Workshop Tools

• Strong magnet at start of the tape allows easy hooking onto flat surfaces and round pipe.
• Anti-tear coating reinforces the first 15 cm of the blade.
• Class II accuracy.
• Tool lanyard hole Ready for quick and easy tethering.
• Patented finger stop protects fingers from blade retraction.
• Wire form belt clip reduces pocket tearing.
• 2 sided blade printing increases the readability.
• ABS housing with impact resistant overmold for more comfort and jobsite durability.
• EXO 360 blade technology delivers long lasting rip and wear resistance.
• Up to 4 m standout higher standout for higher efficiency and higher reach.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.
• Flexible material allows for easy install and removal.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.

• Manufactured from Chrome Molybdenum
• Available in range 22mm - 70mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 1in. drive

• Manufactured from Chrome Molybdenum
• Available in range 22mm - 70mm
• Deep Impact socket
• Part of a range of Deep Impact Sockets in 1in. drive

• Provides evidence to justify their content (for lease company audit etc)
• Time saver - ensures more accurately quote without needing to remove the wheels or strip the brakes first
• Quick and simple to use.
• Fits easily to most existing digital vernier.
• Designed to measure the thickness of the brake discs with the wheels still on the vehicle.

General Information

Plastic 6mm Chain 25mtrs. Plastic 6mm Chain 25mtrs

• Chain size 6mm x 25mtrs
• Red and White for high visibility
• Use with Laser Posts and Bases - Part 6643/6644

• Personalized Foam Tray
• 90-Degree Tip Angle with 0.090in./2.3 Tip Size, Fits 31 - 82mm Circlip Sizes
• 90-Degree Tip Angle with 0.070in./1.8 Tip Size, Fits 18 - 48mm Circlip Sizes
• 90-Degree Tip Angle with 0.047in./1.2 Tip Size, Fits 12 - 25mm Circlip Sizes
• 90-Degree Tip Angle with 0.038in./1.0 Tip Size, Fits 8 - 18mm Circlip Sizes
• Ergonomic Handle for Added Leverage and Comfort
• Handles Internal and External Circlips
• Heat-Treated for Strength and Durability
• Chrome Molybdenum Steel

General Information

Torch with Heat Shrink Tubing Set 162pc Torch with Heat Shrink Tubing Set 162pc.

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• QUAD EDGE™ Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
• Impact rated drill bit with ¼″ hex shank optimised for impact drivers.

• Lanyard hole.
• 8? adjustable wrench (48227508) has an extra wide jaw of 38 mm for increased jaw capacity in confined environments.
• Permanent lasered inch and mm markings for accurate adjustment
• Parallel jaws won't slip or damage finish surfaces.
• Slim head design for reaching into tight spaces.
• Ergonomic rounded handle design for a comfortable fit in the hand and less pressure points on the palm.
• Chrome plating for best-in-class rust protection and increased durability.
• Precision adjustment screw with accurate threads and tight tolerances. The jaws won't back off during use.

• Chrome alloy steel, chrome plated.
• Ink-filled labels for better visibility.
• Rounded I-Beam handle for comfortable handling grip.
• MAX BITE™ open-end grip reduces rounding and stripping.
• Durable double stacked pawls for longer ratchet life.
• 144 Ratcheting teeth positions giving 2.5° arc swing allowing access in tighter spaces.

• Dual hole design and groove for security accessories.
• Stamped and ink filled diameter markings and laser etched part number for wear resistance.
• Non-slip hex geometry to prevent socket and fastener rounding.
• Best fitting thanks to 6 gripping points.
• SHOCKWAVE IMPACT DUTY steel (Chrome-Molybdenum) is high quality alloy steel which provides ultimate strength and durability.

• Motorcycle fork oil level adjuster
• Syringed hollow filler
• Aluminium level adjuster
• A quick and accurate way of setting and adjusting fork oil levels
• Quick and accurate
• Time saver

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• 180° swiveling head.
• Provides Extra leverage for tougher bolts.

• Total length (mm): 610

• Use on any other product than advised may result in damage to tool motor and may void tool warranty.
• Not for use on or near live electrical circuits.
• Durable proprietary rubber designed to withstand corrosive materials commonly found in maintenance environments.
• Flexible material allows for easy install and removal.
• Form-fitting, lightweight design protects the tool and work surface while adding minimal size or weight to the tool.

• They are used as a general-purpose soft-faced hammer in automotive and general engineering for assembly, repair and maintenance
• These copper hammers have faces that are designed to wear and can be easily replaced as spare faces are available
• Ideal where a heavy blow is required combined with a relatively small striking area
• The malleable Iron head provides the weight for the blow and the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage
• Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft

• Weight: 1975g

• High quality hot-forging process provides a performance exceeding ASME standard
• Longer beam provides more torque during use
• Patented anti-slip open end grasps nut tight, zero chamfer box end offer better bite on worn fasteners
• Premium Chrome Finish
• Anti-Slip open end
• Zero chamfer box end
• 9 to19mm

• ASME Compliant