |
| Hub Profile | 29 x 26.7 |
| Outer diameter | 240 mm |
| Engine Version | for engines with dual-mass flywheel |
| Function | Clutch Kit |
| Type | Clutch Kit |
Important compatibility info
| Inspection Tag | ECE R90 Homologated |
| Surface | Coated |
| Outer diameter | 365 mm |
| Function | Brake Disc |
| Centering Diameter | 79 mm |
| Minimum thickness | 17 mm |
| Number of Holes | 5 |
| Rotor Style | Vented |
| Brake Disc Thickness | 20 mm |
| Height | 59 mm |
| Type | Brake Disc Rotor |
| Quantity | 1 |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 2 |
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































