Important compatibility info
Weight | 2.136 kg |
Type | Joint Kit, drive shaft |
External Teeth, Wheel Side | 36 |
Internal Teeth, wheel side | 26 |
Function | Joint Kit, drive shaft |
Thread Size | M10x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.890 kg |
Placement on Vehicle | Rear Axle |
Length | 164 mm |
Outer diameter | 75 mm |
Steering arm type | for trailing arm |
Mounting points diameter | 19 mm |
Function | Repair Kit, control/trailing arm |
Type | Repair Kit, control/trailing arm |
Additional Information 2 | with spacer disc, with retaining ring |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.31 kg |
Function | Cylinder Head, air compressor |
Type | Cylinder Head, air compressor |
Additional Information 2 | with spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 697 mm |
Additional Information 2 | with crown nut |
Rod/Strut | Push Rod |
Weight | 8.000 kg |
Cone Size | 30 mm |
Adjustable | adjustable |
Pipe Diameter | 52 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.8 kg |
Function | Compressor, air conditioning |
Type | Compressor, air conditioning |
Number of grooves | 8 |
Oil Fill Quantity | 175 ml |
for OE number | 3962650 |
Belt Pulley Diameter | 132 mm |
Pulleys | with belt pulley |
Voltage | 24 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Electric |
Function | V-Ribbed Belt Set |
Weight | 1.481 kg |
Type | V-Ribbed Belt Set |
Length | 894 mm |
Number of Ribs | 6 |
Additional Information | with clamping elements |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38432)
- 1x Febi Belt Tensioner, v-ribbed belt (102601)
- 1x Febi Belt Tensioner, v-ribbed belt (33136)
Important compatibility info
Housing Diameter | 18 mm |
Placement on Vehicle | both sides |
Length | 431 mm |
Eject Force | 425 N |
Stroke | 159 mm |
Piston conrod diameter | 8 mm |
Function | Gas Spring, boot/cargo area |
Weight | 0.203 kg |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Width of castor bearing surface | 32 mm |
Function | Belt Tensioner, V-ribbed belt |
Outer diameter | 75 mm |
Material | Metal |
Type | Belt Tensioner, V-ribbed belt |
Weight | 1.624 kg |
Quantity | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.69 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 27076 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holder |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 66 mm |
Spanner Size | 17 |
Type | Tensioner, timing chain |
Function | Tensioner, timing chain |
External Thread Size | M22 x 1,5 |
Weight | 0.134 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.904 kg |
Type | Wiper Motor |
Placement on Vehicle | Rear |
Voltage | 12 V |
Function | Wiper Motor |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Placement on Vehicle | Right |
Material | Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.848 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 105 mm |
Paired article numbers | 03132 |
Thread Type | with left-hand thread |
Cone Size | 22 mm |
Function | Tie Rod End |
External Thread Size | M18 x 1,5, M24 x 1,5 LHT |
Replaces | 18338 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178061 |
Weight | 1.66 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 41 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 179133 |
Weight | 3.744 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Weight | 0.03 kg |
Material | Rubber |
Inner diameter | 12 mm |
Function | Mounting, stabiliser bar |
Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.866 kg |
Material | Cast Aluminium |
Number of Teeth | 19 |
Number of Wings | 12 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber |
Additional Information 2 | with seal ring |
for OE number | 13 34 024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 131.4 mm |
Width | 65.3 mm. 53.5 mm |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.6 mm |
Function | Brake Pad Set, disc brake |
Weight | 1.428 kg |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Inner diameter | 55 mm |
Function | Suspension, propshaft |
for OE number | 123 410 10 81 |
Weight | 0.43 kg |
Type | Suspension, propshaft |
Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, coolant temperature |
Type | Sensor, coolant temperature |
Colour | Black |
Number of Connectors / Ports | 3 |
Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023