Important compatibility info
Weight | 0.218 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 187 mm |
Material | Rubber |
Function | Bellow Kit, steering |
Inner diameter 2 | 59 mm |
Inner diameter 1 | 16 mm |
Additional Information | with grease |
Additional Information 2 | with clamps |
Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (29206)
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38756)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.38 kg |
Placement on Vehicle | Front Axle Right |
Length | 285 mm |
Paired article numbers | 28671 |
Rod/Strut | Coupling Rod |
Thread Length | 26 mm |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M12 x 1,75 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.200 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 160 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5 kg |
Placement on Vehicle | Left Rear, Right Rear |
Length | 3070 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.480 kg |
Additional Information | with counter nut |
Length | 241 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
External Thread Size | M16 x 1,5, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.105 kg |
Function | Gasket Set, oil sump |
Seal Material | Cork |
Type | Gasket Set, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.064 kg |
Material | NBR (nitrile butadiene rubber) |
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with valve cover gasket |
Weight | 0.02 kg |
Material | Rubber |
Function | Gasket Set, cylinder head cover |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gasket, cylinder head cover (15196)
- 1x Febi Gasket Set, cylinder head cover (15192)
Important compatibility info
Weight | 0.244 kg |
Function | Hydraulic Filter, automatic transmission |
Width | 157 mm |
Length | 195 mm |
Type | Hydraulic Filter, automatic transmission |
Height | 21 mm |
Filter type | Screen Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.11 kg |
Placement on Vehicle | Right, outer, Lower |
Material | Rubber |
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Gasket inner diameter | 70 mm |
Function | Oil Filter |
Gasket outer diameter | 78 mm |
Type | Oil Filter |
Filter type | Filter Insert |
Weight | 0.078 kg |
Additional Information 2 | with seal ring |
Outer diameter | 64 mm |
Inner diameter | 32 mm |
Height | 123 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 143 mm |
Outer diameter | 56 mm |
Weight | 0.250 kg |
Filter type | In-Line Filter |
Function | Fuel filter |
Internal Thread Size | M14 x 1,5 |
Type | Fuel filter |
Pipe Diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Placement on Vehicle | Front Axle Left |
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Paired article numbers | 174216 |
Weight | 0.172 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.073 kg |
Placement on Vehicle | Rear Axle |
Material | PU (Polyurethane) |
Thickness | 112 mm |
Type | Rubber Buffer, suspension |
Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.146 kg |
Function | Coolant Flange |
Type | Coolant Flange |
Additional Information | with gasket/seal |
for OE number | 03L 121 132 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.255 kg |
Placement on Vehicle | Lower Front Axle |
Outer diameter | 64 mm |
Thickness | 48 mm |
Inner diameter | 16 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 22 mm |
Material | Plastic |
Outer diameter | 65 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
for OE number | 640 202 04 19 |
Weight | 0.104 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.39 kg |
Material | Metal |
Outer diameter | 130 mm |
Thickness | 26 mm |
Inner diameter | 12 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Rolling Bearing, suspension strut support mount |
Type | Rolling Bearing, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Splash Guard, brake disc |
Type | Splash Guard, brake disc |
Paired article numbers | 174213 |
Placement on Vehicle | Front Axle Right |
Weight | 0.172 kg |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.078 kg |
Length | 920 mm |
Type | Oil Dipstick, automatic transmission |
Function | Oil Dipstick, automatic transmission |
Extra Description | febi Plus |
Length from grip collar to max. marking | 790 mm |
Length from grip collar to min. marking | 845 mm |
Colour | Green |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.370 kg |
Additional Information | with rubber-metal mounts |
Placement on Vehicle | Front Axle |
Inner diameter | 12 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Link/Coupling Rod, stabiliser bar (12064)
- 2x Febi Bushing, stabiliser coupling rod (12065)
Important compatibility info
Weight | 0.216 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Aluminium |
Function | Wheel Brake Cylinder |
Piston Diameter | 20.6 mm |
Type | Wheel Brake Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber |
Function | Gasket, oil sump |
Weight | 0.05 kg |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.023 kg |
Function | Stop Light Switch |
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Type | Stop Light Switch |
for OE number | 001 545 67 09 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.51 kg |
Placement on Vehicle | Right Rear |
Length | 2160 mm |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Paired article numbers | 04671 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.919 kg |
Placement on Vehicle | Rear Axle |
Length | 104.9 mm |
Width | 42.7 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with brake caliper screws, with fastening material |
Replaces | 16235 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Silver |
Function | Link/Coupling Rod, stabiliser bar |
Inner diameter | 10 mm |
Rod/Strut | Coupling Rod |
Material | Steel |
Length | 119 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.31 kg |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 9 mm |
