Switches and Sensors Switches and Sensors
Fits PEUGEOT 307 (3A/C) 1.6 HDi 110
(2004)

This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
for RPO number from: 11319
Length 53 mm
Width 48 mm
Number of Connectors / Ports 3
Function Sensor, crankshaft pulse
Type Sensor, crankshaft pulse

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Blue Print ADB117207 RPM / Crankshaft Sensor
ONLY
£13.31
Quantity:
Part number: ADB117401
Function Mass Air Flow Sensor
Resistor Type Hot-film Sensor
Number of Connectors / Ports 5
Material Plastic
Type Mass Air Flow Sensor
Housing Type with housing
Additional Information 2 Control Unit/Software must be trained/updated

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Blue Print ADB117401 Air Mass Sensor
ONLY
£90.51
Quantity:
Part number: ADB117403
Number of Connectors / Ports 3
Function Sensor, intake manifold pressure
Colour Black
Type Sensor, intake manifold pressure

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Blue Print ADB117403 MAP Sensor
ONLY
£30.87
Quantity:
Number of Connectors / Ports 3
Function Sensor, camshaft position
Length 56 mm
Type Sensor, camshaft position
Outer diameter 11 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Blue Print ADJ137211 Camshaft Position Sensor
ONLY
£14.26
Quantity:
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Transmission Type: Manual Transmission; Transmission ID: BE4R
for OE number 2257.59
Function Switch, reverse light
Number of Connectors / Ports 2
Colour Grey
Spanner Size 22
External Thread Size M14 x 1,5
Type Switch, reverse light

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Blue Print ADK81447 Reverse Light Switch
ONLY
£9.38
Quantity:
Length 53 mm
Width 48 mm
Function Sensor, crankshaft pulse
Number of Connectors / Ports 3
Type Sensor, crankshaft pulse
Replaces ADJ137217

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Blue Print ADM57214 RPM / Crankshaft Sensor
ONLY
£14.51
Quantity:
Function Sensor, intake air temperature
Number of Connectors / Ports 2
Colour Black
Type Sensor, intake air temperature

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Blue Print ADT37239 Air Intake Temperature Sensor
ONLY
£15.21
Quantity:
Part number: 0273014059
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: 9HY (DV6TED4); Engine Code: 9HZ (DV6TED4); Construction Year from: 06/2005; Construction Year to: 12/2008
Replaces F026C00469
Frequency Range 433 MHz
Material Rubber
Colour black
Type Wheel Sensor, tyre-pressure monitoring system
Function Wheel Sensor, tyre-pressure monitoring system

Additional Information

TPMS SNAP IN RUBBER VALVE (BLACK)
  • Over 90% vehicle coverage with just four part numbers
  • Function and quality tests according to the same standards as original equipment
  • Single frequency 433 MHz
  • Endlessly programmable
  • Up to 10 years battery lifetime
  • All valves pre-mounted
  • Light weight housing design
  • Compatible with Bosch TPA 300 and other major programming tools
  • CE
Bosch 0273014059 Tyre Pressure Sensor
ONLY
£32.30
Quantity:
Part number: 0273014060
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: 9HY (DV6TED4); Engine Code: 9HZ (DV6TED4); Construction Year from: 06/2005; Construction Year to: 12/2008
Replaces F026C00466
Colour silver
Material Steel
Frequency Range 433 MHz
Type Wheel Sensor, tyre-pressure monitoring system
Function Wheel Sensor, tyre-pressure monitoring system
Title Bosch Clamp-in Metal Valve Silver

Additional Information

TPMS CLAMP-IN METAL VALVE (SILVER)
  • Over 90% vehicle coverage with just four part numbers
  • Function and quality tests according to the same standards as original equipment
  • Single frequency 433 MHz
  • Endlessly programmable
  • Up to 10 years battery lifetime
  • All valves pre-mounted
  • Light weight housing design
  • Compatible with Bosch TPA 300 and other major programming tools
  • CE
Bosch 0273014060 Tyre Pressure Sensor
ONLY
£32.30
Quantity:
Part number: 0273014061
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Engine Code: 9HY (DV6TED4); Engine Code: 9HZ (DV6TED4); Construction Year from: 06/2005; Construction Year to: 12/2008
Replaces F026C00468
Frequency Range 433 MHz
Colour black
Material Steel
Type Wheel Sensor, tyre-pressure monitoring system
Function Wheel Sensor, tyre-pressure monitoring system

Additional Information

TPMS CLAMP-IN METAL VALVE (BLACK)
  • Over 90% vehicle coverage with just four part numbers
  • Function and quality tests according to the same standards as original equipment
  • Single frequency 433 MHz
  • Endlessly programmable
  • Up to 10 years battery lifetime
  • All valves pre-mounted
  • Light weight housing design
  • Compatible with Bosch TPA 300 and other major programming tools
  • CE
Bosch 0273014061 Tyre Pressure Sensor
ONLY
£32.30
Quantity:

Page 1 of 13
Switches and Sensors

What are car switches and sensors?

Sensors for cars are devices that detect changes or variations in the environment or function of a vehicle and transmit this information to the car's computer system. Switches and sensors play a critical role in maintaining vehicle performance, improving fuel efficiency, and ensuring safe driving conditions.

There are many different types of sensors used in modern cars, each with its own unique function.

Some of the most common sensors are:

  • Oxygen sensors (Lambda Sensors): Monitor the levels of oxygen in the exhaust system to optimise fuel efficiency and reduce emissions

  • Mass airflow sensors: Measure the amount of air entering the engine and adjust fuel delivery accordingly

  • Air temperature sensors: Provides the engine control unit with an important measurement for correcting the mixture formation and the ignition

  • Fuel pressure sensors: This sensor sends this signal to the engine control unit, which then uses it to adjust the vehicle's fuel and timing settings

  • Oil pressure sensors: In the event of a low or no oil situation this sensor gives you enough warning to shut your engine off before any damage is caused


How do I choose the correct switches and sensors?

There are different compatibility factors to consider when finding the correct switch or sensor for your vehicle. The surest way to obtain the correct part is to cross reference the part number from the part that you need to replace.

It is not alway possible or convenient to obtain the part number from the old part so we would advise looking out for the following factors:

  • The year the vehicle was manufactured. This is not to be confused with the registration date

  • List of features the switch is listed for

  • Location of the sensor (i.e. after catalytic converter or before turbo etc)

  • Colour or shape of the connector

  • Number of wires in the connector


What brand of switch or sensor should I choose?

There are many aftermarket makers of switches and sensors and it can be difficult to know which brand you should buy. Very often the choice of which manufacture to choose is a budget led decision. All of the switches and sensors we stock come with a 1 to 3 year warranty depending on the brand. A part with a longer warranty can offer more peace of mind.


How can I tell my switch or sensor needs replacing?

We would always recommend that you have a qualified mechanic diagnose any issues you have with your vehicle. Some of the symptoms of a faulty switch or sensor are:

  • The switch does not activate the required device

  • There is a sensor error detected by a OBDII scanner

  • Your vehicle is showing the engine management light or some other error notice on the dashboard

  • The engine is not running correctly (misfire or poor performance)


Your feedback more
Trusted reviews more
Secure payments more
Simple returns more