Proud to be a UK-based company
Contact usShock Absorbers 
Fits VW POLO V (6R1, 6C1) 1.0 TSI
(2014)
invoice Page 1 of 2
Results 1 - 20 of 30
Part number: ASA1036
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Fitting Position: Rear Axle Left; Fitting Position: Rear Axle Right; Suspension: for vehicles without electronic suspension control; Suspension: for vehicles with bad road version
| Length 1 | 648 mm |
| Length 2 | 398 mm |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Diameter | 38 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Height | 640 mm |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Shock Absorber System | Twin-Tube |
| Compression Height | 398 mm |
ONLY
£41.92
£41.92
Part number: ASA1160
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Fitting Position: Front Axle; Suspension: for vehicles without electronic suspension control; Suspension: for vehicles with standard suspension; Suspension: for vehicles with increased ground clearance; Suspension: for vehicles with bad road version
| Shock Absorber Mounting Type | Top pin |
| Placement on Vehicle | Front Axle |
| Diameter | 50 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Type | Shock Absorber |
| Height | 512 mm |
| Shock Absorber Design | Suspension Strut |
| Function | Shock Absorber |
| Manufacturer | SEAT SKODA VOLKSWAGEN |
| Model | FABIA IBIZA POLO RAPID TOLEDO |
| Compression Height | 358 mm |
ONLY
£75.84
£75.84
Part number: ASA1291
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Fitting Position: Front Axle; Suspension: for vehicles without electronic suspension control; Suspension: for vehicles with sports suspension
| Diameter | 50 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Top pin |
| Shock Absorber Design | Suspension Strut |
| Placement on Vehicle | Front Axle |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber System | Twin-Tube |
| Height | 512 mm |
| Manufacturer | AUDI SEAT VOLKSWAGEN |
| Model | A1 IBIZA POLO |
| Compression Height | 356 mm |
ONLY
£84.19
£84.19
Part number: ASA1544
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Fitting Position: Rear Axle Left; Fitting Position: Rear Axle Right; Suspension: for vehicles without electronic suspension control; Suspension: for vehicles with standard suspension; Suspension: for vehicles with sports suspension
| Function | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Type | Shock Absorber |
| Shock Absorber System | Monotube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Model | A2 FABIA IBIZA POLO |
ONLY
£51.28
£51.28
Part number: ASA1607
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Fitting Position: Rear Axle Left; Fitting Position: Rear Axle Right; Suspension: for vehicles without electronic suspension control; Suspension: for vehicles with standard suspension
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Manufacturer | AUDI SEAT SKODA VOLKSWAGEN |
| Model | A2 CORDOBA FABIA FOX IBIZA POLO |
ONLY
£68.70
£68.70
Part number: MA-01028
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Suspension: for vehicles with sports suspension; Suspension: for vehicles without heavy duty suspension; Suspension: for vehicles without bad road version; not for vehicle type: GTi, WRC, Cross Polo
| Part number of recommended accessories | SMA0144 |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin |
| Type | Shock Absorber |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Function | Shock Absorber |
| for OE number | 6C0413031AH |
ONLY
£102.29
£102.29
Part number: 180082
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Suspension: for vehicles without sports suspension; Suspension: for vehicles without electronic suspension control
| for OE number | 3C0 513 425 S3 |
| Placement on Vehicle | Rear Axle |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (22142)
- 2x Febi Rubber Buffer, suspension (23410)
ONLY
£20.20
£20.20
Part number: 22142
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Suspension: for vehicles with sports suspension; Suspension: for vehicles without electronic suspension control; for PR number: 1JS
| Function | Protective Cap/Bellow, shock absorber |
| Material | PP (Polypropylene) |
| Width | 59 mm |
| Placement on Vehicle | Rear Axle |
| Thickness | 180 mm |
| Type | Protective Cap/Bellow, shock absorber |
| Replaces | 19288; 38358; 38637 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£6.27
£6.27
Part number: 39249
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Suspension: for vehicles with sports suspension; Suspension: for vehicles without electronic suspension control; for PR number: 1JK
| Placement on Vehicle | Rear Axle |
| Length | 185 mm |
| Material | Thermoplast |
| Function | Protective Cap/Bellow, shock absorber |
| Type | Protective Cap/Bellow, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
ONLY
£5.50
£5.50
Part number: 339741
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Suspension: for vehicles with sports suspension; Suspension: for vehicles without electronic suspension control
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
ONLY
£130.22
£130.22
Part number: 339763
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Suspension: for vehicles with standard suspension; Suspension: for vehicles with bad road version; Suspension: for vehicles with increased ground clearance; Suspension: for vehicles without electronic suspension control
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
| Replaces | 334969 |
ONLY
£110.31
£110.31
Part number: 343328
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
not for vehicle equipment line/variant: Polo Cross; Suspension: for vehicles with standard suspension; Suspension: for vehicles without electronic suspension control
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Placement on Vehicle | Rear Axle |
| Length 1 | 632 mm |
| Length 2 | 385 mm |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
