Important compatibility info
Weight | 0.88 kg |
Placement on Vehicle | Lower, Rear |
Length | 200 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Hose Length | 140 mm |
Material | MVQ (silicone rubber) |
Outer diameter | 97 mm |
Inner diameter | 89 mm |
Function | Charge Air Hose |
Weight | 0.235 kg |
Type | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 23284 |
Placement on Vehicle | Rear |
Weight | 0.776 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, automatic transmission |
Type | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Number of Teeth, ABS ring | 51 |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 28 |
Length | 167 mm |
Outer diameter | 101 mm |
Placement on Vehicle | Wheel Side, Front Axle |
Internal Teeth, wheel side | 36 |
Seal Diameter | 65 mm |
Weight | 3.3 kg |
External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 74.5 mm |
Weight | 0.231 kg |
Height | 112 mm |
Inner diameter | 19.7 mm |
Filter type | Filter Insert |
Type | Fuel filter set |
Function | Fuel filter set |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Height | 26 mm |
Outer diameter | 452 mm |
Weight | 0.80 kg |
Type | Cover Sheet, brake drum |
Function | Cover Sheet, brake drum |
Inner diameter | 226 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 175 mm |
Width | 85.5 mm |
Wear Warning Contact | prepared for wear warning indicator |
Weight | 4.3 kg |
Thickness/Strength 1 | 22 mm |
Function | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Placement on Vehicle | Front Axle, Rear Axle |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Glow Plug |
Mounting Type | Bolted |
Weight | 0.02 kg |
Spanner Size | 8 |
Fitting Depth | 28 mm |
External Thread Size | M8 x 1 |
Voltage | 11 V |
Length | 118.9 mm |
Glow Plug Type | after-glow capable |
Type | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.508 kg |
Type | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17.4 mm |
Placement on Vehicle | Rear Axle |
Length | 114.3 mm |
Width | 72.1 mm. 62.2 mm |
Additional Information 2 | with bolts/screws |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Extra Description | ProKit |
Additional Information 2 | with ball bearing, with fastening material |
Type | Repair Kit, suspension strut support mount |
Material | Rubber/Metal |
Weight | 0.429 kg |
Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (100702)
- 1x Febi Rolling Bearing, suspension strut support mount (183292)
- 3x Febi Screw (186445)
- 1x Febi Nut (37805)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 230 mm. 192 mm |
Thickness | 355 mm |
Function | Bellow, air suspension |
Weight | 1.8 kg |
Type | Bellow, air suspension |
Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.338 kg |
Function | Mounting Kit, stabiliser bar |
Inner diameter | 21 mm |
Placement on Vehicle | Front Axle |
External Thread Size | M8 x 1,25 |
Type | Mounting Kit, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Fastening Bolt, stabiliser bar (46148)
- 1x Febi Bracket, stabiliser mounting (40443)
- 1x Febi Bracket, stabiliser mounting (40444)
- 2x Febi Mounting, stabiliser bar (23902)
Important compatibility info
Mounting points diameter | 16.5 mm |
Weight | 0.211 kg |
Placement on Vehicle | both sides |
Length | 429 mm |
Housing Diameter | 18 mm |
Eject Force | 390 N |
Stroke | 168 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 239.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Weight | 0.664 kg |
Additional Information 2 | without ball bearing |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.338 kg |
Function | Mounting, control/trailing arm |
Inner diameter | 16 mm |
Thickness | 65 mm |
Outer diameter | 65 mm |
Material | Rubber/Metal |
Width | 51 mm |
Length | 65 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 107191 |
Cable Length | 1046 mm |
Number of Connectors / Ports | 2 |
Resistance | 1600 Ohm |
Placement on Vehicle | Front Axle Right |
Function | Sensor, wheel speed |
Weight | 0.190 kg |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 12 9 070 990 |
Weight | 0.25 kg |
Material | Rubber |
Function | Gasket Set, cylinder head cover |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 187.35 mm |
Width | 76 mm |
Additional Information 2 | with anti-squeak plate |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | R90 |
Weight | 1.980 kg |
Thickness/Strength 1 | 15.4 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.770 kg |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Material | PA (polyamide) |
Placement on Vehicle | Rear, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Length | 80 mm |
Outer diameter | 40 mm |
Spanner Size | 22 |
Type | Tensioner, timing chain |
Function | Tensioner, timing chain |
Operating Mode | Hydraulic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023