Important compatibility info
| Function | Sensor Ring, ABS |
| Number of Teeth, ABS ring | 48 |
| Inner diameter | 92 mm |
| Outer diameter | 96 mm |
| Material | Steel |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 51 mm |
| Width | 40.5 mm |
| Outer diameter | 12 mm |
| Thickness | 45.5 mm |
| Number of Connectors / Ports | 2 |
| Function | Switch, reverse light |
| Type | Switch, reverse light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 5 mm |
| Outer diameter | 66 mm |
| Inner diameter | 58 mm |
| Bearing Type | Needle Bearing |
| Function | Bearing, automatic transmission |
| Type | Bearing, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Width | 4.1 mm |
| Outer diameter | 52 mm |
| Inner diameter | 33 mm |
| Bearing Type | Needle Bearing |
| Function | Bearing, automatic transmission |
| Type | Bearing, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 99 mm |
| Function | Suspension Spring |
| Length | 336 mm |
| Wire Diameter | 14 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40342 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (14522)
- 2x Febi Camber Correction Screw (07758)
- 1x Febi Bolt, control arm (11154)
- 1x Febi Nut, exhaust manifold (01554)
- 1x Febi Nut (06877)
- 1x Febi Nut (22263)
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40341 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (14523)
- 2x Febi Camber Correction Screw (07758)
- 1x Febi Bolt, control arm (11154)
- 1x Febi Nut, exhaust manifold (01554)
- 1x Febi Nut (06877)
- 1x Febi Nut (22263)
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 15 mm |
| Thickness | 2.5 mm |
| Inner diameter | 10 mm |
| Function | Seal, fuel line |
| Type | Seal, fuel line |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Rims | for steel rims |
| Screw length below head | 20 mm |
| Outer diameter | 23 mm |
| Function | Wheel Bolt |
| Wheel Fastening | Ball seat A/G |
| Quality/ Grade | 10.9 |
| Bolt Head/Nut Design | External Hexagon |
| Thread Length | 19 mm |
| Surface | Zink flake coated |
| Spanner Size | 17 |
| Material | Steel |
| Length | 40 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Type | Wheel Bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 8 mm |
| Thickness | 12.5 mm |
| Function | Hydraulic Filter Kit, automatic transmission |
| Transmission Type | Automatic Transmission |
| Type | Hydraulic Filter Kit, automatic transmission |
| Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Bolt Head/Nut Design | Hexagon Socket |
| Function | Screw Plug, oil sump |
| Length | 17 mm |
| External Thread Size | M26 x 1,5 |
| Screw length below head | 14 mm |
| Type | Screw Plug, oil sump |
| Additional Information 2 | without seal ring |
| Quality/ Grade | 6.8 |
| Thread Length | 12 mm |
| Material | Steel |
| Surface | Zinc-coated |
| Spanner Size | 15 |
| Outer diameter | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 33 mm |
| Material | Steel |
| Outer diameter | 18.85 mm. 19 mm |
| Spanner Size | 13 |
| Thread Length | 20 mm |
| Bolt Head/Nut Design | External Hexagon |
| Quality/ Grade | 8.8 |
| Function | Screw Plug, oil sump |
| External Thread Size | M14 x 1,5 |
| Screw length below head | 24 mm |
| Type | Screw Plug, oil sump |
| Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 59 mm |
| Thickness | 2.3 mm |
| Inner diameter | 47.1 mm |
| Function | Seal, oil filler neck cap |
| Type | Seal, oil filler neck cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, housing cover (crankcase) |
| Type | Gasket, housing cover (crankcase) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Gasket, intake manifold housing |
| Type | Gasket, intake manifold housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Selector-/Shift Rod |
| Extra Description | febi Plus |
| Type | Selector-/Shift Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 150 mm |
| Number of circuits | 1 |
| Function | Cable Repair Kit, glow plug |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, glow plug |
| Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Cable Length | 200 mm |
| Bulb Type | H7 |
| Number of circuits | 2 |
| Function | Cable Repair Kit, headlight |
| Extra Description | febi Plus |
| Base design light bulb | PX26d |
| Type | Cable Repair Kit, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Thread Length | 4 mm |
| Type | Screw Plug, automatic transmission casing |
| Function | Screw Plug, automatic transmission casing |
| External Thread Size | M8 x 1 |
| Additional Information 2 | with seal ring |
| Length | 9.5 mm |
| Screw length below head | 7.5 mm |
| Bolt Head/Nut Design | Hexagon Socket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Brake System | ATE |
| Brake Type | Disc Brake |
| Type | Accessory Kit, disc brake pad |
| Placement on Vehicle | Front Axle |
| Function | Accessory Kit, disc brake pad |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Function | Mounting, stabiliser bar |
| Inner diameter | 17.6 mm |
| Type | Mounting, stabiliser bar |
| Thickness | 36 mm |
| Length | 36 mm |
| Width | 25 mm |
| Material | Rubber with fabric lining |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Height | 7 mm |
| Material | PU (Polyurethane) |
| Outer diameter | 17 mm |
| Inner diameter | 9 mm |
| Type | Bush, shift rod |
| Function | Bush, shift rod |
| Replaces | 07662 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Paired article numbers | 196900 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 196898 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Rear, outer |
| Inner diameter | 15 mm |