Please refer to the technical drawing in "Documents"
ONLY
£66.37
£66.37
Part number: 343348
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
not for vehicle equipment line/variant: Polo Cross; Suspension: for vehicles with bad road version; Suspension: for vehicles without electronic suspension control; or; Vehicle Equipment Line/Variant: Polo Cross
| Length 2 | 400 mm |
| Length 1 | 648 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Function | Shock Absorber |
| Extra Description | Excel-G |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
Please refer to the technical drawing in "Documents"
ONLY
£65.06
£65.06
Part number: 353025
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
not for vehicle equipment line/variant: Polo Cross; Suspension: for vehicles with standard suspension; Suspension: for vehicles without electronic suspension control
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Function | Shock Absorber |
| Extra Description | Ultra SR |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
ONLY
£84.52
£84.52
Part number: 552700
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
not for vehicle equipment line/variant: Polo Cross; Suspension: for vehicles with standard suspension; Suspension: for vehicles with sports suspension; Suspension: for vehicles without electronic suspension control
| Shock Absorber Design | Telescopic Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Shock Absorber System | Monotube |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Rear Axle |
| Extra Description | Gas A Just |
| Type | Shock Absorber |
ONLY
£80.22
£80.22
Part number: 910154
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Front Axle |
| Type | Dust Cover Kit, shock absorber |
| Extra Description | Protection Kit |
ONLY
£19.96
£19.96
Part number: 915400
Important compatibility info
| Replaces | 910094 |
| Function | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle |
| Extra Description | Protection Kit |
| Type | Dust Cover Kit, shock absorber |
ONLY
£22.16
£22.16
Part number: NSA1034
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Fitting Position: Rear Axle Left; Fitting Position: Rear Axle Right; Suspension: for vehicles without electronic suspension control; Suspension: for vehicles with standard suspension
| Compression Height | 388 mm |
| Shock Absorber System | Twin-Tube |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Diameter | 38 mm |
| Shock Absorber Type | Gas Pressure |
| Height | 632 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Length 1 | 632 mm |
| Length 2 | 388 mm |
ONLY
£50.28
£50.28
Part number: NSA1036
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Fitting Position: Rear Axle Left; Fitting Position: Rear Axle Right; Suspension: for vehicles without electronic suspension control; Suspension: for vehicles with bad road version
| Function | Shock Absorber |
| Compression Height | 398 mm |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Shock Absorber Type | Gas Pressure |
| Diameter | 38 mm |
| Type | Shock Absorber |
| Height | 640 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Shock Absorber System | Twin-Tube |
| Length 1 | 648 mm |
| Length 2 | 398 mm |
ONLY
£46.85
£46.85
Part number: NSA1160
This part is listed as correct for your however this is subject to the 'Important Compatibility Info'
Important compatibility info
Fitting Position: Front Axle; Suspension: for vehicles without electronic suspension control; Suspension: for vehicles with standard suspension; Suspension: for vehicles with increased ground clearance; Suspension: for vehicles with bad road version
| Height | 512 mm |
| Function | Shock Absorber |
| Compression Height | 358 mm |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Diameter | 50 mm |
| Placement on Vehicle | Front Axle |
| Type | Shock Absorber |
| Shock Absorber Mounting Type | Top pin |
ONLY
£82.25
£82.25
Page 1 of 2
Shock Absorbers
What are shock absorbers?
Shock absorbers are tubular devices that contain a piston with either gas or oil that help control the compression and the rebound of a suspension spring. The control of the compression and rebound of the suspension spring is essential for ensuring the tyre remains in contact with the road which affects steering, vehicle handling and braking performance. All of these factors contribute to the vehicle safety.
There are different types of shock absorber:
These are:
Standard shock absorber
Strut
Coil over
How do I choose the correct shock absorbers?
Suspension systems are often upgraded at the factory by the manufacturer depending on the specification or features of the vehicle. You will need to know if your vehicle has any upgrades to make sure you get the correct parts. We recommend that you take note if there are compatibility notes listed next to a part that is shown as correct for your vehicle.
These may include:
Standard suspension
Sport suspension (this include variations such as S-Line, M-Tec, Sports Pack etc)
Self levelling
Heavy duty (extra load)
What brand of shock absorbers should I choose?
Budget and quality are two of the main factors when choosing the correct replacement parts. Some brands such as Sachs and KYB manufacture shock absorbers for the original car brands however there are other brands that offer a great alternative. Manufacturers such as Febi, Napa and Apec offer long warranties which shows their quality and that they have confidence in their products.
How can I tell my shock absorbers needs replacing?
If you have issues with your suspension we would recommend that you have your vehicle inspected by a qualified mechanic to receive an accurate diagnosis.
Some of the symptoms of failing shock absorbers are:
Shock absorber is leaking fluid
Uneven or excessive tyre wear
The vehicle suffers excessive bouncing
Driving is unstable at high speeds
Vehicle front pitches up or the rear squats when accelerating
Front of the vehicle dips low when braking
