Important compatibility info
Weight | 0.44 kg |
Placement on Vehicle | transmission sided, Rear Axle |
Length | 98 mm |
Material | Rubber |
Inner diameter 1 | 30 mm |
Inner diameter 2 | 60 mm |
Function | Bellow Kit, drive shaft |
Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38764)
- 1x Febi Clamping Clip (38759)
- 1x Febi Molybdenum Grease (08414)
- 1x Febi Bellow, drive shaft (36512)
- 1x Febi Nut, kingpin (02346)
- 1x Febi Nut, kingpin (01841)
- 1x Febi Circlip (02596)
Important compatibility info
Filter type | In-Line Filter |
Pipe Diameter | 7.89 mm |
Function | Fuel filter |
Height | 131 mm |
Outer diameter | 88 mm |
Weight | 0.33 kg |
Type | Fuel filter |
Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter, cabin air |
Width | 209 mm |
Filter type | Activated Carbon Filter |
Type | Filter, cabin air |
Weight | 0.15 kg |
Length | 250 mm |
Height | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.492 kg |
Outer diameter | 35 mm |
Bolt Hole Circle Diameter | 110 mm |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing, with wheel studs |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.300 kg |
Placement on Vehicle | Front Axle Right |
Length | 90 mm |
Paired article numbers | 19605 |
Function | Tie Rod End |
Extra Description | ProKit |
Type | Tie Rod End |
External Thread Size | M10 x 1,25 |
Internal Thread Size | M14 x 1,5 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
for OE number | 55566086 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 3 mm |
Material | FKM (fluorocarbon rubber) |
Inner diameter | 52 mm |
Weight | 0.002 kg |
Type | Seal, camshaft adjustment |
Function | Seal, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 45 mm. 63 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 15 mm |
Min. Length | 228 mm |
Operating Mode | Mechanical |
Function | Shock Absorber, driver cab suspension |
Max. Length | 296 mm |
Weight | 3.35 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Placement on Vehicle | Rear |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Number of Teeth, ABS ring | 44 |
External Thread Size | M24 x 1,5 |
Length | 157 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 2.780 kg |
Internal Teeth, wheel side | 36 |
Seal Diameter | 65 mm |
External Teeth, Wheel Side | 31 |
Outer diameter | 93 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Ribs | 6 |
Pulleys | with freewheel belt pulley |
Alternator Charge Current | 140 A |
Belt Pulley Diameter | 48 mm |
Weight | 7.3 kg |
Current Strength | 140 A |
Type | Alternator |
Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.07 kg |
Placement on Vehicle | non-steered leading axle |
Function | Bellow, air suspension |
External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5 |
Outer diameter | 229 mm. 198 mm |
Thickness | 249 mm. 565 mm |
Type | Bellow, air suspension |
Additional Information | with piston rod, with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Cone Size | 24 mm |
Function | Ball Joint |
Mounting points diameter | 12.5 mm |
Weight | 0.840 kg |
External Thread Size | M16 x 1,5 |
Extra Description | ProKit |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.057 kg |
Placement on Vehicle | Front Axle Right |
Length | 185 mm |
Material | Thermoplast |
Inner diameter 2 | 39 mm |
Type | Bellow Kit, steering |
Function | Bellow Kit, steering |
Inner diameter 1 | 13 mm |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, steering (101865)
- 1x Febi Clamping Clip (38755)
- 1x Febi Clamping Clip (38760)
Important compatibility info
Weight | 0.34 kg |
Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
Length | 92 mm |
Material | Rubber/Metal |
Colour Coding | White |
Function | Bushing, leaf spring |
Type | Bushing, leaf spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Idle Control Valve, air supply |
Weight | 0.08 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 4 |
Type | Idle Control Valve, air supply |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Weight | 1.154 kg |
Placement on Vehicle | Rear, both sides |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.315 kg |
Outer diameter | 70 mm |
Material | Metal |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.77 kg |
Placement on Vehicle | Front Axle Left |
Length | 131 mm |
Material | Rubber/Metal |
Paired article numbers | 104215 |
Type | Repair Kit, suspension strut support mount |
Function | Repair Kit, suspension strut support mount |
Height | 65 mm |
Width | 119 mm |
Additional Information 2 | with ball bearing |
Inner diameter | 33 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Disc Thickness | 24 mm |
Function | Brake Disc |
Placement on Vehicle | Front Axle |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 65 mm |
Weight | 6.8 kg |
Minimum thickness | 21 mm |
Surface | Coated |
Outer diameter | 276 mm |
Thickness | 49.6 mm |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
Material | Sheet Steel |
Steering arm type | Control Arm |
Weight | 1.221 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023