| Outer diameter | 40 mm |
| Height | 48 mm |
| Function | Mounting, wheel bearing housing |
| Type | Mounting, wheel bearing housing |
| Replaces | 02354 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | transmission sided |
| Width | 165 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Inner diameter | 93 mm |
| Outer Length | 135 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
| Thickness | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 126 mm |
| Height | 126 mm |
| Outer diameter | 21 mm. 60 mm. 72 mm. 82 mm. 83 mm |
| Function | Bellow Kit, drive shaft |
| Placement on Vehicle | Front Axle, Rear Axle |
| Material | Rubber |
| Type | Bellow Kit, drive shaft |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Outer diameter | 67 mm |
| Placement on Vehicle | frontal sided |
| Thickness | 8 mm |
| Inner diameter | 45 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| for OE number | 120 997 03 46 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 59 mm |
| Width | 39.5 mm |
| Material | PA (polyamide) |
| Thickness | 20.3 mm |
| Number of Connectors / Ports | 2 |
| Function | Switch, reverse light |
| Type | Switch, reverse light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length from grip collar to min. marking | 1144 mm. 1095 mm |
| Length from grip collar to max. marking | 1133 mm. 1089 mm |
| Function | Oil Dipstick, automatic transmission |
| Extra Description | febi Plus |
| Additional Information 2 | with bolts |
| Type | Oil Dipstick, automatic transmission |
| Colour | Red |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Dipstick, automatic transmission (38023)
- 5x Febi Locking Pin, auto. trans. dipstick sealing piece (44204)
Important compatibility info
| Height | 167 mm |
| Filter type | Filter Insert |
| Function | Oil Filter |
| Gasket outer diameter | 108.6 mm |
| Gasket inner diameter | 100 mm |
| Type | Oil Filter |
| Outer diameter | 91 mm |
| Inner diameter | 12 mm. 26 mm |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Replaces | 41066 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Number of Connectors / Ports | 2 |
| Operating Mode | Electric |
| for OE number | 001 835 13 64 |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
| Width 2 | 17 mm |
| Outer diameter 2 | 60 mm |
| Width 1 | 17 mm |
| Outer diameter 1 | 45 mm |
| Inner diameter 2 | 35 mm |
| Inner diameter 1 | 22 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (07871)
Important compatibility info
| Placement on Vehicle | frontal sided |
| Width | 12 mm |
| Outer diameter | 67 mm |
| Thickness | 8 mm |
| Inner diameter | 45 mm |
| Function | Shaft Seal, crankshaft |
| Additional Information 2 | with mounting sleeve |
| Type | Shaft Seal, crankshaft |
| for OE number | 023 997 84 47 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 98 mm |
| Thickness | 16.6 mm. 9.5 mm |
| Inner diameter | 46 mm |
| Function | Shaft Seal, differential |
| Type | Shaft Seal, differential |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Length | 51.5 mm |
| Outer diameter | 31 mm |
| Function | Centering Sleeve, propshaft |
| Type | Centering Sleeve, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Material | Copper |
| Outer diameter | 32 mm |
| Thickness | 1.5 mm |
| Inner diameter | 26 mm |
| DIN / ISO | 7603 |
| Function | Seal Ring, oil drain plug |
| Type | Seal Ring, oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Rod/Strut | Pull Rod |
| Extra Description | ProKit |
| Function | Rod/Strut, wheel suspension |
| Additional Information | with fastening/mounting material |
| Type | Rod/Strut, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (17265)
- 1x Febi Washer (08375)
- 1x Febi Screw (17277)
- 1x Febi Screw (17274)
- 2x Febi Nut (21055)
- 1x Febi Washer (17278)
Important compatibility info
| Material | Rubber, Rubber with fabric lining |
| Inner diameter | 26 mm |
| Placement on Vehicle | Front Axle |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Lock Cylinder |
| Lock System | with two keys |
| Type | Lock Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Lock Cylinder, ignition lock |
| Lock System | with two keys |
| Type | Lock Cylinder, ignition lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Additional Information 2 | with switch, with bolts/screws |
| Function | Steering Lock |
| Type | Steering Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Extra Description | febi Plus |
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
| Lock System | with two keys |
| for OE number | 1H0 905 855 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
| Lock System | with two keys |
| Extra Description | febi Plus |
| for OE number | 191 905 855 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Lock Cylinder, ignition lock |
| Type | Lock Cylinder, ignition lock |
| Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Function | Actuator, central locking system |
| Extra Description | febi Plus |
| Type | Actuator, central locking system |
| Placement on Vehicle | Front, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Actuator, central locking system |
| Extra Description | febi Plus |
| Type | Actuator, central locking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Mount, exhaust system |
| Type | Mount, exhaust system |
| Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
| Function | Hose, crankcase ventilation |
| Placement on Vehicle | Upper |
| Extra Description | febi Plus |
| Type | Hose, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023

















