Weight | 0.380 kg |
Placement on Vehicle | Front Axle Left |
Length | 263 mm |
Material | Steel |
Paired article numbers | 24928 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M12 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PTFE (polytetrafluoroethylene) |
Placement on Vehicle | frontal sided |
Width | 8 mm |
Function | Shaft Seal, crankshaft |
Inner diameter | 55 mm |
Outer diameter | 68 mm |
Weight | 0.02 kg |
Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.26 kg |
Placement on Vehicle | Front Axle Left |
Length | 187 mm |
Material | Steel |
Spanner Size | 18 |
Paired article numbers | 43317 |
Rod/Strut | Coupling Rod |
Colour | Silver |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M10 x 1,25 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.421 kg |
Length | 82 mm |
Material | Rubber |
Inner diameter 1 | 22 mm |
Inner diameter 2 | 83 mm |
Function | Bellow Kit, drive shaft |
Placement on Vehicle | Wheel Side, Front Axle Right |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (02414)
- 1x Febi Circlip (03185)
- 1x Febi Spring Washer (07254)
- 1x Febi Clamping Clip (45644)
- 1x Febi Clamping Clip (38757)
- 1x Febi Screw (03634)
- 1x Febi High Temperature Lubricant (03630)
Important compatibility info
Weight | 0.226 kg |
Placement on Vehicle | transmission sided, Front Axle |
Length | 91 mm |
Material | Rubber |
Inner diameter 1 | 29 mm |
Inner diameter 2 | 67 mm |
Function | Bellow Kit, drive shaft |
Joint Type | Tripod Joint |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (100302)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (29820)
- 1x Febi Molybdenum Grease (02582)
Important compatibility info
Weight | 0.116 kg |
Length | 1370 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Number of Ribs | 5 |
DIN / ISO | 7867 |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.36 kg |
Inner diameter | 45 mm |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25, M10 x 1,25 |
Weight | 0.31 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 135 mm |
Material | Steel |
Spanner Size | 19, 17 |
Rod/Strut | Coupling Rod |
Colour | Silver |
Thread Length | 29.2 mm |
Pipe Diameter | 9 mm |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with washers |
Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 19 mm |
Number of Teeth | 122 |
Belts | with rounded tooth profile |
Function | Timing Belt |
Type | Timing Belt |
Weight | 0.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 104 mm |
Valve stem diameter | 6 mm |
Notches / Holes Number | 3 |
Function | Intake Valve |
Weight | 0.045 kg |
Type | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.380 kg |
Placement on Vehicle | Front Axle Right |
Length | 263 mm |
Material | Steel |
Paired article numbers | 24929 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M12 x 1,25 |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.474 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 150 mm |
Rod/Strut | Coupling Rod |
Bolt Head/Nut Design | Male Hex, Hexagon Socket |
Function | Link/Coupling Rod, stabiliser bar |
Outer diameter | 35 mm |
External Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Weight | 0.38 kg |
Placement on Vehicle | Front Axle Left |
Length | 285 mm |
Paired article numbers | 28672 |
Rod/Strut | Coupling Rod |
Thread Length | 26.7 mm |
Additional Information | with nuts |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 10658 |
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front Axle Left |
Weight | 0.426 kg |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information | with counter nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Filter |
Function | Oil Filter |
Additional Information | with gaskets/seals |
Thickness | 0.5 mm |
Length | 375 mm |
Seal Diameter | 133 mm. 110 mm |
Filter type | Centrifuge |
Width | 63 mm |
Weight | 0.030 kg |
for OE number | 2 386 074 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (172139)
- 1x Febi Gasket, centrifugal cleaner flange (35616)
- 1x Febi Gasket, oil filter housing (05970)
Important compatibility info
Weight | 0.028 kg |
Function | Repair Kit, relay valve |
Type | Repair Kit, relay valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal, Aluminium |
Outer diameter | 35 mm. 24 mm |
Thickness | 66 mm |
Inner diameter | 12 mm |
Placement on Vehicle | Rear Axle Upper, inner |
Weight | 0.087 kg |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 65 mm |
Paired article numbers | 21815 |
Rod/Strut | Coupling Rod |
Material | Steel |
Placement on Vehicle | Front Axle Left |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 0.28 kg |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Type | Stop Light Switch |
Function | Stop Light Switch |
for OE number | 95368628 |
Number of Connectors / Ports | 2 |
Weight | 0.025 kg |
Housing Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.390 kg |
Cone Size | 15.8 mm |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Additional Information | with lock nut |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Function | Ball Head, gearshift linkage |
Internal Thread Size | M10 x 1,5 |
External Thread Size | M10 x 1,5 |
Length | 36 mm |
Cone Size | 13 mm |
Type | Ball Head, gearshift linkage |
Extra Description | ProKit |
Placement on Vehicle | transmission sided |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 575 mm |
Height | 45 mm |
Width | 165 mm |
Filter type | Filter Insert |
Function | Air Filter |
Weight | 0.428 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Internal Thread Size | M12 x 1,5 |
Weight | 0.48 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 174 mm |
Thickness | 50 mm |
Spanner Size | 17 |
Type | Tie Rod End |
Function | Tie Rod End |
Extra Description | ProKit |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023